Français - English - Intranet
Unité Matériaux et Transformations empty space

Unité Matériaux et Transformations
CNRS UMR 8207 - Université de Lille

UMET - Ingénierie des Systèmes Polymères

Ingénierie des Systèmes Polymères - Publications

2024 - 2023 - 2022 - 2021 - 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010

Format: standard -- liste HAL

Les publications de l'équipe dans LillOA (Lille Open Archive)

Publications dans des revues internationales

  1. S. Fernandes Nassar, N. Delpouve, C. Sollogoub, A. Guinault, G. Stoclet, G. Régnier, S. Domenek, Impact of Nanoconfinement on Polylactide Crystallization and Gas Barrier Properties, ACS Applied Materials & Interfaces 12;8, 9953-9965 (2020), [doi: 10.1021/acsami.9b21391, LillOA]
  2. A. De Neef, C. Samuel, H. Amorín, G. Stoclet, R. Jiménez, P. Dubois, J. Soulestin, J.-M. Raquez, Beta Phase Crystallization and Ferro- and Piezoelectric Performances of Melt-Processed Poly(vinylidene difluoride) Blends with Poly(methyl methacrylate) Copolymers Containing Ionizable Moieties, ACS Applied Polymer Materials 2;9, 3766-3780 (2020), [doi: 10.1021/acsapm.0c00351, LillOA]
  3. O. Oguz, N. Candau, A. Demongeot, M.K. Citak, F.N. Cetin, G. Stoclet, V. Michaud, Y.Z. Menceloglu, Poly(lactide)/cellulose nanocrystal nanocomposites by high‐shear mixing, Polymer Engineering & Science 61;4, 1028-1040 (2020), [doi: 10.1002/pen.25621, LillOA]
  4. F. Samyn, O. Murariu, L. Bonnaud, S. Duquesne, Preparation and flame retardancy of flax fabric/polybenzoxazine laminates, Fire and Materials 45;3, 366-378 (2020), [doi: 10.1002/fam.2839, LillOA]
  5. M.N.D. Cherief, F. Zairi, N. Ding, J.-M. Gloaguen, M. Nait-Abdelaziz, M. Benguediab, Plasticity and thermally-induced recovery in polycarbonate, Mechanics of materials . an international journal 148, (2020), [doi: 10.1016/j.mechmat.2020.103515, LillOA]
  6. A. Dinari, M. Chaabane, T. Benameur, Q. Guo, J.-M. Gloaguen, F. Zairi, Multiscale observation of the fatigue-induced damage mechanisms in carbon-black filled styrene-butadiene rubber, Macromolecular Materials and Engineering -, (2020), [doi: 10.1002/mame.202000227, LillOA]
  7. A.-L. Davesne, T. Perez, J. Sarazin, S. Bellayer, F. Parent, F. Samyn, M. Jimenez, F. Sanchette, Low-Emissivity Metal/Dielectric Coatings as Radiative Barriers for the Fire Protection of Raw and Formulated Polymers, ACS Applied Polymer Materials 2;7, 2880-2889 (2020), [doi: 10.1021/acsapm.0c00399, LillOA]
  8. M. Dufaye, S. Duval, G. Stoclet, D. Mara, R. Van Deun, T. Loiseau, Synthesis and structural characterization of lanthanide-containing polytungsto-antimonate [{sb-3(mu(3)-o)(2)ln(h2o)ln(h2o)(2)}(2)(sbw10o37)(2)(sbw8o31)(2)](22)(-)molecules deriving from the decomposition of the [sb8w36o132](24)(-)macroanion, European journal of inorganic chemistry (2020), [doi: 10.1002/ejic.202000613, LillOA]
  9. R. Mundil, F. Kayser, A. Huret, G. Stoclet, P. Zinck, F. Kayser, Organocatalytic sequential ring-opening polymerization of a cyclic ester and anionic polymerization of a vinyl monomer, Chemical communications (Cambridge, England) 58, (2020), [doi: 10.1039/d0cc02906h, LillOA]
  10. M. Dufaye, S. Duval, G. Stoclet, T. Loiseau, Influence of ph on ce-iv-[(asw9o33)-w-iii](9-) association for the formation of hexanuclear cerium(iv) oxo-hydroxo-clusters stabilized by trivacant polyanions, Crystengcomm 22, 371-380 (2020), [doi: 10.1039/c9ce01663e, LillOA]
  11. T. Perez, J. Sarazin, S. Bourbigot, Anisotropy of expandable graphite to explain its behavior as a flame-retardant, Journal of Fire Sciences 39;2, 109-118 (2020), [doi: 10.1177/0734904120969639, LillOA]
  12. Z. Hadjou Belaid, L. Benhabib, D. Beroguiaa, F. Abdoune, L. Méchernène, U. Maschke, Thermal study of photopolymerization reaction in polyacrylate/liquid crystal blends, Materials Today: Proceedings 31;Supplement 1, S9-S11 (2020), [doi: 10.1016/j.matpr.2020.05.026, LillOA]
  13. F. Nonque, A. Sahut, N. Jacquel, R. Saint-Loup, P. Woisel, J. Potier, Isosorbide monoacrylate: a sustainable monomer for the production of fully bio-based polyacrylates and thermosets, Polymer Chemistry 11;43, 6903-6909 (2020), [doi: 10.1039/d0py00957a, LillOA]
  14. H.L. Boudjema, H. Bendaikha, U. Maschke, Green composites based on Atriplex halimus fibers and PLA matrix, Journal of Polymer Engineering 40;8, 693-702 (2020), [doi: 10.1515/polyeng-2020-0068, LillOA]
  15. G. Bai, J.-C. Hornez, U. Maschke, P. Supiot, E. Bres, Modification of hydroxyapatite surface properties by electron irradiation, Radiation Physics and Chemistry 177, 109192 (2020), [doi: 10.1016/j.radphyschem.2020.109192, LillOA]
  16. S. Bedjaoui, L. Bedjaoui, M.-E.-A. Benbekeda, F. Dubois, D. Merah, P. Supiot, C. Foissac, U. Maschke, Unusual swelling of acrylate based crosslinked polymer networks in linear primary alcohols: Experimental and modeling aspects, Journal of Molecular Liquids 320;Part B, 114459 (2020), [doi: 10.1016/j.molliq.2020.114459, LillOA]
  17. H. Aldoori, Z. Bouberka, A. Nadim, Y. Agguine, S. Eddarir, P. Supiot, C. Foissac, U. Maschke, Photodegradation of Decabromo Diphenyl Ether Flame Retardant in Poly (Acrylonitrile Butadiene Styrene) (ABS), Journal of Macromolecular Science Part B Physics 59;10, 609-620 (2020), [doi: 10.1080/00222348.2020.1763607, LillOA]
  18. K.E. Boudraa, T. Bouchaour, C. Beyens, U. Maschke, Novel interpenetrating polymer network composed of poly(butyl acrylates) and poly(ethyl-hexyl acrylate), International Journal of Polymer Analysis and Characterization 25;1, 18-33 (2020), [doi: 10.1080/1023666x.2020.1737467, LillOA]
  19. K. Li, Y. Zou, S. Bourbigot, J. Ji, X. Chen, Pressure effects on morphology of isotropic char layer, shrinkage, cracking and reduced heat transfer of wooden material, Proceedings of the Combustion Institute (2020), [doi: 10.1016/j.proci.2020.07.072, LillOA]
  20. F. Bonnet, P. Zinck, Vers des polyesters biosourcés et recyclables, Actualite Chimique 456-458, 31-36 (2020), [LillOA]
  21. L. Duchatel-Crépy, N. Joly, P. Martin, A. Marin, J.-F. Tahon, J.-M. Lefebvre, V. Gaucher, Substitution degree and fatty chain length influence on structure and properties of fatty acid cellulose esters, Carbohydrate Polymers 234, 115912 (2020), [doi: 10.1016/j.carbpol.2020.115912, LillOA]
  22. S. Xu, J.-F. Tahon, I. De Waele, G. Stoclet, V. Gaucher, Brittle-to-ductile transition of PLA induced by macromolecular orientation, Express Polymer Letters 14;11, 1034-1047 (2020), [doi: 10.3144/expresspolymlett.2020.84, LillOA]
  23. L. Geoffroy, A.-L. Davesne, F. Parent, F. Sanchette, F. Solarski, M. Jimenez, S. Bourbigot, Combining Low-Emissivity Thin Coating and 3D-Printed Original Designs for Superior Fire-Protective Performance, ACS Omega 5;43, 27857–27863 (2020), [doi: 10.1021/acsomega.0c02902, LillOA]
  24. B. Malfait, N. T. Correia, C. Ciotonea, J. Dhainaut, J.-P. Dacquin, s. royer, N. Tabary, Y. Guinet, A. Hedoux, Manipulating the physical states of confined ibuprofen in SBA-15 based drug delivery systems obtained by solid-state loading: Impact of the loading degree, The Journal of Chemical Physics 153;15, 154506 (2020), [doi: 10.1063/5.0020992, LillOA]
  25. Z. Belattmania, S. Kaidi, S. El Atouani, C. Katif, F. Bentiss, c. Jama, A. Reani, B. Sabour, V. Vasconcelos, Isolation and FTIR-ATR and 1H NMR Characterization of Alginates from the Main Alginophyte Species of the Atlantic Coast of Morocco, Molecules 25;18, 4335 (2020), [doi: 10.3390/molecules25184335, LillOA]
  26. S. Klaimy, C. Ciotonea, J. Dhainaut, s. royer, M. Casetta, S. Duquesne, G. Tricot, J.-F. Lamonier, Flash Catalytic Pyrolysis of Polyethylene over (Alumino)silicate Materials, ChemCatChem 12;4, 1109-1116 (2020), [doi: 10.1002/cctc.201901819, LillOA]
  27. M. Lebrini, F. Suedile, P. Salvin, C. Roos, A. Zarrouk, c. Jama, F. Bentiss, Bagassa guianensis ethanol extract used as sustainable eco-friendly inhibitor for zinc corrosion in 3% NaCl: Electrochemical and XPS studies, Surfaces and Interfaces 100588 (2020), [doi: 10.1016/j.surfin.2020.100588, LillOA]
  28. J.-F. Brun, C. Binet, J.-F. Tahon, A. Addad, P. TRANCHARD, S. Barrau, Thermoelectric properties of bulk multi-walled carbon nanotube - poly(vinylidene fluoride) nanocomposites: Study of the structure/property relationships, Synthetic Metals 116525 (2020), [doi: 10.1016/j.synthmet.2020.116525, LillOA]
  29. A. Ramgobin, G. Fontaine, S. Bourbigot, A Case Study of Polyether Ether Ketone (I): Investigating the Thermal and Fire Behavior of a High-Performance Material, Polymers 12;8, 1789 (2020), [doi: 10.3390/polym12081789, LillOA]
  30. A. Ramgobin, G. Fontaine, S. Bourbigot, Oxygen concentration and modeling thermal decomposition of a high‐performance material: A case study of polyimide (Cirlex), Polymers for Advanced Technologies (2020), [doi: 10.1002/pat.5060, LillOA]
  31. W. Tang, Z. Qin, F. Liu, S. Gong, C. Peng, X. Gu, S. Zhang, X. Wang, X. Jin, S. Bourbigot, Influence of two kinds of low dimensional nano-sized silicate clay on the flame retardancy of polypropylene, Materials Chemistry and Physics 256, 123743 (2020), [doi: 10.1016/j.matchemphys.2020.123743, LillOA]
  32. J. Junthip, N. Tabary, M. Maton, S. Ouerghemmi, J.-N. STAELENS, F. Cazaux, C. Neut, N. Blanchemain, B. Martel, Release-killing properties of a textile modified by a layer-by-layer coating based on two oppositely charged cyclodextrin polyelectrolytes, International Journal of Pharmaceutics 587, 119730 (2020), [doi: 10.1016/j.ijpharm.2020.119730, LillOA]
  33. S. Bourbigot, J. Sarazin, T. Perez, Intumescent polypropylene in extreme fire conditions, Fire Safety Journal 103082 (2020), [doi: 10.1016/j.firesaf.2020.103082, LillOA]
  34. L. Geoffroy, A.-L. Davesne, S. Bellayer, F. Blanchard, E. Richard, F. Samyn, M. Jimenez, S. Bourbigot, 3D printed sandwich materials filled with hydrogels for extremely low heat release rate, Polymer Degradation and Stability 179, 109269 (2020), [doi: 10.1016/j.polymdegradstab.2020.109269, LillOA]
  35. A. Attou, M. Tourabi, A. Benikdes, O. Benali, H. Ouici, F. Benhiba, A. Zarrouk, c. Jama, F. Bentiss, Experimental studies and computational exploration on the 2-amino-5-(2-methoxyphenyl)-1,3,4-thiadiazole as novel corrosion inhibitor for mild steel in acidic environment, Colloids and Surfaces A: Physicochemical and Engineering Aspects 125320 (2020), [doi: 10.1016/j.colsurfa.2020.125320, LillOA]
  36. M. El Faydy, F. Benhiba, A. Berisha, Y. Kerroum, c. Jama, B. Lakhrissi, A. Guenbour, I. Warad, A. Zarrouk, An experimental-coupled empirical investigation on the corrosion inhibitory action of 7-alkyl-8-Hydroxyquinolines on C35E steel in HCl electrolyte, Journal of Molecular Liquids 113973 (2020), [doi: 10.1016/j.molliq.2020.113973, LillOA]
  37. A. Ramgobin, G. Fontaine, S. Bourbigot, A Case Study of Polyetheretherketone (II): Playing with Oxygen Concentration and Modeling Thermal Decomposition of a High-Performance Material, Polymers 12;7, 1577 (2020), [doi: 10.3390/polym12071577, LillOA]
  38. M. Lebrini, W. Benkayba, c. Jama, F. Bentiss, C. Roos, 2-Amino-1-(4-aminophenyl)-1H-pyrrolo(2,3-b)quinoxaline-3- carbonitrile as an efficient inhibitor for the corrosion of C38 steel in hydrochloric acid solution, International Journal of Electrochemical Science 2326-2334 (2020), [doi: 10.20964/2020.03.46, LillOA]
  39. M. Rbaa, F. Benhiba, M. Galai, A.S. Abousalem, M. Ouakki, C.-H. Lai, B. Lakhrissi, c. Jama, I. Warad, M. Ebn Touhami, A. Zarrouk, Synthesis and characterization of novel Cu (II) and Zn (II) complexes of 5-{[(2-Hydroxyethyl) sulfanyl] methyl}-8-hydroxyquinoline as effective acid corrosion inhibitor by experimental and computational testings, Chemical Physics Letters 137771 (2020), [doi: 10.1016/j.cplett.2020.137771, LillOA]
  40. S. Fadlallah, J. Jothieswaran, I. Del Rosal, L. Maron, F. Bonnet, M. Visseaux, Rationalizing the Reactivity of Mixed Allyl Rare-Earth Borohydride Complexes with DFT Studies, Catalysts 10, 820 (2020), [doi: 10.3390/catal10080820, LillOA]
  41. M. Rbaa, M. Ouakki, M. Galai, A. Berisha, B. Lakhrissi, c. Jama, I. Warad, A. Zarrouk, Simple preparation and characterization of novel 8-Hydroxyquinoline derivatives as effective acid corrosion inhibitor for mild steel: Experimental and theoretical studies, Colloids and Surfaces A: Physicochemical and Engineering Aspects 125094 (2020), [doi: 10.1016/j.colsurfa.2020.125094, LillOA]
  42. M. El Faydy, B. Lakhrissi, c. Jama, A. Zarrouk, L.O. Olasunkanmi, E.E. Ebenso, F. Bentiss, Electrochemical, surface and computational studies on the inhibition performance of some newly synthesized 8-hydroxyquinoline derivatives containing benzimidazole moiety against the corrosion of carbon steel in phosphoric acid environment, Journal of Materials Research and Technology 9;1, 727-748 (2020), [doi: 10.1016/j.jmrt.2019.11.014, LillOA]
  43. H. Bourazmi, M. Rbaa, R. Benkaddour, F. Bentiss, c. Jama, J. Costa, M. Tabyaoui, A. Zarrouk, Essential Oil of Salvia officinalis as Novel Eco-Friendly Inhibitor for Carbon Steel in HCl Solution: Weight Loss, Electrochemical and XPS Studies, Protection of Metals and Physical Chemistry of Surfaces 56;2, 438-449 (2020), [doi: 10.1134/s2070205120020045, LillOA]
  44. S. Chemchoub, L. Oularbi, A. El Attar, S.A. Younssi, F. Bentiss, c. Jama, M. El Rhazi, Cost-effective non-noble metal supported on conducting polymer composite such as nickel nanoparticles/polypyrrole as efficient anode electrocatalyst for ethanol oxidation, Materials Chemistry and Physics 123009 (2020), [doi: 10.1016/j.matchemphys.2020.123009, LillOA]
  45. S. Bellayer, M. Jimenez, S. Barrau, A. Marin, J. Sarazin, S. Bourbigot, Formulation of eco-friendly sol–gel coatings to flame-retard flexible polyurethane foam, Green materials 1-11 (2020), [doi: 10.1680/jgrma.19.00059, LillOA]
  46. N. Bricout, F. Chai, J. Sobocinski, A. Hertault, W. Laure, A. Ung, P. Woisel, J. Lyskawa, N. Blanchemain, Immobilisation of an anti-platelet adhesion and anti-thrombotic drug (EP224283) on polydopamine coated vascular stent promoting anti-thrombogenic properties, Materials Science and Engineering: C 110967 (2020), [doi: 10.1016/j.msec.2020.110967, LillOA]
  47. S. Fadlallah, N. Tabary, S. Noel, B. Leger, F. Cazaux, E. Monflier, B. Martel, Synthesis of novel catalytic composite nanofibers containing ruthenium nanoparticles stabilized by a citric acid-β-cyclodextrin polymer, Nanoscale Advances 2;5, 2087-2098 (2020), [doi: 10.1039/c9na00791a, LillOA]
  48. D. Kersani, J. Mougin, M. Lopez, S. Degoutin, N. Tabary, F. Cazaux, L. Janus, M. Maton, F. Chai, J. Sobocinski, N. Blanchemain, B. Martel, Stent coating by electrospinning with chitosan/poly-cyclodextrin based nanofibers loaded with simvastatin for restenosis prevention, European Journal of Pharmaceutics and Biopharmaceutics 150, 156-167 (2020), [doi: 10.1016/j.ejpb.2019.12.017, LillOA]
  49. L. Geoffroy, F. Samyn, M. Jimenez, S. Bourbigot, Bilayer Intumescent Paint Metal Laminates: A Novel Design for a High-Performance Fire Barrier, Industrial & Engineering Chemistry Research 59;7, 2988-2997 (2020), [doi: 10.1021/acs.iecr.9b06345, LillOA]
  50. X. Liu, X. Meng, J. Sun, W. Tang, S. Chen, X. Peng, X. Gu, B. Fei, S. Bourbigot, S. Zhang, Improving the flame retardant properties of polyester-cotton blend fabrics by introducing an intumescent coating via layer by layer assembly, Journal of Applied Polymer Science 49253 (2020), [doi: 10.1002/app.49253, LillOA]
  51. Q. Sun, Y. Ding, S.I. Stoliarov, J. Sun, G. Fontaine, S. Bourbigot, Development of a pyrolysis model for an intumescent flame retardant system: Poly(lactic acid) blended with melamine and ammonium polyphosphate, Composites Part B: Engineering 108055 (2020), [doi: 10.1016/j.compositesb.2020.108055, LillOA]
  52. H. Yang, B. Yu, X. Xu, S. Bourbigot, H. Wang, P. Song, Lignin-derived bio-based flame retardants toward high-performance sustainable polymeric materials, Green Chemistry 22;7, 2129-2161 (2020), [doi: 10.1039/d0gc00449a, LillOA]
  53. H. Guo, D. Hourdet, A. Marcellan, F. Stoffelbach, J. Lyskawa, L. De Smet, A. Vebr, R. Hoogenboom, P. Woisel, Dual Responsive Regulation of Host–Guest Complexation in Aqueous Media to Control Partial Release of the Host, Chemistry - A European Journal 26;6, 1292-1297 (2020), [doi: 10.1002/chem.201904287, LillOA]
  54. A. Hamieh, F. Ponchel, S. Barrau, D. Remiens, Synthesis of lead-free (Bi0,5Na0,5)TiO3 thin film by RF magnetron sputtering: Impact of Na on the properties of film, Ferroelectrics 556;1, 79-86 (2020), [doi: 10.1080/00150193.2020.1713345, LillOA]
  55. J.-E. Potaufeux, J. Odent, D. Notta-Cuvier, R. Delille, S. Barrau, E.P. Giannelis, F. Lauro, J.-M. Raquez, Mechanistic insights on ultra-tough polylactide-based ionic nanocomposites, Composites Science and Technology 108075 (2020), [doi: 10.1016/j.compscitech.2020.108075, LillOA]
  56. C. Nguyen Thai, S. Barrau, M. Dufay, N. Tabary, A. Da Costa, A. Ferri, R. Lazzaroni, J.-M. Raquez, P. Leclere, On the Nanoscale Mapping of the Mechanical and Piezoelectric Properties of Poly (L-Lactic Acid) Electrospun Nanofibers, Applied Sciences 10;2, 652 (2020), [doi: 10.3390/app10020652, LillOA]
  57. T. Messin, S. Marais, N. Follain, A. Guinault, V. Gaucher, N. Delpouve, C. Sollogoub, Biodegradable PLA/PBS multinanolayer membrane with enhanced barrier performances, Journal of Membrane Science 117777 (2020), [doi: 10.1016/j.memsci.2019.117777, LillOA]
  58. X. Wang, S. Wang, W. Wang, H. Li, X. Liu, X. Gu, S. Bourbigot, Z. Wang, J. Sun, S. Zhang, The flammability and mechanical properties of poly (lactic acid) composites containing Ni-MOF nanosheets with polyhydroxy groups, Composites Part B: Engineering 107568 (2020), [doi: 10.1016/j.compositesb.2019.107568, LillOA]
  59. N. Touaa, Z. Bouberka, C.-E. Gherdaoui, P. Supiot, P. Roussel, C. Pierlot, U. Maschke, Titanium and iron modified delaminated muscovite as photocatalyst for enhanced degradation of Tetrabromobisphenol A by visible light, Functional Materials Letters 13;03, 2051008 (2020), [doi: 10.1142/S179360472051008X, LillOA]
  60. A. Ferri, S. Barrau, R. Bourez, A. Da Costa, M.-H. Chambrier, A. Marin, J. Defebvin, J.-M. Lefebvre, R. Desfeux, Probing the local piezoelectric behavior in stretched barium titanate/poly(vinylidene fluoride) nanocomposites, COMPOSITES SCIENCE AND TECHNOLOGY 107914 (2020), [doi: 10.1016/j.compscitech.2019.107914, LillOA]
  61. E. Louisy, S. Bellayer, G. Fontaine, L. Rozes, F. Bonnet, Novel hybrid poly(l-lactic acid) from titanium oxo-cluster via reactive extrusion polymerization, European Polymer Journal 122, 109238 (2020), [doi: 10.1016/j.eurpolymj.2019.109238, LillOA]
  62. C. Lemesle, J. Frémiot, A. Beaugendre, M. Casetta, S. Bellayer, S. Duquesne, A.-S. Schuller, M. Jimenez, Life cycle assessment of multi-step versus one-step coating processes using oil or bio-based resins, Journal of Cleaner Production 242, 118527 (2020), [doi: 10.1016/j.jclepro.2019.118527, LillOA]
UMET - Unité Matériaux et Transformations
Université de Lille
Bâtiment C6
59655 Villeneuve d'Ascq
Version 3.0
Mentions Légales - Contacter le webmaster