Publications dans des revues internationales

From rheological to original three-dimensional mechanical modelling of semi-crystalline polymers: Application to a wide strain rate range and large deformation of Ultra-High Molecular Weight PolyEthylene, C.A. Bernard, O. Lame, T. Deplancke, J.-y. Cavaillé, K. Ogawa, MECHANICS OF MATERIALS, 2020, 151, 103640, doi:10.1016/j.mechmat.2020.103640
Effect of Cold Plasma Treatment on Electrospun Nanofibers Properties: A Review, M. Dufay, M. Jimenez, S. Degoutin, ACS Applied Bio Materials, 2020, 3;8, 4696-4716, doi:10.1021/acsabm.0c00154
Impact of Nanoconfinement on Polylactide Crystallization and Gas Barrier Properties, S. Fernandes Nassar, N. Delpouve, C. Sollogoub, A. Guinault, G. Stoclet, G. Régnier, S. Domenek, ACS Applied Materials & Interfaces, 2020, 12;8, 9953-9965, doi:10.1021/acsami.9b21391
Beta Phase Crystallization and Ferro- and Piezoelectric Performances of Melt-Processed Poly(vinylidene difluoride) Blends with Poly(methyl methacrylate) Copolymers Containing Ionizable Moieties, A. De Neef, C. Samuel, H. Amorín, G. Stoclet, R. Jiménez, P. Dubois, J. Soulestin, J.-M. Raquez, ACS Applied Polymer Materials, 2020, 2;9, 3766-3780, doi:10.1021/acsapm.0c00351
Poly(lactide)/cellulose nanocrystal nanocomposites by high‐shear mixing, O. Oguz, N. Candau, A. Demongeot, M.K. Citak, F.N. Cetin, G. Stoclet, V. Michaud, Y.Z. Menceloglu, Polymer Engineering & Science, 2020, 61;4, 1028-1040, doi:10.1002/pen.25621
Preparation and flame retardancy of flax fabric/polybenzoxazine laminates, F. Samyn, O. Murariu, L. Bonnaud, S. Duquesne, Fire and Materials, 2020, 45;3, 366-378, doi:10.1002/fam.2839
Plasticity and thermally-induced recovery in polycarbonate, M.N.D. Cherief, F. Zairi, N. Ding, J.-M. Gloaguen, M. Nait-Abdelaziz, M. Benguediab, Mechanics of materials . an international journal, 2020, 148, doi:10.1016/j.mechmat.2020.103515
Multiscale observation of the fatigue-induced damage mechanisms in carbon-black filled styrene-butadiene rubber, A. Dinari, M. Chaabane, T. Benameur, Q. Guo, J.-M. Gloaguen, F. Zairi, Macromolecular Materials and Engineering, 2020, -, doi:10.1002/mame.202000227
Low-Emissivity Metal/Dielectric Coatings as Radiative Barriers for the Fire Protection of Raw and Formulated Polymers, A.-L. Davesne, T. Bensabath, J. Sarazin, S. Bellayer, F. Parent, F. Samyn, M. Jimenez, F. Sanchette, ACS Applied Polymer Materials, 2020, 2;7, 2880-2889, doi:10.1021/acsapm.0c00399
Synthesis and structural characterization of lanthanide-containing polytungsto-antimonate [{sb-3(mu(3)-o)(2)ln(h2o)ln(h2o)(2)}(2)(sbw10o37)(2)(sbw8o31)(2)](22)(-)molecules deriving from the decomposition of the [sb8w36o132](24)(-)macroanion, M. Dufaye, S. Duval, G. Stoclet, D. Mara, R. Van Deun, T. Loiseau, European journal of inorganic chemistry, 2020, doi:10.1002/ejic.202000613
Organocatalytic sequential ring-opening polymerization of a cyclic ester and anionic polymerization of a vinyl monomer, R. Mundil, F. Kayser, A. Huret, G. Stoclet, P. Zinck, F. Kayser, Chemical communications (Cambridge, England), 2020, 58, doi:10.1039/d0cc02906h
Influence of ph on ce-iv-[(asw9o33)-w-iii](9-) association for the formation of hexanuclear cerium(iv) oxo-hydroxo-clusters stabilized by trivacant polyanions, M. Dufaye, S. Duval, G. Stoclet, T. Loiseau, Crystengcomm, 2020, 22, 371-380, doi:10.1039/c9ce01663e
Anisotropy of expandable graphite to explain its behavior as a flame-retardant, T. Bensabath, J. Sarazin, S. Bourbigot, Journal of Fire Sciences, 2020, 39;2, 109-118, doi:10.1177/0734904120969639
Thermal study of photopolymerization reaction in polyacrylate/liquid crystal blends, Z. Hadjou Belaid, L. Benhabib, D. Beroguiaa, F. Abdoune, L. Méchernène, U. Maschke, Materials Today: Proceedings, 2020, 31;Supplement 1, S9-S11, doi:10.1016/j.matpr.2020.05.026
Isosorbide monoacrylate: a sustainable monomer for the production of fully bio-based polyacrylates and thermosets, F. Nonque, A. Sahut, N. Jacquel, R. Saint-Loup, P. Woisel, J. Potier, Polymer Chemistry, 2020, 11;43, 6903-6909, doi:10.1039/d0py00957a
Green composites based on Atriplex halimus fibers and PLA matrix, H.L. Boudjema, H. Bendaikha, U. Maschke, Journal of Polymer Engineering, 2020, 40;8, 693-702, doi:10.1515/polyeng-2020-0068
Modification of hydroxyapatite surface properties by electron irradiation, G. Bai, J.-C. Hornez, U. Maschke, P. Supiot, E. Bres, Radiation Physics and Chemistry, 2020, 177, 109192, doi:10.1016/j.radphyschem.2020.109192
Unusual swelling of acrylate based crosslinked polymer networks in linear primary alcohols: Experimental and modeling aspects, S. Bedjaoui, L. Bedjaoui, M.-E.-A. Benbekeda, F. Dubois, D. Merah, P. Supiot, C. Foissac, U. Maschke, Journal of Molecular Liquids, 2020, 320;Part B, 114459, doi:10.1016/j.molliq.2020.114459
Photodegradation of Decabromo Diphenyl Ether Flame Retardant in Poly (Acrylonitrile Butadiene Styrene) (ABS), H. Aldoori, Z. Bouberka, A. Nadim, Y. Agguine, S. Eddarir, P. Supiot, C. Foissac, U. Maschke, Journal of Macromolecular Science Part B Physics, 2020, 59;10, 609-620, doi:10.1080/00222348.2020.1763607
Novel interpenetrating polymer network composed of poly(butyl acrylates) and poly(ethyl-hexyl acrylate), K.E. Boudraa, T. Bouchaour, C. Beyens, U. Maschke, International Journal of Polymer Analysis and Characterization, 2020, 25;1, 18-33, doi:10.1080/1023666x.2020.1737467
Pressure effects on morphology of isotropic char layer, shrinkage, cracking and reduced heat transfer of wooden material, K. Li, Y. Zou, S. Bourbigot, J. Ji, X. Chen, Proceedings of the Combustion Institute, 2020, doi:10.1016/j.proci.2020.07.072
Vers des polyesters biosourcés et recyclables, F. Bonnet, P. Zinck, Actualite Chimique, 2020, 456-458, 31-36
Substitution degree and fatty chain length influence on structure and properties of fatty acid cellulose esters, L. Duchatel-Crépy, N. Joly, P. Martin, A. Marin, J.-F. Tahon, J.-M. Lefebvre, V. Gaucher, Carbohydrate Polymers, 2020, 234, 115912, doi:10.1016/j.carbpol.2020.115912
Brittle-to-ductile transition of PLA induced by macromolecular orientation, S. Xu, J.-F. Tahon, I. De Waele, G. Stoclet, V. Gaucher, Express Polymer Letters, 2020, 14;11, 1034-1047, doi:10.3144/expresspolymlett.2020.84
Combining Low-Emissivity Thin Coating and 3D-Printed Original Designs for Superior Fire-Protective Performance, L. Geoffroy, A.-L. Davesne, F. Parent, F. Sanchette, F. Solarski, M. Jimenez, S. Bourbigot, ACS Omega, 2020, 5;43, 27857–27863, doi:10.1021/acsomega.0c02902
Manipulating the physical states of confined ibuprofen in SBA-15 based drug delivery systems obtained by solid-state loading: Impact of the loading degree, B. Malfait, N. T. Correia, C. Ciotonea, J. Dhainaut, J.-P. Dacquin, s. royer, N. Tabary, Y. Guinet, A. Hedoux, The Journal of Chemical Physics, 2020, 153;15, 154506, doi:10.1063/5.0020992
Isolation and FTIR-ATR and 1H NMR Characterization of Alginates from the Main Alginophyte Species of the Atlantic Coast of Morocco, Z. Belattmania, S. Kaidi, S. El Atouani, C. Katif, F. Bentiss, c. Jama, A. Reani, B. Sabour, V. Vasconcelos, Molecules, 2020, 25;18, 4335, doi:10.3390/molecules25184335
Flash Catalytic Pyrolysis of Polyethylene over (Alumino)silicate Materials, S. Klaimy, C. Ciotonea, J. Dhainaut, s. royer, M. Casetta, S. Duquesne, G. Tricot, J.-F. Lamonier, ChemCatChem, 2020, 12;4, 1109-1116, doi:10.1002/cctc.201901819
Bagassa guianensis ethanol extract used as sustainable eco-friendly inhibitor for zinc corrosion in 3% NaCl: Electrochemical and XPS studies, M. Lebrini, F. Suedile, P. Salvin, C. Roos, A. Zarrouk, c. Jama, F. Bentiss, Surfaces and Interfaces, 2020, 100588, doi:10.1016/j.surfin.2020.100588
Thermoelectric properties of bulk multi-walled carbon nanotube - poly(vinylidene fluoride) nanocomposites: Study of the structure/property relationships, J.-F. Brun, C. Binet, J.-F. Tahon, A. Addad, P. TRANCHARD, S. Barrau, Synthetic Metals, 2020, 116525, doi:10.1016/j.synthmet.2020.116525
A Case Study of Polyether Ether Ketone (I): Investigating the Thermal and Fire Behavior of a High-Performance Material, A. Ramgobin, G. Fontaine, S. Bourbigot, Polymers, 2020, 12;8, 1789, doi:10.3390/polym12081789
Oxygen concentration and modeling thermal decomposition of a high‐performance material: A case study of polyimide (Cirlex), A. Ramgobin, G. Fontaine, S. Bourbigot, Polymers for Advanced Technologies, 2020, doi:10.1002/pat.5060
Influence of two kinds of low dimensional nano-sized silicate clay on the flame retardancy of polypropylene, W. Tang, Z. Qin, F. Liu, S. Gong, C. Peng, X. Gu, S. Zhang, X. Wang, X. Jin, S. Bourbigot, Materials Chemistry and Physics, 2020, 256, 123743, doi:10.1016/j.matchemphys.2020.123743
Release-killing properties of a textile modified by a layer-by-layer coating based on two oppositely charged cyclodextrin polyelectrolytes, J. Junthip, N. Tabary, M. Maton, S. Ouerghemmi, J.-N. Staelens, F. Cazaux, C. Neut, N. Blanchemain, B. Martel, International Journal of Pharmaceutics, 2020, 587, 119730, doi:10.1016/j.ijpharm.2020.119730
Intumescent polypropylene in extreme fire conditions, S. Bourbigot, J. Sarazin, T. Bensabath, Fire Safety Journal, 2020, 103082, doi:10.1016/j.firesaf.2020.103082
3D printed sandwich materials filled with hydrogels for extremely low heat release rate, L. Geoffroy, A.-L. Davesne, S. Bellayer, F. Blanchard, E. Richard, F. Samyn, M. Jimenez, S. Bourbigot, Polymer Degradation and Stability, 2020, 179, 109269, doi:10.1016/j.polymdegradstab.2020.109269
Experimental studies and computational exploration on the 2-amino-5-(2-methoxyphenyl)-1,3,4-thiadiazole as novel corrosion inhibitor for mild steel in acidic environment, A. Attou, M. Tourabi, A. Benikdes, O. Benali, H. Ouici, F. Benhiba, A. Zarrouk, c. Jama, F. Bentiss, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2020, 125320, doi:10.1016/j.colsurfa.2020.125320
An experimental-coupled empirical investigation on the corrosion inhibitory action of 7-alkyl-8-Hydroxyquinolines on C35E steel in HCl electrolyte, M. El Faydy, F. Benhiba, A. Berisha, Y. Kerroum, C. Jama, B. Lakhrissi, A. Guenbour, I. Warad, A. Zarrouk, Journal of Molecular Liquids, 2020, 113973, doi:10.1016/j.molliq.2020.113973
A Case Study of Polyetheretherketone (II): Playing with Oxygen Concentration and Modeling Thermal Decomposition of a High-Performance Material, A. Ramgobin, G. Fontaine, S. Bourbigot, Polymers, 2020, 12;7, 1577, doi:10.3390/polym12071577
2-Amino-1-(4-aminophenyl)-1H-pyrrolo(2,3-b)quinoxaline-3- carbonitrile as an efficient inhibitor for the corrosion of C38 steel in hydrochloric acid solution, M. Lebrini, W. Benkayba, c. Jama, F. Bentiss, C. Roos, International Journal of Electrochemical Science, 2020, 2326-2334, doi:10.20964/2020.03.46
Synthesis and characterization of novel Cu (II) and Zn (II) complexes of 5-{[(2-Hydroxyethyl) sulfanyl] methyl}-8-hydroxyquinoline as effective acid corrosion inhibitor by experimental and computational testings, M. Rbaa, F. Benhiba, M. Galai, A.S. Abousalem, M. Ouakki, C.-H. Lai, B. Lakhrissi, c. Jama, I. Warad, M. Ebn Touhami, A. Zarrouk, Chemical Physics Letters, 2020, 137771, doi:10.1016/j.cplett.2020.137771
Rationalizing the Reactivity of Mixed Allyl Rare-Earth Borohydride Complexes with DFT Studies, S. Fadlallah, J. Jothieswaran, I. Del Rosal, L. Maron, F. Bonnet, M. Visseaux, Catalysts, 2020, 10, 820, doi:10.3390/catal10080820
Simple preparation and characterization of novel 8-Hydroxyquinoline derivatives as effective acid corrosion inhibitor for mild steel: Experimental and theoretical studies, M. Rbaa, M. Ouakki, M. Galai, A. Berisha, B. Lakhrissi, c. Jama, I. Warad, A. Zarrouk, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2020, 125094, doi:10.1016/j.colsurfa.2020.125094
Electrochemical, surface and computational studies on the inhibition performance of some newly synthesized 8-hydroxyquinoline derivatives containing benzimidazole moiety against the corrosion of carbon steel in phosphoric acid environment, M. El Faydy, B. Lakhrissi, c. Jama, A. Zarrouk, L.O. Olasunkanmi, E.E. Ebenso, F. Bentiss, Journal of Materials Research and Technology, 2020, 9;1, 727-748, doi:10.1016/j.jmrt.2019.11.014
Essential Oil of Salvia officinalis as Novel Eco-Friendly Inhibitor for Carbon Steel in HCl Solution: Weight Loss, Electrochemical and XPS Studies, H. Bourazmi, M. Rbaa, R. Benkaddour, F. Bentiss, c. Jama, J. Costa, M. Tabyaoui, A. Zarrouk, Protection of Metals and Physical Chemistry of Surfaces, 2020, 56;2, 438-449, doi:10.1134/s2070205120020045
Cost-effective non-noble metal supported on conducting polymer composite such as nickel nanoparticles/polypyrrole as efficient anode electrocatalyst for ethanol oxidation, S. Chemchoub, L. Oularbi, A. El Attar, S.A. Younssi, F. Bentiss, c. Jama, M. El Rhazi, Materials Chemistry and Physics, 2020, 123009, doi:10.1016/j.matchemphys.2020.123009
Formulation of eco-friendly sol–gel coatings to flame-retard flexible polyurethane foam, S. Bellayer, M. Jimenez, S. Barrau, A. Marin, J. Sarazin, S. Bourbigot, Green materials, 2020, 1-11, doi:10.1680/jgrma.19.00059
Immobilisation of an anti-platelet adhesion and anti-thrombotic drug (EP224283) on polydopamine coated vascular stent promoting anti-thrombogenic properties, N. Bricout, F. Chai, J. Sobocinski, A. Hertault, W. Laure, A. Ung, P. Woisel, J. Lyskawa, N. Blanchemain, Materials Science and Engineering: C, 2020, 110967, doi:10.1016/j.msec.2020.110967
Synthesis of novel catalytic composite nanofibers containing ruthenium nanoparticles stabilized by a citric acid-β-cyclodextrin polymer, S. Fadlallah, N. Tabary, S. Noel, B. Leger, F. Cazaux, E. Monflier, B. Martel, Nanoscale Advances, 2020, 2;5, 2087-2098, doi:10.1039/c9na00791a
Stent coating by electrospinning with chitosan/poly-cyclodextrin based nanofibers loaded with simvastatin for restenosis prevention, D. Kersani, J. Mougin, M. Lopez, S. Degoutin, N. Tabary, F. Cazaux, L. Janus, M. Maton, F. Chai, J. Sobocinski, N. Blanchemain, B. Martel, European Journal of Pharmaceutics and Biopharmaceutics, 2020, 150, 156-167, doi:10.1016/j.ejpb.2019.12.017
Bilayer Intumescent Paint Metal Laminates: A Novel Design for a High-Performance Fire Barrier, L. Geoffroy, F. Samyn, M. Jimenez, S. Bourbigot, Industrial & Engineering Chemistry Research, 2020, 59;7, 2988-2997, doi:10.1021/acs.iecr.9b06345
Improving the flame retardant properties of polyester-cotton blend fabrics by introducing an intumescent coating via layer by layer assembly, X. Liu, X. Meng, J. Sun, W. Tang, S. Chen, X. Peng, X. Gu, B. Fei, S. Bourbigot, S. Zhang, Journal of Applied Polymer Science, 2020, 49253, doi:10.1002/app.49253
Development of a pyrolysis model for an intumescent flame retardant system: Poly(lactic acid) blended with melamine and ammonium polyphosphate, Q. Sun, Y. Ding, S.I. Stoliarov, J. Sun, G. Fontaine, S. Bourbigot, Composites Part B: Engineering, 2020, 108055, doi:10.1016/j.compositesb.2020.108055
Lignin-derived bio-based flame retardants toward high-performance sustainable polymeric materials, H. Yang, B. Yu, X. Xu, S. Bourbigot, H. Wang, P. Song, Green Chemistry, 2020, 22;7, 2129-2161, doi:10.1039/d0gc00449a
Dual Responsive Regulation of Host–Guest Complexation in Aqueous Media to Control Partial Release of the Host, H. Guo, D. Hourdet, A. Marcellan, F. Stoffelbach, J. Lyskawa, L. De Smet, A. Vebr, R. Hoogenboom, P. Woisel, Chemistry - A European Journal, 2020, 26;6, 1292-1297, doi:10.1002/chem.201904287
Synthesis of lead-free (Bi0,5Na0,5)TiO3 thin film by RF magnetron sputtering: Impact of Na on the properties of film, A. Hamieh, F. Ponchel, S. Barrau, D. Remiens, Ferroelectrics, 2020, 556;1, 79-86, doi:10.1080/00150193.2020.1713345
Mechanistic insights on ultra-tough polylactide-based ionic nanocomposites, J.-E. Potaufeux, J. Odent, D. Notta-Cuvier, R. Delille, S. Barrau, E.P. Giannelis, F. Lauro, J.-M. Raquez, Composites Science and Technology, 2020, 108075, doi:10.1016/j.compscitech.2020.108075
On the Nanoscale Mapping of the Mechanical and Piezoelectric Properties of Poly (L-Lactic Acid) Electrospun Nanofibers, C. Nguyen Thai, S. Barrau, M. Dufay, N. Tabary, A. Da Costa, A. Ferri, R. Lazzaroni, J.-M. Raquez, P. Leclere, Applied Sciences, 2020, 10;2, 652, doi:10.3390/app10020652
Biodegradable PLA/PBS multinanolayer membrane with enhanced barrier performances, T. Messin, S. Marais, N. Follain, A. Guinault, V. Gaucher, N. Delpouve, C. Sollogoub, Journal of Membrane Science, 2020, 117777, doi:10.1016/j.memsci.2019.117777
The flammability and mechanical properties of poly (lactic acid) composites containing Ni-MOF nanosheets with polyhydroxy groups, X. Wang, S. Wang, W. Wang, H. Li, X. Liu, X. Gu, S. Bourbigot, Z. Wang, J. Sun, S. Zhang, Composites Part B: Engineering, 2020, 107568, doi:10.1016/j.compositesb.2019.107568
Titanium and iron modified delaminated muscovite as photocatalyst for enhanced degradation of Tetrabromobisphenol A by visible light, N. Touaa, Z. Bouberka, C.-E. Gherdaoui, P. Supiot, P. Roussel, C. Pierlot, U. Maschke, Functional Materials Letters, 2020, 13;03, 2051008, doi:10.1142/S179360472051008X
Probing the local piezoelectric behavior in stretched barium titanate/poly(vinylidene fluoride) nanocomposites, A. Ferri, S. Barrau, R. Bourez, A. Da Costa, M.-H. Chambrier, A. Marin, J. Defebvin, J.-M. Lefebvre, R. Desfeux, COMPOSITES SCIENCE AND TECHNOLOGY, 2020, 107914, doi:10.1016/j.compscitech.2019.107914
Novel hybrid poly(l-lactic acid) from titanium oxo-cluster via reactive extrusion polymerization, E. Louisy, S. Bellayer, G. Fontaine, L. Rozes, F. Bonnet, European Polymer Journal, 2020, 122, 109238, doi:10.1016/j.eurpolymj.2019.109238
Life cycle assessment of multi-step versus one-step coating processes using oil or bio-based resins, C. Lemesle, J. Frémiot, A. Beaugendre, M. Casetta, S. Bellayer, S. Duquesne, A.-S. Schuller, M. Jimenez, Journal of Cleaner Production, 2020, 242, 118527, doi:10.1016/j.jclepro.2019.118527