UMET - Liste des publications de Serge BOURBIGOT

Chapitres d'ouvrage

4. S. Bourbigot, J. Lu, T. Zhang, X. Zhang, Y. Liu, Y.-J. Xu, J. Li, Y. Xia, Plant-derived Fire Retardants, in Green Fire Retardants for Polymeric Materials, Royal Society of Chemistry pp. 4-71 (2023) [doi: 10.1039/bk9781839169793-00004, LillOA]
3. S. Bourbigot, Evaluation of condensed phase: Char/residue analysis, in Analysis of Flame Retardancy in Polymer Science, Elsevier pp. 191-231 (2022) [doi: 10.1016/b978-0-12-824045-8.00006-x, LillOA]
2. S. Bourbigot, Intumescence‐Based Flame Retardant, in Non halogenated flame retardant handbook, Wiley pp. 169-238 (2021) [doi: 10.1002/9781119752240.ch4, LillOA]
1. B. Gardelle, S. Duquesne, P. Vandereecken, S. Bourbigot, Fire Performance of Curable Silicone-Based Coatings, in Fire and Polymers VI: New Advances in Flame Retardant Chemistry and Science [A.B. Morgan, C.A. Wilkie, G.L. Nelson (eds)], American Chemical Society pp. 205-221 (2012) [LillOA]

Publications dans des revues internationales

• 2024
  221. Q. Yang, C. Davy, J. Sarazin, S. Bourbigot, G. Fontaine, Effect of the Al/Si ratio on intumescent Na-based geopolymer, Fire Safety Journal 148, 104220 (2024), [doi: 10.1016/j.firesaf.2024.104220, LillOA]
  220. A. Amokrane, M. Fleurotte, A. Hodroj, O. Authier, G. Debenest, G. Fontaine, S. Bourbigot, Influence of parameter variation intervals on pyrolysis sensitivity analysis for charring and non-charring materials, Journal of Fire Sciences 42;5, 363-404 (2024), [doi: 10.1177/07349041241248080, LillOA]
  219. B. Miranda Campos, J. Beauvois, G. Fontaine, S. Bourbigot, G. Stoclet, F. Bonnet, One step production from the monomer of poly(L-lactide)/flax biocomposites by thermoplastic resin transfer molding: mechanical properties and aging., Polymer Composites (2024), [doi: 10.1002/pc.28710, LillOA]
  218. M. Caron, K. Ben Tayeb Meziane, S. Bourbigot, G. Fontaine, Re-examination of the intumescence mechanism of ammonium polyphosphate/pentaerythritol/zeolite 4A fire-retarded formulation using advanced spectroscopic techniques, Journal of Fire Sciences -, - (2024), [doi: 10.1177/07349041241245697, LillOA]
  217. D. Roncucci, M.-O. Auge, S. Dul, J. Chen, A. Gooneie, D. Rentsch, S. Lehner, M. Jovic, A. Rippl, V. Ayala, F. Bonnet, S. Bourbigot, H. Grützmacher, G. Fontaine, S. Gaan, Coumarin-DPPO a new bio-based phosphorus additive for poly(lactic acid): Processing and flame retardant application, Polymer Degradation and Stability 110737 (2024), [doi: 10.1016/j.polymdegradstab.2024.110737, LillOA]
  216. A. Lamandé, V. Marchetti, S. Bourbigot, G. Fontaine, Effects of Oxygen Concentration on the Reaction to Fire of Cross-Laminated Timber in a Controlled-Atmosphere Cone Calorimeter, Fire Technology (2024), [doi: 10.1007/s10694-023-01518-0, LillOA]
• 2023
  215. A. Coimbra, J. Sarazin, S. Bourbigot, G. Legros, J.-L. Consalvi, A pyrolysis model for the thermal decomposition of low-density polyethylene blended with ammonium polyphosphate and pentaerythritol, Fire Safety Journal 139, 103813 (2023), [doi: 10.1016/j.firesaf.2023.103813, LillOA]
  214. Y. Li, A. Guibaud, J.-M. Citerne, J.-L. Consalvi, A. Coimbra, J. Sarazin, S. Bourbigot, J. Torero, G. Legros, Effects of flame retardants on extinction limits, spread rate, and smoke release in opposed-flow flame spread over thin cylindrical polyethylene samples in microgravity, Proceedings of the Combustion Institute 39;3, 3919-3928 (2023), [doi: 10.1016/j.proci.2022.08.030, LillOA]
  213. M. Thys, G.E. Kaya, L. Soetemans, G. Van Assche, S. Bourbigot, B. Baytekin, R. Vendamme, N. Van den Brande, Bioaromatic-Associated Multifunctionality in Lignin-Containing Reversible Elastomers, ACS Applied Polymer Materials 5;8, 5846-5856 (2023), [doi: 10.1021/acsapm.3c00491, LillOA]
  212. J. Lu, X. Sun, G. Fontaine, S. Bourbigot, Z. Chen, M. Wang, P. Jiang, Combustion behavior, mechanical performance and application for vinyl acetate–ethylene copolymer emulsion containing melamine amino trimethyl phosphate and sodium lignosulfonate, Journal of Applied Polymer Science 141;2, (2023), [doi: 10.1002/app.54779, LillOA]
  211. M. Fleurotte, G. Debenest, O. Authier, G. Fontaine, S. Bourbigot, A. Amokrane, Modelling of the swelling behaviour of a fire retarded material under a cone calorimeter, Journal of Fire Sciences 073490412311771 (2023), [doi: 10.1177/07349041231177183, LillOA]
  210. Y. Xu, C. Yan, C. Du, K. Xu, Y. Li, M. Xu, S. Bourbigot, G. Fontaine, B. Li, L. Liu, High-strength, thermal-insulating, fire-safe bio-based organic lightweight aerogel based on 3D network construction of natural tubular fibers, Composites Part B: Engineering 261, 110809 (2023), [doi: 10.1016/j.compositesb.2023.110809, LillOA]
  209. F. Xiao, G. Fontaine, K. Li, S. Bourbigot, Solid‐state NMR characterization of multi‐component intumescent flame retardant polybutylene succinate formulations, Polymers for Advanced Technologies 34;3, 973-984 (2023), [doi: 10.1002/pat.5945, LillOA]
  208. A. Gallos, O. Lannoy, S. Bellayer, G. Fontaine, S. Bourbigot, F. Allais, Fire testing and mechanical properties of neat and elastomeric polylactic acid composites reinforced with raw and enzymatically treated hemp fibers, Green chemistry letters and reviews 16;1, (2023), [doi: 10.1080/17518253.2022.2164472, LillOA]
  207. T. Nazé, F. Poutch, F. Bonnet, M. Jimenez, S. Bourbigot, T. Nazé, Impact of additive manufacturing on reaction to fire, Journal of Fire Sciences 41;3, (2023), [doi: 10.1177/07349041231158990, LillOA]
  206. M.-O. Auge, D. Roncucci, S. Bourbigot, F. Bonnet, S. Gaan, G. Fontaine, Recent advances on reactive extrusion of Poly(lactic acid), European Polymer Journal 184, 111727 (2023), [doi: 10.1016/j.eurpolymj.2022.111727, LillOA]
• 2022
  205. A. Coimbra, J. Sarazin, S. Bourbigot, G. Legros, J.-L. Consalvi, A semi-global reaction mechanism for the thermal decomposition of low-density polyethylene blended with ammonium polyphosphate and pentaerythritol, Fire Safety Journal 133, 103649 (2022), [doi: 10.1016/j.firesaf.2022.103649, LillOA]
  204. F. Xiao, G. Fontaine, K. Li, S. Bourbigot, Combination effect of zinc borate in intumescent polybutylene succinate systems: Study of the carbonaceous structures using solid-state NMR, Polymer Degradation and Stability 110192 (2022), [doi: 10.1016/j.polymdegradstab.2022.110192, LillOA]
  203. M. Fleurotte, O. Authier, S. Bourbigot, G. Fontaine, G. Debenest, A. Amokrane, Sensitivity analysis applied to the pyrolysis of charring and non-charring materials under a cone calorimeter, Journal of Fire Sciences 40;6, 405-443 (2022), [doi: 10.1177/07349041221134486, LillOA]
  202. B. Campos, G. Fontaine, S. Bourbigot, G. Stoclet, F. Bonnet, Poly(L-lactide-co-ε-caprolactone)-matrix composites produced in one step by in situ polymerization in TP-RTM, ACS Applied Polymer Materials (2022), [doi: 10.1021/acsapm.2c01056, LillOA]
  201. G. Fontaine, V. Marchetti, S. Bourbigot, Effects of accelerated and natural weathering on fire-retarded industrial wood composite, Journal of Fire Sciences 1-18 (2022), [doi: 10.1177/07349041221102059, LillOA]
  200. J. Feng, Z. Ma, Z. Xu, H. Xie, Y. Lu, C. Maluk, P. Song, S. Bourbigot, H. Wang, A Si-containing polyphosphoramide via green chemistry for fire-retardant polylactide with well-preserved mechanical and transparent properties, Chemical Engineering Journal 431;3, 134259 (2022), [doi: 10.1016/j.cej.2021.134259, LillOA]
  199. X. Wu, S. Bourbigot, K. Li, Y. Zou, Co-pyrolysis characteristics and flammability of polylactic acid and acrylonitrile-butadiene-styrene plastic blend using TG, temperature-dependent FTIR, Py-GC/MS and cone calorimeter analyses, Fire Safety Journal 103543 (2022), [doi: 10.1016/j.firesaf.2022.103543, LillOA]
  198. X. Wang, Y. Li, D. Meng, X. Gu, J. Sun, Y. Hu, S. Bourbigot, S. Zhang, A Review on Flame-Retardant Polyvinyl Alcohol: Additives and Technologies, Polymer Reviews 1-41 (2022), [doi: 10.1080/15583724.2022.2076694, LillOA]
  197. J. Lu, L. Li, P. Jiang, Z. Chen, G. Fontaine, Y. Zhang, G. Yu, S. Bourbigot, Flammability properties of intumescent vinyl acetate–ethylene copolymer emulsion including natural carbonization agent, Polymer 245, 124709 (2022), [doi: 10.1016/j.polymer.2022.124709, LillOA]
  196. F. Xiao, G. Fontaine, S. Bourbigot, Improvement of Flame Retardancy and Antidripping Properties of Intumescent Polybutylene Succinate Combining Piperazine Pyrophosphate and Zinc Borate, ACS Applied Polymer Materials 4;3, 1911-1921 (2022), [doi: 10.1021/acsapm.1c01755, LillOA]
  195. F. Xiao, G. Fontaine, S. Bourbigot, A highly efficient intumescent polybutylene succinate: Flame retardancy and mechanistic aspects, Polymer Degradation and Stability 196, 109830 (2022), [doi: 10.1016/j.polymdegradstab.2022.109830, LillOA]
  194. S. Chatenet, O. Authier, S. Bourbigot, G. Fontaine, Reaction to fire of polymethylmethacrylate and polyvinylchloride under reduced oxygen concentrations in a controlled-atmospherecone calorimeter, Journal of Fire Sciences 1-19 (2022), [doi: 10.1177/07349041221092968, LillOA]
  193. B. Campos, G. Fontaine, S. Bourbigot, F. Bonnet, Thermoplastic matrix-based composites produced by resin transfer molding: A review, Polymer Composites 43, 2485-2506 (2022), [doi: 10.1002/pc.26575, LillOA]
  192. A. Lucherini, H.Y. Lam, M. Jimenez, F. Samyn, S. Bourbigot, C. Maluk, C. Maluk, Fire Testing of Intumescent Coatings: Comparison Between Bench-Scale Furnace and Radiant Panels Experimental Methodologies, Fire Technology (2022), [doi: 10.1007/s10694-022-01216-3, LillOA]
  191. J. Lu, Y. Huang, P. Jiang, Z. Chen, S. Bourbigot, G. Fontaine, L. Chang, L. Zhang, F. Pan, Universal circulating impregnation method for the fabrication of durable flame-retardant plywood with low hygroscopicity and leaching resistance, Polymer Degradation and Stability 195, 109799 (2022), [doi: 10.1016/j.polymdegradstab.2021.109799, LillOA]
  190. X. Jin, S. Cui, S. Sun, J. Sun, S. Zhang, W. Tang, S. Bourbigot, The preparation of polyamide 11 composites with extremely long ignition time, Polymers for Advanced Technologies (2022), [doi: 10.1002/pat.5593, LillOA]
  189. Q. Lin, P. Jiang, S. Ren, S. Liu, Y. Ji, Y. Huang, W. Yu, G. Fontaine, S. Bourbigot, Advanced functional materials based on bamboo cellulose fibers with different crystal structures, Composites Part A: Applied Science and Manufacturing 154, 106758 (2022), [doi: 10.1016/j.compositesa.2021.106758, LillOA]
  188. S.M. Seraji, P. Song, R.J. Varley, S. Bourbigot, D. Voice, H. Wang, Fire-retardant unsaturated polyester thermosets: The state-of-the-art, challenges and opportunities, Chemical Engineering Journal 430;Part 2, 132785 (2022), [doi: 10.1016/j.cej.2021.132785, LillOA]
• 2021
  187. L. Geoffroy, F. Samyn, M. Jimenez, S. Bourbigot, An efficient bi-layer intumescent paint metal laminate fire barrier for various substrates: Extension to other application, European Journal of Materials 1;1, 19-33 (2021), [doi: 10.1080/26889277.2021.1972770, LillOA]
  186. S. Bourbigot, J. Sarazin, C.A. Davy, G. Fontaine, Foamed geopolymers for fire protection: Burn‐through testing and modeling, FIRE AND MATERIALS (2021), [doi: 10.1002/fam.3048, LillOA]
  185. F. Samyn, R. Adanmenou, S. Bourbigot, S. Duquesne, M. Jimenez, M. Van Marle, S. Weij, Flame Retardancy of Lightweight Sandwich Composites, Journal of Composites Science 5;10, 274 (2021), [doi: 10.3390/jcs5100274, LillOA]
  184. Y. Xue, J. Feng, Z. Ma, L. Liu, Y. Zhang, J. Dai, Z. Xu, S. Bourbigot, H. Wang, P. Song, Advances and challenges in eco-benign fire-retardant polylactide, Materials Today Physics 21, 100568 (2021), [doi: 10.1016/j.mtphys.2021.100568, LillOA]
  183. Y. Zou, Y. Li, S. Bourbigot, J. Zhang, Y. Guo, K. Li, X. He, J. Baolati, Determination of solid-phase reaction mechanism and chlorine migration behavior of co-pyrolyzing PVC CaCO3 based polymer using temperature-dependent FTIR and XRD analysis, Polymer Degradation and Stability 193, 109741 (2021), [doi: 10.1016/j.polymdegradstab.2021.109741, LillOA]
  182. J. Lu, D. Wang, P. Jiang, S. Zhang, Z. Chen, S. Bourbigot, G. Fontaine, M. Wei, Design of fire resistant, sound-absorbing and thermal-insulated expandable polystyrene based lightweight particleboard composites, Construction and Building Materials 305, 124773 (2021), [doi: 10.1016/j.conbuildmat.2021.124773, LillOA]
  181. F. Xiao, G. Fontaine, S. Bourbigot, Intumescent polybutylene succinate: Ethylenediamine phosphate and synergists, Polymer Degradation and Stability Volume 192, 109707 (2021), [doi: 10.1016/j.polymdegradstab.2021.109707, LillOA]
  180. J. Sarazin, E. Franchini, V. Dréan, R. Chiva, S. Bourbigot, Jetfire lab: Jetfire at reduced scale, Journal of Fire Sciences 073490412110371 (2021), [doi: 10.1177/07349041211037192, LillOA]
  179. J. Sarazin, C. Davy, S. Bourbigot, G. Tricot, J. Hosdez, D. Lambertin, G. Fontaine, Flame resistance of geopolymer foam coatings for the fire protection of steel, Composites Part B: Engineering 222, 109045 (2021), [doi: 10.1016/j.compositesb.2021.109045, LillOA]
  178. Y. Xue, Z. Ma, X. Xu, M. Shen, G. Huang, S. Bourbigot, X. Liu, P. Song, Mechanically robust and flame-retardant polylactide composites based on molecularly-engineered polyphosphoramides, Composites Part A: Applied Science and Manufacturing 144, 106317 (2021), [doi: 10.1016/j.compositesa.2021.106317, LillOA]
  177. A.-L. Davesne, M. Jimenez, F. Samyn, S. Bourbigot, Thin coatings for fire protection: An overview of the existing strategies, with an emphasis on layer-by-layer surface treatments and promising new solutions, Progress in Organic Coatings 154, 106217 (2021), [doi: 10.1016/j.porgcoat.2021.106217, LillOA]
  176. F. Xiao, G. Fontaine, S. Bourbigot, Recent developments in fire retardancy of polybutylene succinate, Polymer Degradation and Stability 183, 109466 (2021), [doi: 10.1016/j.polymdegradstab.2020.109466, LillOA]
• 2020
  175. T. Bensabath, J. Sarazin, S. Bourbigot, Anisotropy of expandable graphite to explain its behavior as a flame-retardant, Journal of Fire Sciences 39;2, 109-118 (2020), [doi: 10.1177/0734904120969639, LillOA]
  174. K. Li, Y. Zou, S. Bourbigot, J. Ji, X. Chen, Pressure effects on morphology of isotropic char layer, shrinkage, cracking and reduced heat transfer of wooden material, Proceedings of the Combustion Institute (2020), [doi: 10.1016/j.proci.2020.07.072, LillOA]
  173. L. Geoffroy, A.-L. Davesne, F. Parent, F. Sanchette, F. Solarski, M. Jimenez, S. Bourbigot, Combining Low-Emissivity Thin Coating and 3D-Printed Original Designs for Superior Fire-Protective Performance, ACS Omega 5;43, 27857–27863 (2020), [doi: 10.1021/acsomega.0c02902, LillOA]
  172. A. Ramgobin, G. Fontaine, S. Bourbigot, A Case Study of Polyether Ether Ketone (I): Investigating the Thermal and Fire Behavior of a High-Performance Material, Polymers 12;8, 1789 (2020), [doi: 10.3390/polym12081789, LillOA]
  171. A. Ramgobin, G. Fontaine, S. Bourbigot, Oxygen concentration and modeling thermal decomposition of a high‐performance material: A case study of polyimide (Cirlex), Polymers for Advanced Technologies (2020), [doi: 10.1002/pat.5060, LillOA]
  170. W. Tang, Z. Qin, F. Liu, S. Gong, C. Peng, X. Gu, S. Zhang, X. Wang, X. Jin, S. Bourbigot, Influence of two kinds of low dimensional nano-sized silicate clay on the flame retardancy of polypropylene, Materials Chemistry and Physics 256, 123743 (2020), [doi: 10.1016/j.matchemphys.2020.123743, LillOA]
  169. S. Bourbigot, J. Sarazin, T. Bensabath, Intumescent polypropylene in extreme fire conditions, Fire Safety Journal 103082 (2020), [doi: 10.1016/j.firesaf.2020.103082, LillOA]
  168. L. Geoffroy, A.-L. Davesne, S. Bellayer, F. Blanchard, E. Richard, F. Samyn, M. Jimenez, S. Bourbigot, 3D printed sandwich materials filled with hydrogels for extremely low heat release rate, Polymer Degradation and Stability 179, 109269 (2020), [doi: 10.1016/j.polymdegradstab.2020.109269, LillOA]
  167. A. Ramgobin, G. Fontaine, S. Bourbigot, A Case Study of Polyetheretherketone (II): Playing with Oxygen Concentration and Modeling Thermal Decomposition of a High-Performance Material, Polymers 12;7, 1577 (2020), [doi: 10.3390/polym12071577, LillOA]
  166. S. Bellayer, M. Jimenez, S. Barrau, A. Marin, J. Sarazin, S. Bourbigot, Formulation of eco-friendly sol–gel coatings to flame-retard flexible polyurethane foam, Green materials 1-11 (2020), [doi: 10.1680/jgrma.19.00059, LillOA]
  165. L. Geoffroy, F. Samyn, M. Jimenez, S. Bourbigot, Bilayer Intumescent Paint Metal Laminates: A Novel Design for a High-Performance Fire Barrier, Industrial & Engineering Chemistry Research 59;7, 2988-2997 (2020), [doi: 10.1021/acs.iecr.9b06345, LillOA]
  164. X. Liu, X. Meng, J. Sun, W. Tang, S. Chen, X. Peng, X. Gu, B. Fei, S. Bourbigot, S. Zhang, Improving the flame retardant properties of polyester-cotton blend fabrics by introducing an intumescent coating via layer by layer assembly, Journal of Applied Polymer Science 49253 (2020), [doi: 10.1002/app.49253, LillOA]
  163. Q. Sun, Y. Ding, S.I. Stoliarov, J. Sun, G. Fontaine, S. Bourbigot, Development of a pyrolysis model for an intumescent flame retardant system: Poly(lactic acid) blended with melamine and ammonium polyphosphate, Composites Part B: Engineering 108055 (2020), [doi: 10.1016/j.compositesb.2020.108055, LillOA]
  162. H. Yang, B. Yu, X. Xu, S. Bourbigot, H. Wang, P. Song, Lignin-derived bio-based flame retardants toward high-performance sustainable polymeric materials, Green Chemistry 22;7, 2129-2161 (2020), [doi: 10.1039/d0gc00449a, LillOA]
  161. X. Wang, S. Wang, W. Wang, H. Li, X. Liu, X. Gu, S. Bourbigot, Z. Wang, J. Sun, S. Zhang, The flammability and mechanical properties of poly (lactic acid) composites containing Ni-MOF nanosheets with polyhydroxy groups, Composites Part B: Engineering 107568 (2020), [doi: 10.1016/j.compositesb.2019.107568, LillOA]
• 2019
  160. F. Rault, E. Pleyber, C. Campagne, M. Rochery, S. Giraud, S. Bourbigot, E. Devaux, Effect of manganese nanoparticles on the mechanical, thermal and fire properties of polypropylene multifilament yarn, Polymer Degradation and Stability 94, 955-964 (2019), [doi: 10.1016/j.polymdegradstab.2009.03.012, LillOA]
  159. L. Geoffroy, F. Samyn, M. Jimenez, S. Bourbigot, Innovative 3D printed design to conceive highly fire-retardant multi-material, Polymer Degradation and Stability 169, 108992 (2019), [doi: 10.1016/j.polymdegradstab.2019.108992, LillOA]
  158. C. Hu, S. Bourbigot, T. Delaunay, M. Collinet, S. Marcille, G. Fontaine, Poly(isosorbide carbonate): A ‘green’ char forming agent in polybutylene succinate intumescent formulation, Composites Part B: Engineering 184, 107675 (2019), [doi: 10.1016/j.compositesb.2019.107675, LillOA]
  157. T. Bensabath, J. Sarazin, M. Jimenez, F. Samyn, S. Bourbigot, Intumescent polypropylene: Interactions between physical and chemical expansion, Fire and Materials (2019), [doi: 10.1002/fam.2790, LillOA]
  156. K. Decsov, K. Bocz, B. Szolnoki, S. Bourbigot, G. Fontaine, D. Vadas, G. Marosi, Development of Bioepoxy Resin Microencapsulated Ammonium-Polyphosphate for Flame Retardancy of Polylactic Acid, Molecules 24;22, 4123 (2019), [doi: 10.3390/molecules24224123, LillOA]
  155. A.-L. Davesne, S. Lazar, S. Bellayer, S. Qin, J.C. Grunlan, S. Bourbigot, M. Jimenez, Hexagonal Boron Nitride Platelet-Based Nanocoating for Fire Protection, ACS Applied Nano Materials 2;9, 5450-5459 (2019), [doi: 10.1021/acsanm.9b01055, LillOA]
  154. T. NYAZIKA, M. Jimenez, F. Solarski, S. Bourbigot, Pyrolysis modeling, sensitivity analysis, and optimization techniques for combustible materials: A review, Journal of Fire Sciences 37;4-6, 377-433 (2019), [doi: 10.1177/0734904119852740, LillOA]
  153. X. Wang, J. Sun, X. Liu, S. Jiang, J. Wang, H. Li, S. Bourbigot, X. Gu, S. Zhang, An effective flame retardant containing hypophosphorous acid for poly (lactic acid): Fire performance, thermal stability and mechanical properties, Polymer Testing (2019), [doi: 10.1016/j.polymertesting.2019.105940, LillOA]
  152. S. Zhang, W. Tang, L. Li, H. Li, J. Sun, X. Gu, S. Chen, X. Peng, S. Bourbigot, Fabrication of Fly Ash-Based Mesoporous Aluminosilicate Oxides Loaded with Zinc and its Synergistic Fire Resistancy in Polypropylene, Journal of Vinyl and Additive Technology (2019), [doi: 10.1002/vnl.21726, LillOA]
  151. X. Jin, S. Cui, S. Sun, X. Gu, H. Li, X. Liu, W. Tang, J. Sun, S. Bourbigot, S. Zhang, The preparation of a bio-polyelectrolytes based core-shell structure and its application in flame retardant polylactic acid composites, Composites Part A: Applied Science and Manufacturing 105485 (2019), [doi: 10.1016/j.compositesa.2019.105485, LillOA]
  150. C. Hu, S. Bourbigot, T. Delaunay, M. Collinet, S. Marcille, G. Fontaine, Synthesis of isosorbide based flame retardants: Application for polybutylene succinate, Polymer Degradation and Stability 9-17 (2019), [doi: 10.1016/j.polymdegradstab.2019.03.016, LillOA]
  149. X. Jin, S. Cui, S. Sun, Y. Tian, F. Lv, X. Gu, H. Li, J. Sun, S. Zhang, S. Bourbigot, A new approach on improving the fire resistance of polyamide 11 by incorporating sulfur‐based flame retardant, Polymers for Advanced Technologies (2019), [doi: 10.1002/pat.4591, LillOA]
  148. M. Decostanzi, R. Tavernier, G. Fontaine, S. Bourbigot, C. Negrell, S. Caillol, Eugenol-based thermally stable thermosets by Alder-ene reaction: From synthesis to thermal degradation, European Polymer Journal 337-346 (2019), [doi: 10.1016/j.eurpolymj.2019.05.018, LillOA]
  147. L. Geoffroy, F. Samyn, M. Jimenez, S. Bourbigot, Additive manufacturing of fire‐retardant ethylene‐vinyl acetate, Polymers for Advanced Technologies (2019), [doi: 10.1002/pat.4620, LillOA]
  146. P. Jiang, S. Zhang, S. Bourbigot, Z. Chen, S. Duquesne, M. Casetta, Surface grafting of sepiolite with a phosphaphenanthrene derivative and its flame-retardant mechanism on PLA nanocomposites, Polymer Degradation and Stability 68-79 (2019), [doi: 10.1016/j.polymdegradstab.2019.04.012, LillOA]
  145. G. Okyay, F. Solarski, M. Jimenez, S. Bourbigot, A Facile Technique to Extract the Cross-Sectional Structure of Brittle Porous Chars from Intumescent Coatings, Polymers 11;4, 640 (2019), [doi: 10.3390/polym11040640, LillOA]
  144. A. Ramgobin, G. Fontaine, S. Bourbigot, Thermal Degradation and Fire Behavior of High Performance Polymers, Polymer Reviews 59, 55-123 (2019), [doi: 10.1080/15583724.2018.1546736, LillOA]
  143. S. Bourbigot, J. Sarazin, T. Bensabath, F. Samyn, M. Jimenez, Intumescent polypropylene: Reaction to fire and mechanistic aspects, Fire Safety Journal 105, 261-269 (2019), [doi: 10.1016/j.firesaf.2019.03.007, LillOA]
  142. E. Louisy, F. Samyn, S. Bourbigot, G. Fontaine, F. Bonnet, Preparation of Glass Fabric/Poly(L-lactide) Composites by Thermoplastic Resin Transfer Molding, Polymers 11;2, 339 (2019), [doi: 10.3390/polym11020339, LillOA]
  141. G. Okyay, A.D. Naik, F. Samyn, M. Jimenez, S. Bourbigot, Fractal conceptualization of intumescent fire barriers, toward simulations of virtual morphologies, Scientific Reports 9, 1872 (2019), [doi: 10.1038/s41598-019-38515-9, LillOA]
  140. S. Bourbigot, J. Sarazin, F. Samyn, M. Jimenez, Intumescent ethylene-vinyl acetate copolymer: Reaction to fire and mechanistic aspects, Polymer Degradation and Stability 161, 235-244 (2019), [doi: 10.1016/j.polymdegradstab.2019.01.029, LillOA]
• 2018
  139. N. Hansupo, G. Tricot, S. Bellayer, P. Roussel, F. Samyn, S. Duquesne, M. Jimenez, M. Hollman, P. Catala, S. Bourbigot, Getting a better insight into the chemistry of decomposition of complex flame retarded formulation: New insights using solid state NMR, Polymer Degradation and Stability 153, 145-154 (2018), [doi: 10.1016/j.polymdegradstab.2018.04.028, LillOA]
  138. C.I. Idumah, A. Hassan, S. Bourbigot, Synergistic effect of exfoliated graphene nanoplatelets and non-halogen flame retardants on flame retardancy and thermal properties of kenaf flour-PP nanocomposites, Journal of Thermal Analysis and Calorimetry 134, 1681-1703 (2018), [doi: 10.1007/s10973-018-7833-3, LillOA]
  137. C. Hu, G. Fontaine, P. TRANCHARD, T. Delaunay, M. Collinet, S. Marcille, S. Bourbigot, In-situ investigation of temperature evolution of drippings via an optimized UL-94 instrumentation: Application to flame retarded polybutylene succinate, Polymer Degradation and Stability 155, 145-152 (2018), [doi: 10.1016/j.polymdegradstab.2018.07.015, LillOA]
  136. S. Lazar, F. Carosio, A.-L. Davesne, M. Jimenez, S. Bourbigot, J.C. Grunlan, Extreme Heat Shielding of Clay/Chitosan Nanobrick Wall on Flexible Foam, ACS Applied Materials & Interfaces 10, 31686–31696 (2018), [doi: 10.1021/acsami.8b10227, LillOA]
  135. C. Delgado-Sánchez, J. Sarazin, F. Santiago-Medina, V. Fierro, A. Pizzi, S. Bourbigot, A. Celzard, Impact of the formulation of biosourced phenolic foams on their fire properties, Polymer Degradation and Stability 153, 1-14 (2018), [doi: 10.1016/j.polymdegradstab.2018.04.006, LillOA]
  134. D. Vadas, T. Igricz, J. Sarazin, S. Bourbigot, G. Marosi, K. Bocz, Flame retardancy of microcellular poly(lactic acid) foams prepared by supercritical CO 2 -assisted extrusion, Polymer Degradation and Stability 153, 100-108 (2018), [doi: 10.1016/j.polymdegradstab.2018.04.021, LillOA]
  133. L. Murer, S. Chatenet, G. Fontaine, S. Bourbigot, O. Authier, Influence of model assumptions on charring polymer decomposition in the cone calorimeter, Journal of Fire Sciences 73490411876164 (2018), [doi: 10.1177/0734904118761641, LillOA]
  132. M. Casetta, G. Michaux, B. Ohl, S. Duquesne, S. Bourbigot, Key role of magnesium hydroxide surface treatment in the flame retardancy of glass fiber reinforced polyamide 6, Polymer Degradation and Stability 148, 95-103 (2018), [doi: 10.1016/j.polymdegradstab.2018.01.007, LillOA]
  131. S. Bellayer, M. Jimenez, B. Prieur, B. Dewailly, A. Ramgobin, J. Sarazin, B. Revel, G. Tricot, S. Bourbigot, Fire retardant sol-gel coated polyurethane foam: Mechanism of action, Polymer Degradation and Stability 147, 159-167 (2018), [doi: 10.1016/j.polymdegradstab.2017.12.005, LillOA]
  130. A.D. Naik, S. Bourbigot, S. Bellayer, N. Touati, K. Ben Tayeb Meziane, H. Vezin, G. Fontaine, Salen Complexes as Fire Protective Agents for Thermoplastic Polyurethane: Deep Electron Paramagnetic Resonance Spectroscopy Investigation, ACS Applied Materials & Interfaces 10;29, 24860-24875 (2018), [doi: 10.1021/acsami.8b07323, LillOA]
  129. G. Okyay, S. Bellayer, F. Solarski, M. Jimenez, S. Bourbigot, Characterization of in-flame soot from balsa composite combustion during mass loss cone calorimeter tests, Polymer Degradation and Stability 154, 304-311 (2018), [doi: 10.1016/j.polymdegradstab.2018.06.013, LillOA]
  128. L. Geoffroy, F. Solarski, M. Jimenez, S. Bourbigot, Intumescent Polymer Metal Laminates for Fire Protection, Polymers 10;9, 995 (2018), [doi: 10.3390/polym10090995, LillOA]
• 2017
  127. X. Jin, X. Gu, C. Chen, W. Tang, H. Li, X. Liu, S. Bourbigot, Z. Zhang, J. Sun, S. Zhang, The fire performance of polylactic acid containing a novel intumescent flame retardant and intercalated layered double hydroxides, Journal of Materials Science 52, 12235-12250 (2017), [doi: 10.1007/s10853-017-1354-5, LillOA]
  126. X. Jin, J. Sun, J.S. Zhang, X. Gu, S. Bourbigot, H. Li, W. Tang, S. Zhang, Preparation of a Novel Intumescent Flame Retardant Based on Supramolecular Interactions and Its Application in Polyamide 11, ACS Applied Materials & Interfaces 9, 24964-24975 (2017), [doi: 10.1021/acsami.7b06250, LillOA]
  125. A. Ramgobin, G. Fontaine, C. Penverne, S. Bourbigot, Thermal Stability and Fire Properties of Salen and Metallosalens as Fire Retardants in Thermoplastic Polyurethane (TPU), Materials 10, 665 (2017), [doi: 10.3390/ma10060665, LillOA]
  124. P. TRANCHARD, S. Duquesne, F. Solarski, B. Estebe, S. Bourbigot, Kinetic analysis of the thermal decomposition of a carbon fibre-reinforced epoxy resin laminate, Journal of Analytical and Applied Pyrolysis Volume 126, 14-21 (2017), [doi: 10.1016/j.jaap.2017.07.002, LillOA]
  123. B. Prieur, M. Meub, M. Wittemann, R. Klein, S. Bellayer, G. Fontaine, S. Bourbigot, Phosphorylation of lignin: characterization and investigation of the thermal decomposition, RSC Adv. 7, 16866-16877 (2017), [doi: 10.1039/C7RA00295E, LillOA]
  122. J. Sarazin, P. Bachelet, S. Bourbigot, Fire behavior of simulated low voltage intumescent cables with and without electric current, Journal of Fire Sciences 35, 179-194 (2017), [doi: 10.1177/0734904117698843, LillOA]
  121. P. TRANCHARD, F. Samyn, S. Duquesne, B. Estèbe, S. Bourbigot, Modelling Behaviour of a Carbon Epoxy Composite Exposed to Fire: Part I-Characterisation of Thermophysical Properties., Materials 10, 494 (2017), [doi: 10.3390/ma10050494, LillOA]
  120. P. TRANCHARD, F. Samyn, S. Duquesne, B. Estèbe, S. Bourbigot, Modelling Behaviour of a Carbon Epoxy Composite Exposed to Fire: Part II-Comparison with Experimental Results., Materials 10, 470 (2017), [doi: 10.3390/ma10050470, LillOA]
  119. N. Lesaffre, S. Bellayer, H. Vezin, G. Fontaine, M. Jimenez, S. Bourbigot, Recent advances on the ageing of flame retarded PLA: Effect of UV-light and/or relative humidity, Polymer Degradation and Stability 139, 143-164 (2017), [doi: 10.1016/j.polymdegradstab.2017.04.007, LillOA]
  118. B. Girardin, G. Fontaine, S. Duquesne, M. Försth, S. Bourbigot, Measurement of kinetics and thermodynamics of the thermal degradation for flame retarded materials: Application to EVA/ATH/NC, Journal of Analytical and Applied Pyrolysis 124, 130-148 (2017), [doi: 10.1016/j.jaap.2016.12.034, LillOA]
  117. C.I. Idumah, A. Hassan, S. Bourbigot, Influence of exfoliated graphene nanoplatelets on flame retardancy of kenaf flour polypropylene hybrid nanocomposites, Journal of Analytical and Applied Pyrolysis 123, 65-72 (2017), [doi: 10.1016/j.jaap.2017.01.006, LillOA]
  116. B. Rimez, H. Rahier, M. Biesemans, S. Bourbigot, B. Van Mele, Modelled decomposition mechanism of flame retarded poly(vinyl acetate) by melamine isocyanurate, Journal of Thermal Analysis and Calorimetry 127, 2315-2324 (2017), [doi: 10.1007/s10973-016-5783-1, LillOA]
• 2016
  115. A.D. Naik, S. Duquesne, S. Bourbigot, Hydrocarbon time-temperature curve under airjet perturbation: An in situ method to probe char stability and integrity in reactive fire protection coatings, Journal of Fire Sciences 34, 385-397 (2016), [doi: 10.1177/0734904116658049, LillOA]
  114. Y. Ding, M.B. Mckinnon, S.I. Stoliarov, G. Fontaine, S. Bourbigot, Determination of kinetics and thermodynamics of thermal decomposition for polymers containing reactive flame retardants: Application to poly(lactic acid) blended with melamine and ammonium polyphosphate, Polymer Degradation and Stability 129, 347-362 (2016), [doi: 10.1016/j.polymdegradstab.2016.05.014, LillOA]
  113. B. Rimez, G. Van Assche, S. Bourbigot, H. Rahier, Modelled decomposition kinetics of flame retarded poly(vinyl acetate), Polymer Degradation and Stability 130, 245-256 (2016), [doi: 10.1016/j.polymdegradstab.2016.06.021, LillOA]
  112. B.K. Cirpici, Y. Wang, B. Rogers, S. Bourbigot, A theoretical model for quantifying expansion of intumescent coating under different heating conditions, Polymer Engineering & Science 56, 798-809 (2016), [doi: 10.1002/pen.24308, LillOA]
  111. B. Girardin, G. Fontaine, S. Duquesne, S. Bourbigot, Fire tests at reduced scale as powerful tool to fasten the development of flame-retarded material: Application to cables, Journal of Fire Sciences 34, 240-264 (2016), [doi: 10.1177/0734904116642618, LillOA]
  110. S. Zhang, W. Tang, X. Gu, P. Jiang, J. Sun, S. Duquesne, S. Bourbigot, M. Casetta, Flame retardancy and thermal and mechanical performance of intercalated, layered double hydroxide composites of polyamide 11, aluminum phosphinate, and sulfamic acid, Journal of Applied Polymer Science 133, (2016), [doi: 10.1002/app.43370, LillOA]
  109. B. Prieur, M. Meub, M. Wittemann, R. Klein, S. Bellayer, G. Fontaine, S. Bourbigot, Phosphorylation of lignin to flame retard acrylonitrile butadiene styrene (ABS), Polymer Degradation and Stability 127, 32-43 (2016), [doi: 10.1016/j.polymdegradstab.2016.01.015, LillOA]
  108. M. Jimenez, S. Bellayer, A.D. Naik, P. Bachelet, S. Duquesne, S. Bourbigot, Topcoats versus Durability of an Intumescent Coating, Industrial and Engineering Chemistry Research 55, 9625-9632 (2016), [doi: 10.1021/acs.iecr.6b02484, LillOA]
  107. M. Jimenez, T. Guin, S. Bellayer, R. Dupretz, S. Bourbigot, J.C. Grunlan, Microintumescent mechanism of flame retardant water-based chitosan-ammonium polyphosphate multinlayer nanocoating on cotton fabric, Journal of Applied Polymer Science 133, 43783 (2016), [doi: 10.1002/app.43783, LillOA]
  106. N. Lesaffre, S. Bellayer, G. Fontaine, M. Jimenez, S. Bourbigot, Revealing the impact of ageing on a flame retarded PLA, Polymer Degradation and Stability 127, 88-97 (2016), [doi: 10.1016/j.polymdegradstab.2015.10.019, LillOA]
  105. S. Bellayer, M. Jimenez, S. Barrau, S. Bourbigot, Fire retardant sol-gel coatings for flexible polyurethane foams, RSC Advances 6, 28543-28554 (2016), [doi: 10.1039/C6RA02094A, LillOA]
• 2015
  104. F. Bonnet, F. Stoffelbach, G. Fontaine, S. Bourbigot, Continuous cyclo-polymerisation ofl-lactide by reactive extrusion using atoxic metal-based catalysts: easy access to well-defined polylactide macrocycles, RSC Advances 5, 31303-31310 (2015), [doi: 10.1039/C4RA16634E, LillOA]
  103. J. Alongi, F. Cuttica, F. Carosio, S. Bourbigot, How much the fabric grammage may affect cotton combustion?, Cellulose 22, 3477-3489 (2015), [doi: 10.1007/s10570-015-0717-9, LillOA]
  102. J. Alongi, F. Cuttica, S. Bourbigot, G. Malucelli, Thermal and flame retardant properties of ethylene vinyl acetate copolymers containing deoxyribose nucleic acid or ammonium polyphosphate, Journal of Thermal Analysis and Calorimetry (2015), [doi: 10.1007/s10973-015-4808-5, LillOA]
  101. B. Girardin, G. Fontaine, S. Duquesne, M. Försth, S. Bourbigot, Characterization of thermo-physical properties of EVA/ATH: Application to gasification experiments and pyrolysis modeling, Materials 8;1, 7837-7863 (2015), [doi: 10.3390/ma8115428, LillOA]
  100. R. Dupretz, G. Fontaine, S. Duquesne, S. Bourbigot, Instrumentation of UL-94 test: understanding of mechanisms involved in fire retardancy of polymers, Polymers for Advanced Technologies 26, 865-873 (2015), [doi: 10.1002/pat.3507, LillOA]
  99. J. Alongi, Z. Han, S. Bourbigot, Intumescence: Tradition versus novelty. A comprehensive review, Progress in Polymer Science (2015), [doi: 10.1016/j.progpolymsci.2015.04.010, LillOA]
  98. R. Crétois, N. Follain, E. Dargent, J. Soulestin, S. Bourbigot, S. Marais, L. Lebrun, Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) based nanocomposites: Influence of the microstructure on the barrier properties, Physical Chemistry Chemical Physics 17, 11313-11323 (2015), [doi: 10.1039/c4cp05524a, LillOA]
  97. P. Jiang, X. Gu, S. Zhang, J. Sun, R. Xu, S. Bourbigot, S. Duquesne, M. Casetta, Flammability and thermal degradation of poly (lactic acid)/polycarbonate alloys containing a phosphazene derivative and trisilanollsobutyl POSS, Polymer 79, 221-231 (2015), [doi: 10.1016/j.polymer.2015.10.029, LillOA]
  96. R. Heidar-Pour, M. Soheilmoghaddam, A. Hassan, S. Bourbigot, Flammability and thermal properties of polycarbonate /acrylonitrile-butadiene-styrene nanocomposites reinforced with multilayer graphene, Polymer Degradation and Stability 120, 88-97 (2015), [doi: 10.1016/j.polymdegradstab.2015.06.013, LillOA]
  95. B.K. Kandola, P. Luangtriratana, S. Duquesne, S. Bourbigot, The effects of thermophysical properties and environmental conditions on fire performance of intumescent coatings on glass fibre-reinforced epoxy composites, Materials 8;8, 5216-5237 (2015), [doi: 10.3390/ma8085216, LillOA]
  94. B. Rimez, H. Rahier, M. Biesemans, S. Bourbigot, B. Van Mele, Flame retardancy and degradation mechanism of poly(vinyl acetate) in combination with intumescent flame retardants: I. Ammonium poly(phosphate), Polymer Degradation and Stability 121, 321-330 (2015), [doi: 10.1016/j.polymdegradstab.2015.09.024, LillOA]
  93. F. Carosio, G. Fontaine, J. Alongi, S. Bourbigot, Starch-Based Layer by Layer Assembly: Efficient and Sustainable Approach to Cotton Fire Protection, ACS Applied Materials & Interfaces 7;22, 12158-12167 (2015), [doi: 10.1021/acsami.5b02507, LillOA]
  92. A.D. Naik, G. Fontaine, S. Bellayer, S. Bourbigot, Crossing the Traditional Boundaries: Salen-Based Schiff Bases for Thermal Protective Applications, ACS Applied Materials & Interfaces 7;38, 21208-21217 (2015), [doi: 10.1021/acsami.5b05164, LillOA]
  91. P. TRANCHARD, F. Solarski, S. Duquesne, M. Thomas, B. Estèbe, J..-L. Montès, S. Bourbigot, Fire behaviour of carbon fibre epoxy composite for aircraft: Novel test bench and experimental study, Journal of Fire Sciences 33, 247-266 (2015), [doi: 10.1177/0734904115584093, LillOA]
  90. M. Jimenez, N. Lesaffre, S. Bellayer, R. Dupretz, M. Vandenbossche, S. Duquesne, S. Bourbigot, Novel flame retardant flexible polyurethane foam: plasma induced graft-polymerization of phosphonates, RSC Advances 5, 63853-63865 (2015), [doi: 10.1039/C5RA08289G, LillOA]
  89. J. Bardon, K. Apaydin, A. Laachachi, M. Jimenez, T. Fouquet, F. Hilt, S. Bourbigot, D. Ruch, Characterization of a plasma polymer coating from an organophosphorus silane deposited at atmospheric pressure for fire-retardant purposes, Progress in Organic Coatings 88, 39-47 (2015), [doi: 10.1016/j.porgcoat.2015.06.005, LillOA]
  88. C. Hoffendahl, S. Duquesne, G. Fontaine, F. Taschner, M. Mezger, S. Bourbigot, The combination of aluminum trihydroxide (ATH) and melamine borate (MB) as fire retardant additives for elastomeric ethylene vinyl acetate (EVM)., Polymer Degradation and Stability 115, 77-88 (2015), [doi: 10.1016/j.polymdegradstab.2015.03.001, LillOA]
  87. D. Battegazzore, J. Alongi, G. Fontaine, A. Frache, S. Bourbigot, G. Malucelli, Bulk vs.surface flame retardancy of fully bio-based polyamide 10,10, RSC Advances 5, 39424-39432 (2015), [doi: 10.1039/C5RA04149J, LillOA]
  86. F.E. Ngohang, G. Fontaine, L. Gay, S. Bourbigot, Smoke composition using MLC/FTIR/ELPI: Application to flame retarded ethylene vinyl acetate, Polymer Degradation and Stability 115, 89-109 (2015), [doi: 10.1016/j.polymdegradstab.2015.03.002, LillOA]
  85. A.D. Naik, G. Fontaine, S. Bellayer, S. Bourbigot, Salen based Schiff bases to flame retard thermoplastic polyurethane mimicking operational strategies of thermosetting resin, RSC Advances 5, 48224-48235 (2015), [doi: 10.1039/C5RA06242J, LillOA]
  84. S. Bellayer, M. Jimenez, B. Gardelle, G. Delaplace, J. Bouquerel, S. Duquesne, S. Bourbigot, The electron microanalyzer (EPMA): a powerful device for the microanalysis of filled polymeric materials, Polymers for Advanced Technologies (2015), [doi: 10.1002/pat.3523, LillOA]
  83. J. Alongi, A.D. Blasio, J. Milnes, G. Malucelli, S. Bourbigot, B.K. Kandola, G. Camino, THERMAL DEGRADATION OF DNA, AN ALL-IN-ONE NATURAL INTUMESCENT FLAME RETARDANT, Polymer Degradation and Stability 113, 110-118 (2015), [doi: 10.1016/j.polymdegradstab.2014.11.001, LillOA]
  82. A. Witkowski, B. Girardin, M. Försth, F. Hewitt, G. Fontaine, S. Duquesne, S. Bourbigot, T.R. Hull, DEVELOPMENT OF AN ANAEROBIC PYROLYSIS MODEL FOR FIRE RETARDANT CABLE SHEATHING MATERIALS, Polymer Degradation and Stability 113, 208-217 (2015), [doi: 10.1016/j.polymdegradstab.2015.01.006, LillOA]
  81. C. Hoffendahl, G. Fontaine, S. Duquesne, F. Taschner, M. Mezger, S. Bourbigot, DECOMPOSITION MECHANISM OF FIRE RETARDED ETHYLENE VINYL ACETATE ELASTOMER (EVA) CONTAINING ALUMINUM TRIHYDROXIDE AND MELAMINE, Polymer Degradation and Stability 113, 168-179 (2015), [doi: 10.1016/j.polymdegradstab.2014.09.016, LillOA]
  80. M. Coquelle, S. Duquesne, M. Casetta, J. Sun, X. Gu, S. Zhang, S. Bourbigot, Flame Retardancy of PA6 Using a Guanidine Sulfamate/Melamine Polyphosphate Mixture, Polymers 7;2, 316-332 (2015), [doi: 10.3390/polym7020316, LillOA]
  79. K. Apaydin, A. Laachachi, T. Fouquet, M. Jimenez, S. Bourbigot, D. Ruch, LAYER-BY-LAYER DEPOSITION OF A TIO2-FILLED INTUMESCENT COATING AND ITS EFFECT ON THE FLAME RETARDANCY OF POLYAMIDE AND POLYESTER FABRICS, Colloids and Surfaces A. Physicochemical and Engineering Aspects 469, 1-10 (2015), [doi: 10.1016/j.colsurfa.2014.12.021, LillOA]
  78. S. Duquesne, F. Solarski, P. Ouagne, S. Bourbigot, FLAME RETARDANCY AND MECHANICAL PROPERTIES OF FLAX REINFORCED WOVEN COMPOSITE, journal of industrial textiles 44;5, 665-681 (2015), [doi: 10.1177/1528083713505633, LillOA]
• 2014
  77. J. Sun, X. Gu, S. Zhang, M. Coquelle, S. Bourbigot, S. Duquesne, M. Casetta, Improving the flame retardancy of polyamide 6 by incorporating hexachlorocyclotriphosphazene modified MWNT, Polymers for Advanced Technologies 25, 1099-1107 (2014), [doi: 10.1002/pat.3358, LillOA]
  76. A.D. Naik, G. Fontaine, F. Solarski, S. Bellayer, X. Delva, Y. Bourgeois, S. Bourbigot, OUTLINING THE MECHANISM OF FLAME RETARDANCY IN POLYAMIDE 66 BLENDED WITH MELAMINE POLY(ZINC PHOSPHATE), Fire Safety Journal 70, 46-60 (2014), [doi: 10.1016/j.firesaf.2014.08.019, LillOA]
  75. A. Gallos, G. Fontaine, S. Bourbigot, INFLUENCE OF MWNT AND -TROPOLONE ON THERMAL STABILITY AND CRYSTALLINITY BEHAVIOR OF STEREOCOMPLEXED POLY-L,D-LACTIDES, Industrial and Engineering Chemistry Research 53;22, 9377-9382 (2014), [doi: 10.1021/ie403657p, LillOA]
  74. G. Stoclet, M. Sclavons, B. Lecouvet, J. Devaux, P.V. Velthem, S. Bourbigot, N. Sallem-Idrissi, ELABORATION OF POLY(LACTIC ACID)/HALLOYSITE NANOCOMPOSITES BY MEANS OF WATER ASSISTED EXTRUSION: STRUCTURE, MECHANICAL PROPERTIES AND FIRE PERFORMANCE, RSC Advances 4, 57553-57563 (2014), [doi: 10.1039/c4ra06845a, LillOA]
  73. K. Apaydin, A. Laachachi, T. Fouquet, M. Jimenez, S. Bourbigot, D. Ruch, Mechanistic investigation of flame retardant coatings made by Layer-by-Layer, RSC Advances 4;82, 43326-43334 (2014), [doi: 10.1039/C4RA08500K, LillOA]
  72. S. Bourbigot, PROTECTION MECHANISM OF A FLAME RETARDED PA6 NANOCOMPOSITE, Journal of Fire Sciences 32;3, pp. 241-256 (2014), [doi: 10.1177/0734904113510685, LillOA]
  71. C. Hoffendahl, G. Fontaine, S. Duquesne, F. Taschner, M. Mezger, S. Bourbigot, DECOMPOSITION MECHANISM OF MELAMINE BORATE IN PYROLYTIC AND THERMO-OXIDATIVE CONDITIONS, Thermochimica Acta 590, pp. 73-83 (2014), [doi: 10.1016/j.tca.2014.06.016, LillOA]
  70. J. Alongi, J. Milnes, G. Malucelli, S. Bourbigot, B.K. Kandola, THERMAL DEGRADATION OF DNA-TREATED COTTON FABRICS UNDER DIFFERENT HEATING CONDITIONS, Journal of Analytical and Applied Pyrolysis 108, pp. 212-221 (2014), [doi: 10.1016/j.jaap.2014.04.014, LillOA]
  69. M. Coquelle, S. Duquesne, M. Casetta, J. Sun, S. Zhang, S. Bourbigot, INVESTIGATION OF THE DECOMPOSITION PATHWAY OF POLYAMIDE 6/AMMONIUM SULFAMATE FIBERS, Polymer Degradation and Stability 106, pp. 150-157 (2014), [doi: 10.1016/j.polymdegradstab.2014.02.007, LillOA]
  68. C. Hoffendahl, G. Fontaine, S. Duquesne, F. Taschner, M. Mezger, S. Bourbigot, FIRE RETARDANT MECHANISM OF ETHYLENE VINYL ACETATE ELASTOMER (EVM) CONTAINING ALUMINIUM TRIHYDROXIDE AND MELAMINE PHOSPHATE, RSC Advances 4, pp. 20185-20199 (2014), [doi: 10.1039/c4ra01111b, LillOA]
  67. R. Dupretz, G. Fontaine, S. Bourbigot, FIRE RETARDANCY OF A NEW POLYPROPYLENE-GRAFTED STARCH PART II: MECHANISMS OF FIRE RETARDANCY, Journal of Fire Sciences 32;3, pp. 210-229 (2014), [doi: 10.1177/0734904113508725, LillOA]
  66. F.E. Ngohang, G. Fontaine, L. Gay, S. Bourbigot, REVISITED INVESTIGATION OF FIRE BEHAVIOR OF ETHYLENE VINYL ACETATE/ALUMINUM TRIHYDROXIDE USING A COMBINATION OF MASS LOSS CONE, FOURIER TRANSFORM INFRARED SPECTROSCOPY AND ELECTRICAL LOW PRESSURE IMPACTOR, Polymer Degradation and Stability 106, pp. 26-35 (2014), [doi: 10.1016/j.polymdegradstab.2014.01.019, LillOA]
  65. B. Gardelle, S. Duquesne, P. Vandereecken, S. Bourbigot, RESISTANCE TO FIRE OF SILICONE BASED COATINGS: FIRE PROTECTION OF STEEL AGAINST CELLULOSIC FIRE, Journal of Fire Sciences 32;4, 374-387 (2014), [doi: 10.1177/0734904114522390, LillOA]
  64. R. Crétois, N. Follain, E. Dargent, J. Soulestin, S. Bourbigot, S. Marais, L. Lebrun, MICROSTRUCTURE AND BARRIER PROPERTIES OF PHBV/ORGANOCLAYS BIONANOCOMPOSITES, Journal of Membrane Science 467, pp. 56-66 (2014), [doi: 10.1016/j.memsci.2014.05.015, LillOA]
  63. A.D. Naik, G. Fontaine, F. Solarski, X. Delva, J. Louisy, S. Bellayer, Y. Bourgeois, S. Bourbigot, MAPPING THE MULTIMODAL ACTION OF MELAMINE-POLY(ALUMINIUM PHOSPHATE) IN THE FLAME RETARDANCY OF POLYAMIDE 66, RSC Advances 4, pp. 18406-18418 (2014), [doi: 10.1039/c4ra02005g, LillOA]
  62. B. Lecouvet, M. Sclavons, S. Bourbigot, C. Bailly, HIGHLY LOADED POLYAMIDE 12/HALLOYSITE NANOCOMPOSITE FILMS AS FIRE PROTECTIVE COATING FOR POLYMERIC SUBSTRATES, Journal of Fire Sciences 32;2, pp. 145-164 (2014), [doi: 10.1177/0734904113500207, LillOA]
  61. B. Lecouvet, M. Sclavons, S. Bourbigot, C. Bailly, TOWARDS SCALABLE PRODUCTION OF POLYAMIDE 12/HALLOYSITE NANOCOMPOSITES VIA WATER-ASSISTED EXTRUSION: MECHANICAL MODELLING, THERMAL AND FIRE PROPERTIES, Polymers for Advanced Technologies 25, 137-151 (2014), [doi: 10.1002/pat.3215, LillOA]
  60. K. Apaydin, A. Laachachi, V. Ball, M. Jimenez, S. Bourbigot, V. Toniazzo, D. Ruch, Intumescent coating of (polyallylamine-polyphosphates) deposited on polyamide fabrics via layer-by-layer technique, Polymer Degradation and Stability 106, 158-164 (2014), [doi: 10.1016/j.polymdegradstab.2014.01.006, LillOA]
  59. S. Duquesne, M. Jimenez, S. Bourbigot, Aging of the flame-retardant properties of polycarbonate and polypropylene protected by an intumescent coating, Journal of Applied Polymer Science 131;3, art n° 39566 (2014), [doi: 10.1002/app.39566, LillOA]
• 2013
  58. R. Dupretz, G. Fontaine, S. Bourbigot, Fire retardancy of a new polypropylene-grafted starch, Journal of Fire Sciences 31;6, 563-575 (2013), [doi: 10.1177/0734904113487491, LillOA]
  57. S. Bourbigot, APPLICATIONS OF INTUMESCENCE FOR REACTION AND RESISTANCE TO FIRE OF MATERIALS, Materials China 32, 9-15 (2013), [doi: 10.7502/j.issn.1674-3962.2013.03.02, LillOA]
  56. A.D. Naik, G. Fontaine, F. Solarski, X. Delva, Y. Bourgeois, S. Bourbigot, MELAMINE INTEGRATED METAL PHOSPHATES AS NON-HALOGENATED FLAME RETARDANTS: SYNERGISM WITH ALUMINIUM PHOSPHINATE FOR FLAME RETARDANCY IN GLASS FIBER REINFORCED POLYAMIDE 66, Polymer Degradation and Stability (2013), [doi: 10.1016/j.polymdegradstab.2013.09.029, LillOA]
  55. B. Gardelle, S. Duquesne, P. Vanderecken, S. Bourbigot, RESISTANCE TO FIRE OF INTUMESCENT SILICONE BASED COATING: THE ROLE OF ORGANOCLAY, Progress in Organic Coatings 71, 1633-1641 (2013), [doi: 10.1016/j.porgcoat.2013.07.011, LillOA]
  54. B. Lecouvet, M. Sclavons, C. Bailly, S. Bourbigot, A COMPREHENSIVE STUDY OF THE SYNERGISTIC FLAME RETARDANT MECHANISMS OF HALLOYSITE IN INTUMESCENT POLYPROPYLENE, Polymer Degradation and Stability (2013), [doi: 10.1016/j.polymdegradstab.2013.08.024, LillOA]
  53. M. Muller, S. Bourbigot, S. Duquesne, R. Klein, G. Gianini, C. Lindsay, J. Vlassenbroeck, INVESTIGATION OF THE SYNERGY IN INTUMESCENT POLYURETHANE BY 3D COMPUTED TOMOGRAPHY, Polymer Degradation and Stability 98;9, 1638-1942 (2013), [doi: 10.1016/j.polymdegradstab.2013.06.018, LillOA]
  52. A. Gallos, G. Fontaine, S. Bourbigot, REACTIVE EXTRUSION OF STEREOCOMPLEXED POLY-L,D-LACTIDES: PROCESSING, CHARACTERIZATION AND PROPERTIES, Macromolecular Materials and Engineering 298;9, 1016-1023 (2013), [doi: 10.1002/mame.201200271, LillOA]
  51. B. Lecouvet, M. Sclavons, S. Bourbigot, C. Bailly, THERMAL AND FLAMMABILITY PROPERTIES OF POLYETHERSULFONE/HALLOYSITE NANOCOMPOSITES PREPARED BY MELT COMPOUNDING, Polymer Degradation and Stability 98, 1993-2004 (2013), [doi: 10.1016/j.polymdegradstab.2013.07.013, LillOA]
  50. K. Apaydin, A. Laachachi, V. Ball, M. Jimenez, S. Bourbigot, V. Toniazzo, D. Ruch, Polyallylamine-montmorillonite as super flame retardant coating assemblies by layer-by layer deposition on polyamide, Polymer Degradation and Stability 98, 627-634 (2013), [doi: 10.1016/j.polymdegradstab.2012.11.006, LillOA]
  49. B. Gardelle, S. Duquesne, P. Vanderecken, S. Bellayer, S. Bourbigot, RESISTANCE TO FIRE OF CURABLE SILICONE/EXPANDABLE GRAPHITE BASED COATING: EFFECT OF THE CATALYST, European Polymer Journal 49;8, 1633-1641 (2013), [doi: 10.1016/j.eurpolymj.2013.04.021, LillOA]
  48. N. Tenn, N. Follain, J. Soulestin, R. Crétois, S. Bourbigot, S. Marais, EFFECT OF NANOCLAY HYDRATION ON BARRIER PROPERTIES OF PLA/MONTMORILLONITE BASED NANOCOMPOSITES, Journal of Physical Chemistry. Part C 117;23, 12117-12135 (2013), [doi: 10.1021/jp401546t, LillOA]
  47. S. Bourbigot, P. Bachelet, F. Solarski, M. Jimenez, S. Duquesne, Intumescence as method for providing fire resistance to structural composites: Application to poly(ethylene terephtalate) foam sandwich-structured composite, Composite Interfaces 20;4, 269-277 (2013), [doi: 10.1080/15685543.2013.793586, LillOA]
  46. M. Muller, S. Bourbigot, S. Duquesne, R. Klein, G. Gianini, C. Lindsay, MEASUREMENT AND INVESTIGATION OF INTUMESCENT CHAR STRENGTH: APPLICATION TO POLYURETHANES, Journal of Fire Sciences 31;4, 293-308 (2013), [doi: 10.1177/0734904112472015, LillOA]
  45. S. Duquesne, P. Bachelet, S. Bellayer, S. Bourbigot, W. Mertens, INFLUENCE OF INORGANIC FILLERS ON THE FIRE PROTECTION OF INTUMESCENT COATINGS, Journal of Fire Sciences 31, 258-275 (2013), [doi: 10.1177/0734904112467291, LillOA]
  44. J. Louisy, S. Bourbigot, S. Duquesne, P. Desbois, A. König, M. Klatt, NOVEL SYNERGISTS FOR FLAME RETARDED GLASS-FIBER REINFORCED POLY(1,4-BUTYLENETEREPHTALATE), Polymery 58, 403-412 (2013), [doi: 10.14314/polimery.2013.403, LillOA]
  43. C. Hoffendahl, G. Fontaine, S. Bourbigot, FLAME RETARDANCY OF BIO-BASED POLYETHER-BLOCK-AMIDE POLYMER (PEBAX), Polymer Degradation and Stability 98;6, 1247-1255 (2013), [doi: 10.1016/j.polymdegradstab.2013.03.002, LillOA]
  42. B. Gardelle, S. Duquesne, P. Vanderecken, S. Bourbigot, CHARACTERIZATION OF THE CARBONIZATION PROCESS OF EXPANDABLE GRAPHITE/SILICONE FORMULATIONS IN A SIMULATED FIRE, Polymer Degradation and Stability 98;5, 1052-1063 (2013), [doi: 10.1016/j.polymdegradstab.2013.02.001, LillOA]
  41. S. Bourbigot, O. Cérin, S. Duquesne, N. Clavel, Flame retardancy of bitumen: a calorimetric study, Journal of Fire Sciences 31;2, 109-127 (2013), [doi: 10.1177/0734904112458240, LillOA]
  40. S. Bourbigot, L. Garnier, B. Revel, S. Duquesne, Characterization of the morphology of iPP/sPP blends with various compositions, eXpress Polymer Letters 7;3, 224-237 (2013), [doi: 10.3144/expresspolymlett.2013.21, LillOA]
  39. B. Gardelle, S. Duquesne, V. Rerat, S. Bourbigot, Thermal degradation and fire performance of intumescent silicone-based coatings, Polymers for Advanced Technologies 24, 62-69 (2013), [doi: 10.1002/pat.3050, LillOA]
  38. A. Gallos, G. Fontaine, S. Bourbigot, Reactive extrusion of intumescent stereocomplexed poly L,D lactide : characterization and reaction to fire, Polymers for Advanced Technologies 24, 130-133 (2013), [doi: 10.1002/pat.3058, LillOA]
  37. M. Jimenez, S. Duquesne, S. Bourbigot, Enhanced fire retardant properties of glass-fiber reinforced Polyamide 6,6 by combining bulk and surface treatments: Toward a better understanding of the fire-retardant mechanism, Polymer Degradation and Stability 98;7, 1378-1388 (2013), [doi: 10.1016/j.polymdegradstab.2013.03.026, LillOA]
  36. M. Jimenez, S. Bellayer, B. Revel, S. Duquesne, S. Bourbigot, Comprehensive Study of the Influence of Different Aging Scenarios on the Fire Protective Behavior of an Epoxy Based Intumescent Coating, Industrial and Engineering Chemistry Research 52;2, 729-743 (2013), [doi: 10.1021/ie302137g, LillOA]
  35. S. Duquesne, O. Cérin-Delaval, G. Fontaine, G. Tricot, S. Bourbigot, G. Tricot, STUDY OF THE THERMAL DEGRADATION OF AN ALUMINIUM PHOSPHINATE - ALUMINIUM TRIHYDRATE COMBINATION, Thermochimica Acta 551, 175-183 (2013), [doi: 10.1016/j.tca.2012.10.025, LillOA]
  34. M. Vandenbossche, M. Jimenez, M. Casetta, S. Bellayer, A. Beaurain, S. Bourbigot, M. Traisnel, Chitosan-grafted nonwoven geotextile for heavy metal sorption in sediments, Reactive and Functional Polymers 73, 53-59 (2013), [doi: 10.1016/j.reactfunctpolym.2012.09.002, LillOA]
• 2012
  33. W. Liu, S. Zhang, S. Bourbigot, J. Sun, L. Yu, Q. Feng, X. Chen, X. Zhu, BURNING BEHAVIOR AND THERMAL DEGRADATION KINETICS OF SURFACE PHOTOGRAFTED POLYAMIDE 6.6 FABRIC, Polymers for Advanced Technologies 23;12, 1550-1554 (2012), [doi: 10.1002/pat.3028, LillOA]
  32. B. Lecouvet, S. Bourbigot, M. Sclavons, C. Bailly, KINETICS OF THE THERMAL AND THERMO-OXIDATIVE DEGRADATION OF POLYPROPYLENE/HALLOYSITE NANOCOMPOSITES, Polymer Degradation and Stability 97;9, 1745-1754 (2012), [LillOA]
  31. S. Alix, N. Follain, N. Tenn, B. Alexandre, S. Bourbigot, J. Soulestin, S. Marais, BARRIER PROPERTIES OF PA6 NANOCOMPOSITES WITH HIGHLY EXFOLIATED AND ORIENTED ORGANOCLAYS, Journal of Physical Chemistry. Part C 116;8, 4937-4947 (2012), [doi: 10.1021/jp2052344, LillOA]
  30. J. Soulestin, B.J. Rashmi, S. Bourbigot, M.-F. Lacrampe, P. Krawczak, MECHANICAL AND OPTICAL PROPERTIES OF POLYAMIDE 6/CLAY NANOCOMPOSITE CAST FILMS: INFLUENCE OF THE DEGREE OF EXFOLIATION, Macromolecular Materials and Engineering 297;5, 444-454 (2012), [doi: 10.1002/mame.20110020, LillOA]
  29. F. Samyn, S. Bourbigot, THERMAL DECOMPOSITION OF FLAME RETARDED FORMULATIONS PA6/ALUMINUM PHOSPHINATE/MELAMINE POLYPHOSPHATE/ORGANOMODIFIED CLAY: INTERACTIONS BETWEEN THE CONSTITUENTS?, Polymer Degradation and Stability 97;11, 2217-2230 (2012), [doi: 10.1016/j.polymdegradstab.2012.08.004, LillOA]
  28. S. Bourbigot, P. Bachelet, M. Jimenez, S. Duquesne, Intumescent coating providing fire resistance to materials, European Coatings Journal 9, 28-33 (2012), [LillOA]
  27. M. Jimenez, H. Gallou, S. Duquesne, c. Jama, S. Bourbigot, X. Couillens, F. Speroni, New routes to flame retard PA6,6 for electrical applications, Journal of Fire Sciences 30, 535-551 (2012), [doi: 10.1177/0734904112449992, LillOA]
  26. M. Jimenez, S. Duquesne, S. Bourbigot, Fire protection of polypropylene and polycarbonate by intumescent coatings, Polymers for Advanced Technologies 23;1, 130-135 (2012), [doi: 10.1002/pat.1809, LillOA]
  25. C. Gérard, G. Fontaine, S. Bellayer, S. Bourbigot, Reaction to fire of an intumescent epoxy resin: Protection mechanisms and synergy, Polymer Degradation and Stability 97;8, 1366-1386 (2012), [doi: 10.1016/j.polymdegradstab.2012.05.025, LillOA]
• 2011
  24. O. Cérin, S. Duquesne, G. Fontaine, A. Roos, S. Bourbigot, THERMAL DEGRADATION OF ELASTOMERIC VULCANIZED POLY(ETHYLENE-CO-VINYLACETATE): CHEMICAL AND KINETIC INVESTIGATIONS, Polymer Degradation and Stability 96, 1812-1820 (2011), [doi: 10.1016/j.polymdegradstab.2011.07.015, LillOA]
  23. C. Gérard, G. Fontaine, S. Bourbigot, Synergistic and antagonistic effects in flame retardancy of an intumescent epoxy resin, Polymers for Advanced Technologies 22;7, 1085-1090 (2011), [doi: 10.1002/pat.1996, LillOA]
  22. B. Lecouvet, M. Sclavons, S. Bourbigot, J. Devaux, C. Bailly, WATER-ASSISTED EXTRUSION AS A NOVEL PROCESSING ROUTE TO PREPARE POLYPROPYLENE/HALLOYSITE NANOTUBE NANOCOMPOSITES: STRUCTURE AND PROPERTIES, Polymer 52, 4284-4295 (2011), [doi: 10.1016/j.polymer.2011.07.021, LillOA]
  21. F. Salaün, M. Lewandowski, I. Vroman, G. Bedek, S. Bourbigot, DEVELOPMENT AND CHARACTERISATION OF FLAME-RETARDANT FIBRES FROM ISOTACTIC POLYPROPYLENE MELT-COMPOUNDED WITH MELAMINE-FORMALDEHYDE MICROCAPSULES, Polymer Degradation and Stability 96, 131-143 (2011), [doi: 10.1016/j.polymdegradstab.2010.10.009, LillOA]
  20. B. Gardelle, S. Duquesne, C. Vu, S. Bourbigot, THERMAL DEGRADATION AND FIRE PERFORMANCE OF POLYSILAZANE-BASED COATINGS, Thermochimica Acta 519, 28-37 (2011), [doi: 10.1016/j.tca.2011.02.025, LillOA]
  19. S. Bourbigot, G. Fontaine, A. Gallos, S. Bellayer, Reactive extrusion of PLA and of PLA/carbon nanotubes nanocomposite: Processing, characterization and flame retardancy, Polymers for Advanced Technologies 22;1, 30-37 (2011), [doi: 10.1002/pat.1715, LillOA]
  18. S. Bellayer, E. Tavard, S. Duquesne, A. Piechaczyk, S. Bourbigot, Natural mineral fire retardant fillers for polyethylene, Fire and Materials 35;3, 183-192 (2011), [doi: 10.1002/fam.1048, LillOA]
  17. M. Casetta, D. Delaval, M. Traisnel, S. Bourbigot, Influence of the recycling process on the fire-retardant properties of PP/EPR blends, Macromolecular Materials and Engineering 296;6, 494-505 (2011), [doi: 10.1002/mame.201000334, LillOA]
  16. M. Casetta, D. Delaval, M. Traisnel, S. Bourbigot, Reprocessed high impact polypropylene containing oil pollutant exhibiting flame retardant properties, Macromolecular Symposia 301;1, 31-39 (2011), [doi: 10.1002/masy.201150305, LillOA]
• 2010
  15. M. Jimenez, S. Duquesne, S. Bourbigot, Keeping cool in the mass-Waterborne intumescent coatings can prevent thermoplastics from burning., European Coatings Journal 10, 26-31 (2010), [LillOA]
  14. L. Garnier, S. Duquesne, S. Bourbigot, Melt spinning of silane-water cross-linked polyethylene-octene through a reactive extrusion process, Reactive and Functional Polymers 70, 775-783 (2010), [doi: 10.1016/j.reactfunctpolym.2010.07.004, LillOA]
  13. S. Bourbigot, G. Fontaine, Flame retardancy of polylactide: an overview, Polymer Chemistry 1, 1413-1422 (2010), [doi: 10.1039/c0py00106f, LillOA]
  12. M. Jimenez, S. Bellayer, S. Duquesne, S. Bourbigot, Improvement of heat resistance of high performance fibers using a cold plasma polymerization process, Surface and Coatings Technology 205, 745-758 (2010), [doi: 10.1016/j.surfcoat.2010.07.091, LillOA]
  11. I. Vroman, S. Giraud, F. Salaün, S. Bourbigot, POLYPROPYLENE FABRICS PADDED WITH MICROENCAPSULATED AMMONIUM PHOSPHATE: EFFECT OF THE SHELL STRUCTURE ON THE THERMAL STABILITY AND FIRE PERFORMANCE, Polymer Degradation and Stability 95, 315-319 (2010), [doi: 10.1016/j.polymdegradstab.2010.05.019, LillOA]
  10. F. Salaün, E. Devaux, S. Bourbigot, P. Rumeau, THERMOREGULATING RESPONSE OF COTTON FABRIC CONTAINING MICROENCAPSULATED PHASE CHANGE MATERIALS, Thermochimica Acta 506;1-2, 82-93 (2010), [doi: 10.1016/j.tca.2010.04.020, LillOA]
  9. M. Murariu, A.L. Dechief, L. Bonnaud, P. Yoann, A. Gallos, G. Fontaine, S. Bourbigot, P. Dubois, THE PRODUCTION AND PROPERTIES OF POLYLACTIDE COMPOSITES FILLED WITH EXPANDED GRAPHITE, Polymer Degradation and Stability 95, 889-900 (2010), [doi: 10.1016/j.polymdegradstab.2009.12.019, LillOA]
  8. Z. Sebih, S. Bourbigot, R. Delobel, F. Poutch, QUANTITATIVE ANALYSIS OF AUTOMOTIVE EXHAUST GAS BY FOURIER TRANSFORM INFRARED SPECTROSCOPY, International Journal of Environmental Technology and Management 13;2, 188-205 (2010), [doi: 10.1504/IJETM.2010.034301, LillOA]
  7. C. Gérard, G. Fontaine, S. Bourbigot, New Trends in Reaction and Resistance to Fire of Fire-retardant Epoxies, Materials 3, 4476-4499 (2010), [doi: 10.3390/ma3084476, LillOA]
  6. M. Murariu, L. Bonnaud, P. Yoann, G. Fontaine, S. Bourbigot, P. Dubois, New trends in polylactide (PLA)-based materials: “Green” PLA–Calcium sulfate (nano)composites tailored with flame retardant properties RETARDANT PROPERTIES, Polymer Degradation and Stability 95, 374-381 (2010), [doi: 10.1016/j.polymdegradstab.2009.11.032, LillOA]
  5. S. Bourbigot, F. Solarski, T. Turf, S. Duquesne, NANOMORPHOLOGY AND REACTION TO FIRE OF POLYURETHANE AND POLYAMIDE NANOCOMPOSITES CONTAINING FLAME RETARDANTS, Polymer Degradation and Stability 95, 320-326 (2010), [doi: 10.1016/j.polymdegradstab.2009.11.011, LillOA]
  4. S. Giraud, F. Salaün, G. Bedek, I. Vroman, S. Bourbigot, INFLUENCE OF CHEMICAL SHELL STRUCTURE ON THE THERMAL PROPERTIES OF MICROCAPSULES CONTAINING A FLAME RETARDANT AGENT, Polymer Degradation and Stability 95, 315-319 (2010), [doi: 10.1016/j.polymdegradstab.2009.11.018, LillOA]
  3. L. Urbanczyk, S. Bourbigot, C. Calberg, C. Detrembleur, C. Jérôme, F. Boschin, M. Alexandre, PREPARATION OF FIRE-RESISTANT POLY(STYRENE-CO-ACRYLONITRILE) FOAMS USING THE SUPERCRITICAL CO2 TECHNOLOGY, Journal of Materials Chemistry 20, 1567-1576 (2010), [doi: 10.1039/b917539c, LillOA]
  2. F. Salaün, E. Devaux, S. Bourbigot, P. Rumeau, INFLUENCE OF THE SOLVENT ON THE MICROENCAPSULATION OF A HYDRATED SALT, Carbohydrate polymers 79;4, 964-974 (2010), [doi: 10.1016/j.carbpol.2009.10.027, LillOA]
  1. M. Mainil, L. Urbanczyk, C. Calberg, A. Germain, C. Jérôme, S. Bourbigot, J. Devaux, M. Sclavons, MORPHOLOGY AND PROPERTIES OF SAN-CLAY NANOCOMPOSITES PREPARED PRINCIPALLY BY WATER-ASSISTED EXTRUSION, Polymer Engineering & Science 50, 10-21 (2010), [doi: 10.1002/pen.21501, LillOA]