UMET - Liste des publications de Gang JI

Publications in international research journals

• 2024
  103. A. Fellenberg, A. Addad, S.A. Chernyak, Z. Yong, M. Corda, D. Oliveira De Souza, O.V. Safonova, V. Martin-Diaconescu, V. Ordomsky, G. Ji, A. Khodakov, Covalent organic frameworks for design of ruthenium catalysts with high single-atom site density for CO 2 hydrogenation into formic acid, Cell Rep. Phys. Sci. 5, - (2024), [doi: 10.1016/j.xcrp.2024.101926, LillOA]
• 2023
  102. C. Dan, Y. Cui, Y. Wu, Z. Chen, H. Liu, G. Ji, Y. Xiao, H. Chen, M. Wang, J. Liu, L. Wang, Y. Li, A. Addad, Y. Zhou, S. Ma, Q. Shi, H. Wang, J. Lu, Achieving ultrahigh fatigue resistance in AlSi10Mg alloy by additive manufacturing, Nature Materials (2023), [doi: 10.1038/s41563-023-01651-9, LillOA]
  101. H. Chen, Y. Chen, Y. Tang, G. Ji, Y. Bréchet, S. Zhong, H. Wang, G. Yan, Z. Chen, Quantitative assessment of the influence of the Portevin-Le Chatelier effect on the flow stress in precipitation hardening AlMgScZr alloys, ACTA MATERIALIA 255, 119060 (2023), [doi: 10.1016/j.actamat.2023.119060, LillOA]
  100. Y. Ma, H. Chen, M.-X. Zhang, A. Addad, Y. Kong, M.B. Lezaack, W. Gan, Z. Chen, G. Ji, Y. Ma, Break through the strength-ductility trade-off dilemma in aluminum matrix composites via precipitation-assisted interface tailoring, ACTA MATERIALIA 242, 118470 (2023), [doi: 10.1016/j.actamat.2022.118470, LillOA]
• 2022
  99. J. Zhang, Y. Jiang, C. Hu, G. Ji, C. Song, Q. Zhai, J. Zhang, Effect of Cr on Phase Transformation Behavior of Austenite in Fe-20Mn-9Al-1.2C-xCr Low-Density Steels During Isothermal Aging, Metals and Materials International 28;11, 2583-2595 (2022), [doi: 10.1007/s12540-022-01167-y, LillOA]
  98. X. Dong, L. Feng, S. Wang, F. Wang, R. Ghasemi, G. Ji, E.A. Nyberg, S. Ji, A quantitative strategy for achieving the high thermal conductivity of die-cast Mg-Al-based alloys, Materialia 22, 101426 (2022), [doi: 10.1016/j.mtla.2022.101426, LillOA]
  97. X. Dong, L. Feng, S. Wang, G. Ji, A. Addad, H. Yang, E.A. Nyberg, S. Ji, On the exceptional creep resistance in a die-cast Gd-containing Mg alloy with Al addition, Acta Materialia 232, 117957 (2022), [doi: 10.1016/j.actamat.2022.117957, LillOA]
  96. J. Zhang, Y. Liu, C. Hu, Y. Jiang, A. Addad, G. Ji, C. Song, Q. Zhai, J. Zhang, The effect of Cr content on intragranular κ-carbide precipitation in Fe-Mn-Al-(Cr)-C low-density steels: A multiscale investigation, Materials Characterization 186, 111801 (2022), [doi: 10.1016/j.matchar.2022.111801, LillOA]
  95. J. Zhang, Y. Liu, C. Hu, A. Addad, A. Montagne, G. Ji, C. Song, Q. Zhai, J. Zhang, Probing the effect of intragranular premature κ-carbide on incipient plasticity behavior in austenite-based Fe-Mn-Al-(Cr)-C steels, Materials Research Letters 10;3, 141-148 (2022), [doi: 10.1080/21663831.2022.2027034, LillOA]
• 2021
  94. A. Fellenberg, A. Addad, J. Hong, P. Simon, Y. Kosto, B. Šmíd, G. Ji, A. Khodakov, Iron and Copper Nanoparticles Inside and Outside Carbon Nanotubes: Nanoconfinement, Migration, Interaction and Catalytic Performance in Fischer-Tropsch Synthesis, Journal of Catalysis (2021), [doi: 10.1016/j.jcat.2021.09.034, LillOA]
  93. G. Serghiou, N. Odling, H.J. Reichmann, G. Ji, M. Koch‐Müller, D.J. Frost, J.P. Wright, R. Boehler, W. Morgenroth, Hexagonal Si−Ge Class of Semiconducting Alloys Prepared by Using Pressure and Temperature, Chemistry – A European Journal 27;57, (2021), [doi: 10.1002/chem.202102595, LillOA]
  92. H. Chen, Z. Chen, G. Ji, S. Zhong, H. Wang, A. Borbély, Y. Ke, Y. Bréchet, The influence of shearable and nonshearable precipitates on the Portevin-Le Chatelier behavior in precipitation hardening AlMgScZr alloys, International Journal of Plasticity 147, 103120 (2021), [doi: 10.1016/j.ijplas.2021.103120, LillOA]
  91. X. Xie, C. Chen, Z. Chen, A. Addad, Y. Xie, H. Wu, C. Verdy, Y. Wang, J. Wang, Z. Ren, G. Ji, H. Liao, Effect of annealing treatment on microstructure and mechanical properties of cold sprayed TiB2/AlSi10Mg composites, Surfaces and Interfaces 26, 101341 (2021), [doi: 10.1016/j.surfin.2021.101341, LillOA]
  90. Z. Shen, G. Ji, A. Addad, C. Labrugere, Y. Lu, J.-F. Silvain, Tailoring the microstructure of an oriented graphite flake/Al composite produced by powder metallurgy for achieving high thermal conductivity, Diamond and Related Materials 118, 108513 (2021), [doi: 10.1016/j.diamond.2021.108513, LillOA]
  89. X. Xie, S. Yin, R.-n. Raoelison, C. Chen, C. Verdy, W. Li, G. Ji, Z. Ren, H. Liao, Al matrix composites fabricated by solid-state cold spray deposition: A critical review, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 86, 20-55 (2021), [doi: 10.1016/j.jmst.2021.01.026, LillOA]
  88. J. Zhang, Y. Jiang, W. Zheng, Y. Liu, A. Addad, G. Ji, C. Song, Q. Zhai, Revisiting the formation mechanism of intragranular κ-carbide in austenite of a Fe-Mn-Al-Cr-C low-density steel, Scripta Materialia 199, 113836 (2021), [doi: 10.1016/j.scriptamat.2021.113836, LillOA]
  87. H. Chen, Z. Chen, G. Ji, S. Zhong, H. Wang, A. Borbély, Y. Ke, Y. Bréchet, Experimental and modelling assessment of ductility in a precipitation hardening AlMgScZr alloy, International Journal of Plasticity 139, 102971 (2021), [doi: 10.1016/j.ijplas.2021.102971, LillOA]
  86. J. Liu, Q. Zhang, Z. Chen, L. Wang, G. Ji, Q. Shi, Y. Wu, F. Zhang, H. Wang, Fabrication of fine grain structures in Al matrices at elevated temperature by the stimulation of dual-size particles, Materials Science and Engineering: A 805, 140614 (2021), [doi: 10.1016/j.msea.2020.140614, LillOA]
  85. X. Xie, Z. Tan, C. Chen, Y. Xie, H. Wu, X. Yan, S. Gao, Z. Li, G. Ji, H. Liao, Synthesis of carbon nanotube reinforced Al matrix composite coatings via cold spray deposition, Surface and Coatings Technology 405, 126676 (2021), [doi: 10.1016/j.surfcoat.2020.126676, LillOA]
• 2020
  84. J.-l. Zhang, C.-h. Hu, Y.-x. Liu, Y. Yang, G. Ji, C.-j. Song, Q.-j. Zhai, Precipitation strengthening of nano-scale TiC in a duplex low-density steel under near-rapid solidification, Journal of Iron and Steel Research International (2020), [doi: 10.1007/s42243-020-00511-z, LillOA]
  83. X. Xie, B. Hosni, C. Chen, H. Wu, Y. Li, Z. Chen, C. Verdy, O.E. Kedim, Q. Zhong, A. Addad, C. Coddet, G. Ji, H. Liao, Corrosion behavior of cold sprayed 7075Al composite coating reinforced with TiB2 nanoparticles, Surface and Coatings Technology 404, 126460 (2020), [doi: 10.1016/j.surfcoat.2020.126460, LillOA]
  82. S. Dadbakhsh, R. Mertens, G. Ji, B. Vrancken, K. Vanmeensel, H. Fan, A. Addad, J.-P. Kruth, Heat treatment possibilities for an in situ βTi-TiC composite made by laser powder bed fusion, Additive Manufacturing 101577 (2020), [doi: 10.1016/j.addma.2020.101577, LillOA]
  81. X. Xie, C. Chen, Z. Chen, W. Wang, S. Yin, G. Ji, H. Liao, Achieving simultaneously improved tensile strength and ductility of a nano-TiB2/AlSi10Mg composite produced by cold spray additive manufacturing, Composites Part B: Engineering 108404 (2020), [doi: 10.1016/j.compositesb.2020.108404, LillOA]
  80. S. Dadbakhsh, R. Mertens, K. Vanmeensel, G. Ji, J.-P. Kruth, In situ transformations during SLM of an ultra-strong TiC reinforced Ti composite, Scientific Reports 10;1, (2020), [doi: 10.1038/s41598-020-67434-3, LillOA]
  79. Z. Shen, G. Ji, J.-F. Silvain, From 1D to 2D arrangements of graphite flakes in an aluminium matrix composite: Impact on thermal properties, Scripta Materialia 86-90 (2020), [doi: 10.1016/j.scriptamat.2020.03.022, LillOA]
  78. M.L. Montero-Sistiaga, Z. Liu, L. Bautmans, G. Ji, S. Nardone, J.-P. Kruth, J. Van Humbeeck, K. Vanmeensel, Effect of temperature on the microstructure and tensile properties of micro-crack free hastelloy X produced by selective laser melting, Additive Manufacturing 100995 (2020), [doi: 10.1016/j.addma.2019.100995, LillOA]
  77. X. Xie, Y. Ma, C. Chen, G. Ji, C. Verdy, H. Wu, Z. Chen, S. Yuan, B. Normand, S. Yin, H. Liao, Cold spray additive manufacturing of metal matrix composites (MMCs) using a novel nano-TiB2-reinforced 7075Al powder, Journal of Alloys and Compounds 152962 (2020), [doi: 10.1016/j.jallcom.2019.152962, LillOA]
  76. Y. Ma, A. Addad, G. Ji, M.-X. Zhang, W. Lefebvre, Z. Chen, V. Ji, Atomic-scale investigation of the interface precipitation in a TiB2 nanoparticles reinforced Al-Zn-Mg-Cu matrix composite, Acta Materialia (2020), [doi: 10.1016/j.actamat.2019.11.068, LillOA]
• 2019
  75. X. Fu, R. Xu, C. Yuan, Z. Tan, G. Fan, G. Ji, D.-B. Xiong, Q. Guo, Z. Li, D. Zhang, Strain Rate Sensitivity and Deformation Mechanism of Carbon Nanotubes Reinforced Aluminum Composites, Metallurgical and Materials Transactions A 50;8, 3544-3554 (2019), [doi: 10.1007/s11661-019-05284-z, LillOA]
  74. L. Pittarello, S. McKibbin, A. Yamaguchi, G. Ji, D. Schryvers, V. Debaille, P. Claeys, Two generations of exsolution lamellae in pyroxene from Asuka 09545: Clues to the thermal evolution of silicates in mesosiderite, American Mineralogist 104;11, 1663-1672 (2019), [doi: 10.2138/am-2019-7001, LillOA]
  73. Q. Yang, Y. Ma, Z. Chen, G. Ji, M. Wang, S. Zhong, Y. Wu, V. Ji, H. Wang, A new powder metallurgy routine to fabricate TiB2/Al–Zn–Mg–Cu nanocomposites based on composite powders with pre-embedded nanoparticles, Materialia 100458 (2019), [doi: 10.1016/j.mtla.2019.100458, LillOA]
  72. Y. Ma, J. Geng, Z. Chen, M. Wang, D. Chen, G. Ji, V. Ji, H. Wang, Experimental study of the mechanisms of nanoparticle influencing the fatigue crack growth in an in-situ TiB2/Al-Zn-Mg-Cu composite, Engineering Fracture Mechanics 23-35 (2019), [doi: 10.1016/j.engfracmech.2018.12.011, LillOA]
  71. R. Xu, Z. Tan, G. Fan, G. Ji, Z. Li, Q. Guo, Z. Li, D. Zhang, Microstructure-based modeling on structure-mechanical property relationships in carbon nanotube/aluminum composites, International Journal of Plasticity 278-295 (2019), [doi: 10.1016/j.ijplas.2019.05.006, LillOA]
  70. X. Xie, C. Chen, G. Ji, R. Xu, Z. Tan, Y. Xie, Z. Li, H. Liao, A novel approach for fabricating a CNT/AlSi composite with the self-aligned nacre-like architecture by cold spraying, Nano Materials Science 137-141 (2019), [doi: 10.1016/j.nanoms.2019.04.002, LillOA]
  69. X. Xie, C. Chen, Y. Ma, Y. Xie, H. Wu, G. Ji, E. Aubry, Z. Ren, H. Liao, Influence of annealing treatment on microstructure and magnetic properties of cold sprayed Ni-coated FeSiAl soft magnetic composite coating, Surface and Coatings Technology 476-484 (2019), [doi: 10.1016/j.surfcoat.2019.05.008, LillOA]
  68. X. Xie, C. Chen, Y. Xie, E. Aubry, Z. Ren, G. Ji, H. Liao, Comparative investigation of microstructure and properties of Ni-coated FeSiAl soft magnetic composite coatings produced by cold spraying and HVOF, Surface and Coatings Technology 224-234 (2019), [doi: 10.1016/j.surfcoat.2018.12.067, LillOA]
  67. Y. Xiao, Z. Bian, Y. Wu, G. Ji, Y. Li, M. Li, Q. Lian, Z. Chen, A. Addad, Effect of nano-TiB2 particles on the anisotropy in an AlSi10Mg alloy processed by selective laser melting, Journal of Alloys and Compounds (2019), [doi: 10.1016/j.jallcom.2019.05.279, LillOA]
  66. H. Cao, Z. Tan, M.-H. Lu, G. Ji, X.-J. Yan, C. Di, M. Yuan, Q. Guo, Y. Su, A. Addad, Z. Li, D.-B. Xiong, Graphene interlayer for enhanced interface thermal conductance in metal matrix composites: An approach beyond surface metallization and matrix alloying, Carbon 60-68 (2019), [doi: 10.1016/j.carbon.2019.05.004, LillOA]
  65. Z. Yu, Z. Tan, R. Xu, G. Ji, G. Fan, D.-B. Xiong, Q. Guo, Z. Li, D. Zhang, Enhanced load transfer by designing mechanical interfacial bonding in carbon nanotube reinforced aluminum composites, Carbon 155-161 (2019), [doi: 10.1016/j.carbon.2019.01.108, LillOA]
  64. D. Bhat Panemangalore, R. Shabadi, M. Gupta, G. Ji, Effect of fluoride coatings on the corrosion behavior of Mg–Zn–Er alloys, Surfaces and Interfaces 72-81 (2019), [doi: 10.1016/j.surfin.2018.11.007, LillOA]
  63. Y. Ma, G. Ji, X. Li, C. Chen, Z. Tan, A. Addad, Z. Li, T. Sercombe, J. Kruth, On the study of tailorable interface structure in a diamond/Al12Si composite processed by selective laser melting, Materialia 100242 (2019), [doi: 10.1016/j.mtla.2019.100242, LillOA]
  62. C. Dan, Z. Chen, G. Ji, S. Zhong, J. Li, X. Li, F. Brisset, G. Sun, H. Wang, V. Ji, Cube orientation bands observed in largely deformed Al-Sc alloys containing shearable precipitates, Scripta Materialia 139-143 (2019), [doi: 10.1016/j.scriptamat.2019.03.018, LillOA]
  61. Y. Jiang, R. Xu, Z.Q. Tan, G. Ji, G. Fan, Z. Li, D.-B. Xiong, Q. Guo, Z.Q. Li, D. Zhang, Interface-induced strain hardening of graphene nanosheet/aluminum composites, Carbon 146, 17-27 (2019), [doi: 10.1016/j.carbon.2019.01.094, LillOA]
  60. Y. Ma, J. Geng, Z. Chen, M. Wang, D. Chen, G. Ji, V. Ji, H. Wang, Experimental study of the mechanisms of nanoparticle influencing the fatigue crack growth in an in-situ TiB2/Al-Zn-Mg-Cu composite, Engineering Fracture Mechanics 207, 23-35 (2019), [doi: 10.1016/j.engfracmech.2018.12.011, LillOA]
  59. D. Bhat Panemangalore, R. Shabadi, D. Tingaud, M. Touzin, G. Ji, Biocompatible silica-based magnesium composites, Journal of Alloys and Compounds 772, 49-57 (2019), [doi: 10.1016/j.jallcom.2018.09.060, LillOA]
• 2018
  58. Y. Ma, G. Ji, Z. Chen, A. Addad, V. Ji, On the Study of a TiB2 Nanoparticle Reinforced 7075Al Composite with High Tensile Strength and Unprecedented Ductility, Materials Science Forum 941, 1933-1938 (2018), [doi: 10.4028/www.scientific.net/MSF.941.1933, LillOA]
  57. G. Ji, Z.Q. Tan, X.P. Li, Z.Q. Li, J.-P. Kruth, Fabrication and Tailoring Interface Structure of Diamond/Al(and Al12Si) Composites for Heat Sink Applications by Vacuum Hot Pressing and Selective Laser Melting, Materials Science Forum 941, 2184-2189 (2018), [doi: 10.4028/www.scientific.net/MSF.941.2184, LillOA]
  56. X.L. Xie, Y.C. Xie, Z.Q. Tan, C.Y. Chen, J. Wang, Z.Q. Li, X.P. Li, G. Ji, H. Liao, Additive Manufacturing of a CNT/Al6Si Composite with the Nanolaminated Architecture via Cold Spray Deposition, Materials Science Forum 941, 2173-2177 (2018), [doi: 10.4028/www.scientific.net/MSF.941.2173, LillOA]
  55. D. Bhat Panemangalore, R. Shabadi, M. Gupta, R. Ambat, G. Ji, A. Addad, L. Lesven, Microstructure and Corrosion Behavior of Extruded Mg-Zn-Er Alloys, Materials Science Forum 941, 1766-1771 (2018), [doi: 10.4028/www.scientific.net/MSF.941.1766, LillOA]
  54. X.P. Li, G. Ji, K. Eder, L. Yang, A. Addad, J. Vleugels, J. Van Humbeeck, J. Cairney, J.-P. Kruth, Additive manufacturing of a novel alpha titanium alloy from commercially pure titanium with minor addition of Mo2C, Materialia 4, 227-236 (2018), [doi: 10.1016/j.mtla.2018.09.033, LillOA]
  53. D. Bhat Panemangalore, R. Shabadi, M. Gupta, G. Ji, Effect of fluoride coatings on the corrosion behavior of Mg-Zn-Er alloys, Surfaces and Interfaces (2018), [doi: 10.1016/j.surfin.2018.11.007, LillOA]
  52. C.Y. Chen, X.L. Xie, Y.C. Xie, M.-P. Planche, S. Deng, G. Ji, E. Aubry, Z. Ren, H. Liao, Cold spraying of thermally softened Ni-coated FeSiAl composite powder: Microstructure characterization, tribological performance and magnetic property, Materials & Design 160, 270-283 (2018), [doi: 10.1016/j.matdes.2018.09.025, LillOA]
  51. J. Liu, Z. Chen, F. Zhang, G. Ji, Y. Ma, M. Wang, S. Zhong, J. Li, H. Wang, H. Wang, Improved structural homogeneity and mechanical properties of nanoparticles reinforced Al composites after orthogonal thermomechanical processes, Journal of Alloys and Compounds 767, 293-301 (2018), [doi: 10.1016/j.jallcom.2018.07.083, LillOA]
  50. R. Xu, Z.Q. Tan, G. Fan, G. Ji, D.-B. Xiong, Q. Guo, Y. Su, Z.Q. Li, D. Zhang, High-strength CNT/Al-Zn-Mg-Cu composites with improved ductility achieved by flake powder metallurgy via elemental alloying, Composites Part A. Applied Science and Manufacturing 111, 1-11 (2018), [doi: 10.1016/j.compositesa.2018.05.012, LillOA]
  49. J. Liu, Z. Chen, F. Zhang, G. Ji, M. Wang, Y. Ma, V. Ji, S. Zhong, Y. Wu, H. Wang, Simultaneously increasing strength and ductility of nanoparticles reinforced Al composites via accumulative orthogonal extrusion process, Materials Research Letters 6, 406-412 (2018), [doi: 10.1080/21663831.2018.1471421, LillOA]
  48. X.L. Xie, C.Y. Chen, Y.C. Xie, Z. Ren, E. Aubry, G. Ji, H. Liao, A novel approach for fabricating Ni-coated FeSiAl soft magnetic composite via cold spraying, Journal of Alloys and Compounds 749, 523-533 (2018), [doi: 10.1016/j.jallcom.2018.03.306, LillOA]
  47. Z.Q. Tan, D.-B. Xiong, G. Fan, Z. Chen, Q. Guo, C. Guo, G. Ji, Z.Q. Li, D. Zhang, Enhanced thermal conductivity of diamond/aluminum composites through tuning diamond particle dispersion, Journal of Materials Science 53, 6602-6612 (2018), [doi: 10.1007/s10853-018-2024-y, LillOA]
  46. S. Liu, K. Li, J. Lu, G. Sha, J. Wang, M. Yang, G. Ji, M. Song, J. Wang, Y. Du, On the atomic model of Guinier-Preston zones in Al-Mg-Si-Cu alloys, Journal of Alloys and Compounds 745, 644-650 (2018), [doi: 10.1016/j.jallcom.2018.01.304, LillOA]
  45. C. Dan, Z. Chen, M. Mathon, G. Ji, L. Li, Y. Wu, F. Brisset, L. Guo, H. Wang, V. Ji, Cold rolling texture evolution of TiB 2 particle reinforced Al-based composites by Neutron Diffraction and EBSD analysis, Materials Characterization 136, 293-301 (2018), [doi: 10.1016/j.matchar.2017.12.028, LillOA]
  44. R. Xu, G. Fan, Z.Q. Tan, G. Ji, C. Chen, B. Beausir, D.-B. Xiong, Q. Guo, C. Guo, Z.Q. Li, D. Zhang, Back stress in strain hardening of carbon nanotube/aluminum composites, Materials Research Letters 6, 113-120 (2018), [doi: 10.1080/21663831.2017.1405371, LillOA]
• 2017
  43. X. Ju, F. Zhang, Z. Chen, G. Ji, M. Wang, Y. Wu, S. Zhong, H. Wang, Microstructure of Multi-Pass Friction-Stir-Processed Al-Zn-Mg-Cu Alloys Reinforced by Nano-Sized TiB2 Particles and the Effect of T6 Heat Treatment, Metals 7, 530 (2017), [doi: 10.3390/met7120530, LillOA]
  42. C. Dan, Z. Chen, G. Ji, S. Zhong, Y. Wu, F. Brisset, H. Wang, V. Ji, Microstructure study of cold rolling nanosized in-situ TiB 2 particle reinforced Al composites, Materials & Design 130, 357-365 (2017), [doi: 10.1016/j.matdes.2017.05.076, LillOA]
  41. M. Chen, X.P. Li, G. Ji, Y. Wu, Z. Chen, W. Baekelant, K. Vanmeensel, H. Wang, J.-P. Kruth, Novel Composite Powders with Uniform TiB2 Nano-Particle Distribution for 3D Printing, Applied Sciences 7, 250 (2017), [doi: 10.3390/app7030250, LillOA]
  40. X.P. Li, G. Ji, Z. Chen, A. Addad, Y. Wu, H. Wang, J. Vleugels, J. Van Humbeeck, J.-P. Kruth, Selective laser melting of nano-TiB 2 decorated AlSi10Mg alloy with high fracture strength and ductility, Acta Materialia 129, 183-193 (2017), [doi: 10.1016/j.actamat.2017.02.062, LillOA]
  39. M. Cao, D.-B. Xiong, Z.Q. Tan, G. Ji, B. Amin-Ahmadi, Q. Guo, G. Fan, C. Guo, Z.Q. Li, D. Zhang, Aligning graphene in bulk copper: Nacre-inspired nanolaminated architecture coupled with in-situ processing for enhanced mechanical properties and high electrical conductivity, Carbon 117, 65-74 (2017), [doi: 10.1016/j.carbon.2017.02.089, LillOA]
  38. Z. Chen, G. Sun, Y. Wu, M. Mathon, A. Borbély, D. Chen, G. Ji, M. Wang, S. Zhong, H. Wang, Multi-scale study of microstructure evolution in hot extruded nano-sized TiB2 particle reinforced aluminum composites, Materials & Design 116, 577-590 (2017), [doi: 10.1016/j.matdes.2016.12.070, LillOA]
• 2016
  37. Z.Q. Tan, G. Ji, A. Addad, Z.Q. Li, J.-F. Silvain, D. Zhang, Tailoring interfacial bonding states of highly thermal performance diamond/Al composites: Spark plasma sintering vs. vacuum hot pressing, Composites Part A. Applied Science and Manufacturing 91, 9-19 (2016), [doi: 10.1016/j.compositesa.2016.09.012, LillOA]
  36. L. Yan, Z.Q. Tan, G. Ji, Z.Q. Li, G. Fan, D. Schryvers, A. Shan, D. Zhang, A quantitative method to characterize the Al4C3-formed interfacial reaction: The case study of MWCNT/Al composites, Materials Characterization 112, 213-218 (2016), [doi: 10.1016/j.matchar.2015.12.031, LillOA]
  35. G. Ji, Z.Q. Tan, Y. Lu, D. Schryvers, Z.Q. Li, D. Zhang, Heterogeneous interfacial chemical nature and bonds in a W-coated diamond/Al composite, Materials Characterization 112, 129-133 (2016), [doi: 10.1016/j.matchar.2015.12.013, LillOA]
  34. Z.Q. Tan, Z. Chen, G. Fan, G. Ji, J. Zhang, R. Xu, A. Shan, Z.Q. Li, D. Zhang, Effect of particle size on the thermal and mechanical properties of aluminum composites reinforced with SiC and diamond, Materials & Design 90, 845-851 (2016), [doi: 10.1016/j.matdes.2015.11.028, LillOA]
• 2015
  33. G. Serghiou, G. Ji, N. Odling, H.J. Reichmann, J.-P. Morniroli, R. Boehler, D.J. Frost, J.P. Wright, B. Wunder, Creating Reactivity with Unstable Endmembers using Pressure and Temperature: Synthesis of Bulk Cubic Mg0.4Fe0.6N, Angewandte Chemie International Edition 54, 15109-15112 (2015), [doi: 10.1002/anie.201506257, LillOA]
  32. Z. Chen, J. Li, A. Borbély, G. Ji, S. Zhong, Y. Wu, M. Wang, H. Wang, The effects of nanosized particles on microstructural evolution of an in-situ TiB2/6063Al composite produced by friction stir processing, Materials & Design 88, 999-1007 (2015), [doi: 10.1016/j.matdes.2015.09.127, LillOA]
  31. L. Cheng, G. De Temmerman, P. Zeijlmans Van Emmichoven, G. Ji, H.-B. Zhou, B. Wang, Y. Yuan, Y. Zhang, G.-H. Lu, Effect of neon plasma pre-irradiation on surface morphology and deuterium retention of tungsten, Journal of Nuclear Materials 463, 1025-1028 (2015), [doi: 10.1016/j.jnucmat.2014.11.110, LillOA]
  30. Z. Chen, Z.Q. Tan, G. Ji, G. Fan, D. Schryvers, Q. Ouyang, Z.Q. Li, Effect of Interface Evolution on Thermal Conductivity of Vacuum Hot Pressed SiC/Al Composites, Advanced Engineering Materials 17, 1076-1084 (2015), [doi: 10.1002/adem.201400412, LillOA]
  29. L. Pittarello, G. Ji, A. Yamaguchi, D. Schryvers, V. Debaille, P. Claeys, From olivine to ringwoodite: a TEM study of a complex process, Meteoritics & Planetary Science 50, 944-957 (2015), [doi: 10.1111/maps.12441, LillOA]
  28. Y. Tang, Z. Chen, A. Borbély, G. Ji, S. Zhong, D. Schryvers, V. Ji, H. Wang, Quantitative study of particle size distribution in an in-situ grown Al-TiB2 composite by synchrotron X-ray diffraction and electron microscopy, Materials Characterization 102, 131-136 (2015), [doi: 10.1016/j.matchar.2015.03.003, LillOA]
  27. G. Serghiou, G. Ji, N. Odling, H.J. Reichmann, D.J. Frost, J.P. Wright, Synthesis and high-resolution study distinguishing between very similar interstitial iron nitride structures, High Pressure Research 1-9 (2015), [doi: 10.1080/08957959.2014.996561, LillOA]
  26. C. Zhou, D. Chen, X. Zhang, Z. Chen, S. Zhong, Y. Wu, G. Ji, H. Wang, The roles of geometry and topology structures of graphite fillers on thermal conductivity of the graphite/aluminum composites, Physics Letters A 379, 452-457 (2015), [doi: 10.1016/j.physleta.2014.10.048, LillOA]
  25. C. Zhou, W. Huang, Z. Chen, G. Ji, M. Wang, D. Chen, H. Wang, In-plane thermal enhancement behaviors of Al matrix composites with oriented graphite flake alignment, Composites Part B. Engineering 70, 256-262 (2015), [doi: 10.1016/j.compositesb.2014.11.018, LillOA]
• 2014
  24. C. Zhou, G. Ji, Z. Chen, M. Wang, A. Addad, D. Schryvers, H. Wang, Fabrication, interface characterization and modeling of oriented graphite flakes/Si/Al composites for thermal management applications, Materials & Design 63, 719-728 (2014), [doi: 10.1016/j.matdes.2014.07.009, LillOA]
  23. S. Ma, P. Zhang, G. Ji, Z. Chen, G. Sun, S. Zhong, V. Ji, H. Wang, Microstructure and mechanical properties of friction stir processed Al-Mg-Si alloys dispersion-strengthened by nanosized TiB2 particles, Journal of Alloys and Compounds 616, 128-136 (2014), [doi: 10.1016/j.jallcom.2014.07.092, LillOA]
  22. X.P. Li, J. Wang, M. Yan, G. Ji, G. Schaffer, M. Qian, Formation of anomalously large Al single crystals at triple points during pulsed electric current sintering (PECS) of Al86Ni6Y4.5Co2La1.5 metallic glass, Materials Letters 132, 196-199 (2014), [doi: 10.1016/j.matlet.2014.06.077, LillOA]
  21. G. Serghiou, G. Ji, M. Koch-Müller, N. Odling, H.J. Reichmann, J.P. Wright, P. Johnson, Dense Si(x)Ge(1-x) (0 < x < 1) materials landscape using extreme conditions and precession electron diffraction, Inorganic Chemistry 53;11, (2014), [doi: 10.1021/ic500416s, LillOA]
  20. G. Ji, Z.Q. Tan, R. Shabadi, Z.Q. Li, W. Grünewald, A. Addad, D. Schryvers, D. Zhang, Triple ion beam cutting of diamond/Al composites for interface characterization, Materials Characterization 89, 132-137 (2014), [doi: 10.1016/j.matchar.2014.01.008, LillOA]
  19. Z.Q. Tan, Z.Q. Li, D.-B. Xiong, G. Fan, G. Ji, D. Zhang, A predictive model for interfacial thermal conductance in surface metallized diamond aluminum matrix composites, Materials & Design 55, 257-262 (2014), [doi: 10.1016/j.matdes.2013.09.060, LillOA]
• 2013
  18. F. Housaer, A. Legris, f. béclin, M. Touzin, D. Tingaud, G. Ji, R. Shabadi, Characterization of Al/MWCNTs composites prepared by powder metallurgy routes, MATEC Web of Conferences 7, 1002 (2013), [doi: 10.1051/matecconf/20130701002, LillOA]
  17. J. Zou, C. Buckley, H. Shao, G. Ji, K. Zhang, Light-Metal-Based Nanostructures for Energy and Biomedical Applications, Journal of Nanomaterials 2013, 1-2 (2013), [doi: 10.1155/2013/203542, LillOA]
  16. G. Ji, J.-P. Morniroli, Electron diffraction characterization of a new metastable Al2Cu phase in an Al-Cu friction stir weld, Journal of Applied Crystallography 46, 430-442 (2013), [doi: 10.1107/S0021889813001635, LillOA]
  15. Z. Chen, G. Ji, N. Prud'homme, A. Addad, V. Ji, J. Chevalier, G. Bernard-Granger, Stabilization of the tetragonal phase in large columnar zirconia crystals without incorporating dopants, Scripta Materialia 68, 559-562 (2013), [doi: 10.1016/j.scriptamat.2012.11.028, LillOA]
  14. X.P. Li, M. Yan, G. Ji, M. Qian, Applied Pressure on Altering the Nano-Crystallization Behavior of Al86Ni6Y4.5Co2La1.5 Metallic Glass Powder during Spark Plasma Sintering and Its Effect on Powder Consolidation, Journal of Nanomaterials 2013, 1-6 (2013), [doi: 10.1155/2013/101508, LillOA]
  13. Z.Q. Tan, Z.Q. Li, G. Fan, Q. Guo, X. Kai, G. Ji, L. Zhang, D. Zhang, Enhanced thermal conductivity in diamond/aluminum composites with a tungsten interface nanolayer, Materials & Design 47, 160-166 (2013), [doi: 10.1016/j.matdes.2012.11.061, LillOA]
  12. Z.Q. Tan, Z.Q. Li, G. Fan, X. Kai, G. Ji, L. Zhang, D. Zhang, Fabrication of diamond/aluminum composites by vacuum hot pressing: Process optimization and thermal properties, Composites Part B. Engineering 47, 173-180 (2013), [doi: 10.1016/j.compositesb.2012.11.014, LillOA]
  11. Z.Q. Tan, Z.Q. Li, G. Fan, X. Kai, G. Ji, L. Zhang, D. Zhang, Diamond/aluminum composites processed by vacuum hot pressing: Microstructure characteristics and thermal properties, Diamond and Related Materials 31, 1-5 (2013), [doi: 10.1016/j.diamond.2012.10.008, LillOA]
  10. G. Ji, F. Bernard, S. Launois, T. Grosdidier, Processing conditions, microstructure and mechanical properties of hetero-nanostructured ODS FeAl alloys produced by spark plasma sintering, Materials Science and Engineering A 559, 566-573 (2013), [doi: 10.1016/j.msea.2012.08.142, LillOA]
• 2012
  9. J.-P. Morniroli, G. Ji, D. Jacob, A systematic method to identify the space group from PED and CBED patterns part I - theory, Ultramicroscopy 121, 42-60 (2012), [doi: 10.1016/j.ultramic.2012.04.008, LillOA]
  8. D. Jacob, G. Ji, J.-P. Morniroli, A systematic method to identify the space group from PED and CBED patterns part II - practical examples, Ultramicroscopy 121, 61-71 (2012), [doi: 10.1016/j.ultramic.2012.04.015, LillOA]
  7. J. Zou, H. Sun, X. Zeng, G. Ji, W. Ding, Preparation and Hydrogen Storage Properties of Mg-Rich Mg-Ni Ultrafine Particles, Journal of Nanomaterials 2012, 1-8 (2012), [doi: 10.1155/2012/592147, LillOA]
  6. M.-N. Avettand-Fènoël, R. Taillard, G. Ji, D. Goran, Multiscale Study of Interfacial Intermetallic Compounds in a Dissimilar Al 6082-T6/Cu Friction-Stir Weld, Metallurgical and Materials Transactions A 43, 4655-4666 (2012), [doi: 10.1007/s11661-012-1277-3, LillOA]
  5. M.-N. Avettand-Fènoël, R. Taillard, G. Ji, Quality of Interfaces in Cu/Al Dissimilar Friction-Stirred Welds, Materials Science Forum 706-709, 959-964 (2012), [doi: 10.4028/www.scientific.net/MSF.706-709.959, LillOA]
• 2011
  4. G. Ji, D. Jacob, J.-P. Morniroli, The state of order in Fe-Al studied by precession electron diffraction, Philosophical Magazine Letters 91, 57-63 (2011), [doi: 10.1080/09500839.2010.524898, LillOA]
  3. D. Goran, G. Ji, M.-N. Avettand-Fènoël, R. Taillard, Texture and Microstructure Evolution in Friction Stir Welded Cu-Al Sheets Characterized by EBSD, Materials Science Forum 702-703, 574-577 (2011), [doi: 10.4028/www.scientific.net/MSF.702-703.574, LillOA]
• 2010
  2. T. Grosdidier, D. Goran, G. Ji, N. Llorca, On the processing of hetero-nanostructured metals for improved strength/ductility balance by ECAE and SPS techniques, Journal of Alloys and Compounds 504S, S456-S459 (2010), [doi: 10.1016/j.jallcom.2010.03.035, LillOA]
  1. J.-P. Morniroli, P. Stadelmann, G. Ji, S. Nicolopoulos, The symmetry of precession electron diffraction patterns, Journal of Microscopy 237, 511-515 (2010), [doi: 10.1111/j.1365-2818.2009.03311.x, LillOA]