UMET - Liste des publications de Jean-Michel GLOAGUEN

Publications dans des revues internationales

• 2021
  25. A. Mesbah, M. Elmeguenni, Z. Yan, F. Zairi, N. Ding, J.-M. Gloaguen, How stress triaxiality affects cavitation damage in high-density polyethylene: experiments and constitutive modeling, Polymer Testing 100, - (2021), [doi: 10.1016/j.polymertesting.2021.107248, LillOA]
  24. R. Boulahia, F. Zairi, Y. Voznyak, J.-M. Gloaguen, Repeated equal-channel angular extrusion of polypropylene: processing routes and back-pressure influence 26, - (2021), [doi: 10.1016/j.mtcomm.2020.101754, LillOA]
• 2020
  23. M.N.D. Cherief, F. Zairi, N. Ding, J.-M. Gloaguen, M. Nait-Abdelaziz, M. Benguediab, Plasticity and thermally-induced recovery in polycarbonate, Mechanics of materials . an international journal 148, (2020), [doi: 10.1016/j.mechmat.2020.103515, LillOA]
  22. A. Dinari, M. Chaabane, T. Benameur, Q. Guo, J.-M. Gloaguen, F. Zairi, Multiscale observation of the fatigue-induced damage mechanisms in carbon-black filled styrene-butadiene rubber, Macromolecular Materials and Engineering -, (2020), [doi: 10.1002/mame.202000227, LillOA]
• 2015
  21. K. Anoukou, A. Zaoui, F. Zairi, M. Naït-Abdelaziz, J.-M. Gloaguen, Structural and thermodynamics properties of organo-modified montmorillonite clay, Physica E. Low-dimensional Systems and Nanostructures 65, 56-60 (2015), [doi: 10.1016/j.physe.2014.07.025, LillOA]
• 2014
  20. G. Ayoub, F. Zairi, M. Naït-Abdelaziz, J.-M. Gloaguen, G. Kridli, A visco-hyperelastic damage model for cyclic stress-softening, hysteresis and permanent set in rubber using the network alteration theory, International Journal of Plasticity 54, 19-33 (2014), [doi: 10.1016/j.ijplas.2013.08.001, LillOA]
  19. A. Mesbah, F. Zairi, M. Naït-Abdelaziz, J.-M. Gloaguen, K. Anoukou, A. Zaoui, Z. Qu, T. Boukharouba, J.-M. Lefebvre, Micromechanics-based constitutive modeling of plastic yielding and damage mechanisms in polymer-clay nanocomposites: Application to polyamide-6 and polypropylene-based nanocomposites, Composites Science and Technology 101, 71-78 (2014), [doi: 10.1016/j.compscitech.2014.05.032, LillOA]
  18. K. Anoukou, F. Zairi, M. Naït-Abdelaziz, A. Zaoui, Z. Qu, J.-M. Gloaguen, J.-M. Lefebvre, A micromechanical model taking into account the contribution of α- and γ-crystalline phases in the stiffening of polyamide 6-clay nanocomposites: A closed-formulation including the crystal symmetry, Composites Part B. Engineering 64, 84-96 (2014), [doi: 10.1016/j.compositesb.2014.01.012, LillOA]
  17. K. Hachour, F. Zairi, M. Naït-Abdelaziz, J.-M. Gloaguen, M. Aberkane, J.-M. Lefebvre, Experiments and modeling of high-crystalline polyethylene yielding under different stress states, International Journal of Plasticity 54, 1-18 (2014), [doi: 10.1016/j.ijplas.2013.06.004, LillOA]
  16. F. Bouaksa, C. Ovalle Rodas, F. Zairi, G. Stoclet, M. Naït-Abdelaziz, J.-M. Gloaguen, T. Tamine, J.-M. Lefebvre, Molecular chain orientation in polycarbonate during equal channel angular extrusion: Experiments and simulations, Computational Materials Science 85, 244-252 (2014), [doi: 10.1016/j.commatsci.2013.12.028, LillOA]
• 2013
  15. M. Elmeguenni, M. Naït-Abdelaziz, F. Zairi, J.-M. Gloaguen, Fracture characterization of high-density polyethylene pipe materials using the J-integral and the essential work of fracture, International Journal of Fracture 183, 119-133 (2013), [doi: 10.1007/s10704-013-9848-x, LillOA]
  14. K. Anoukou, A. Zaoui, F. Zairi, M. Naït-Abdelaziz, J.-M. Gloaguen, Molecular dynamics study of the polymer clay nanocomposites (PCNs): Elastic constants and basal spacing predictions, Computational Materials Science 77, 417-423 (2013), [doi: 10.1016/j.commatsci.2013.04.015, LillOA]
• 2012
  13. G. Ayoub, M. Naït-Abdelaziz, F. Zairi, J.-M. Gloaguen, P. Charrier, Fatigue life prediction of rubber-like materials under multiaxial loading using a continuum damage mechanics approach: Effects of two-blocks loading and R ratio, Mechanics of Materials 52, 87-102 (2012), [doi: 10.1016/j.mechmat.2012.03.012, LillOA]
• 2011
  12. G. Ayoub, M. Naït-Abdelaziz, F. Zairi, J.-M. Gloaguen, P. Charrier, A continuum damage model for the high-cycle fatigue life prediction of styrene-butadiene rubber under multiaxial loading, International Journal of Solids and Structures 48, 2458-2466 (2011), [doi: 10.1016/j.ijsolstr.2011.04.003, LillOA]
  11. F. Zairi, J.-M. Gloaguen, M. Naït-Abdelaziz, A. Mesbah, J.-M. Lefebvre, Study of the effect of size and clay structural parameters on the yield and post-yield response of polymer/clay nanocomposites via a multiscale micromechanical modelling, Acta Materialia 59, 3851-3863 (2011), [doi: 10.1016/j.actamat.2011.03.009, LillOA]
  10. G. Ayoub, F. Zairi, C. Fréderix, J.-M. Gloaguen, M. Naït-Abdelaziz, R. Séguéla, J.-M. Lefebvre, Effects of crystal content on the mechanical behaviour of polyethylene under finite strains: Experiments and constitutive modelling, International Journal of Plasticity 27, 492-511 (2011), [doi: 10.1016/j.ijplas.2010.07.005, LillOA]
  9. G. Ayoub, F. Zairi, M. Naït-Abdelaziz, J.-M. Gloaguen, Modeling the low-cycle fatigue behavior of visco-hyperelastic elastomeric materials using a new network alteration theory: Application to styrene-butadiene rubber, Journal of the Mechanics and Physics of Solids 59, 473-495 (2011), [doi: 10.1016/j.jmps.2010.09.016, LillOA]
  8. K. Anoukou, F. Zairi, M. NAIT ABDELAZIZ, A. Zaoui, T. Messager, J.-M. Gloaguen, On the overall elastic moduli of polymer-clay nanocomposite materials using a self-consistent approach. Part I: Theory, Composites Science and Technology 71, 197-205 (2011), [doi: 10.1016/j.compscitech.2010.11.018, LillOA]
  7. K. Anoukou, F. Zairi, M. Naït-Abdelaziz, A. Zaoui, T. Messager, J.-M. Gloaguen, On the overall elastic moduli of polymer-clay nanocomposite materials using a self-consistent approach. Part II: Experimental verification, Composites Science and Technology 71, 206-215 (2011), [doi: 10.1016/j.compscitech.2010.11.020, LillOA]
  6. F. Zairi, M. Naït-Abdelaziz, J.-M. Gloaguen, J.-M. Lefebvre, A physically-based constitutive model for anisotropic damage in rubber-toughened glassy polymers during finite deformation, International Journal of Plasticity 27, 25-51 (2011), [doi: 10.1016/j.ijplas.2010.03.007, LillOA]
• 2010
  5. S. Belbachir, F. Zairi, G. Ayoub, U. Maschke, M. Naït-Abdelaziz, J.-M. Gloaguen, M. Benguediab, J.-M. Lefebvre, Modelling of photodegradation effect on elastic-viscoplastic behaviour of amorphous polylactic acid films, Journal of the Mechanics and Physics of Solids 58, 241-255 (2010), [doi: 10.1016/j.jmps.2009.10.003, LillOA]
  4. G. Ayoub, M. NAIT ABDELAZIZ, F. Zairi, J.-M. Gloaguen, Multiaxial fatigue life prediction of rubber-like materials using the continuum damage mechanics approach, Procedia Engineering 2, 985-993 (2010), [doi: 10.1016/j.proeng.2010.03.107, LillOA]
  3. G. Ayoub, F. Zairi, M. Naït-Abdelaziz, J.-M. Gloaguen, Modelling large deformation behaviour under loading-unloading of semicrystalline polymers: Application to a high density polyethylene, International Journal of Plasticity 26, 329-347 (2010), [doi: 10.1016/j.ijplas.2009.07.005, LillOA]
  2. G. Ayoub, F. Zairi, C. Fréderix, J.-M. Gloaguen, M. NAIT ABDELAZIZ, R. Séguéla, J.-M. Lefebvre, Modelling finite deformation stress-strain response during loadingunloading of polyethylene over a wide range of crystallinities, Procedia Engineering 2, 977-984 (2010), [doi: 10.1016/j.proeng.2010.03.106, LillOA]
  1. F. Zairi, M. Naït-Abdelaziz, J.-M. Gloaguen, J.-M. Lefebvre, Constitutive modelling of the large inelastic deformation behaviour of rubber-toughened poly(methyl methacrylate): effects of strain rate, temperature and rubber-phase volume fraction, Modelling and Simulation in Materials Science and Engineering 18, 55004 (2010), [doi: 10.1088/0965-0393/18/5/055004, LillOA]