Jérémie BOUQUEREL

Associate Professor

Bâtiment C6 - bureau 225 - 2è Etage
Unité Matériaux et Transformations
Cité scientifique, Bât. C6
Université de Lille
59655 Villeneuve d'Ascq
France
Tel: +33 (0) 320 43 42 29
Fax: +33 (0) 320 43 65 91
Email : Send an email to Jérémie BOUQUEREL
ORCID Identifier : 0000-0002-0254-0022

Research team: Métallurgie physique et génie des matériaux

Research

Study of the local plastic deformation of metallic materials by means of EBSD analyses.

Teaching

Metallurgy,

Microscopy and other analysis methods, Mechanical analysis, Python and Scilab programming

Current PhD thesis

• Ana Clara AMADO DOLABELLA, Compréhension des mécanismes d'endommagement de joints soudés FSW en alliage Al-Cu-Li 2198 . Thesis started in 2023. Other co-advisor: Marie-Noëlle Avettand-Fénoël.
• Renata DE OLIVEIRA MELO, Étude de la relation entre les microstructures complexes et les propriétés de rupture de l’acier inoxydable. Thesis started in 2023. Other co-advisor: Gang JI.

Defended PhD thesis

• Laïs AVILA DE OLIVEIRA SILVA, The effect of microstructural gradients generated during patenting on their final mechanical properties . Thesis defended in 2022. Other co-advisor: Jean-Bernard VOGT.
• Mahira Adna COTA ARAUJO, Critère d'amorçage de micro fissure de fatigue dans des aciers inoxydables . Thesis defended in 2021. Other co-advisor: Jean-Bernard VOGT. Position: Inégnieur Produit à Villares Metals (Brésil).
• Isadora COSTA, Relations between the magnetic properties ans the microstructure of wires after thermal and mechanical treatments . Thesis defended in 2020. Other co-advisor: Jean-Bernard VOGT. Position: Ingénieure de Recherche Process et Produits chez CBMM.
• Julie GODON, Influence of steel cleanliness on the processability during wet wire drawing process of hyper entectoid steel for ultra high tensite strength . Thesis defended in 2020. Other co-advisor: Jean-Bernard VOGT.
• Claire Schayes, Low cycle fatigue of the Fe-3Si steel: damage mechanisms and strain localisation by EBSD. Thesis defended in 2016. Other co-advisor: Jean-Bernard VOGT. Position: Ingénieur Méthodes Soudage, Valeo.

Latest scientific contributions in LillOA (Lille Open Archive)

Publications

21. J. Růžička, A. Alıcıoğlu, J. Bouquerel, P. Novák, J.-B. Vogt, Assessment of Microstructural Features of a Silchrome 1 Exhaust Valve of a Harley-Davidson WLA World War II Motorcycle, Materials 17;16, 4156 (2024), [doi: 10.3390/ma17164156, LillOA]
20. M.-A. Cota Araujo, J.-M. Olive, G. Pecastaings, A. Addad, J. Bouquerel, J.-B. Vogt, Compelling Evidence for the Role of Retained Austenite in the Formation of Low Cycle Fatigue Extrusions in a 9Ni Steel, Metals 13;3, 546 (2023), [doi: 10.3390/met13030546, LillOA]
19. A. SRIBA, J. Bouquerel, J.-B. Vogt, DIC‑aided analysis of the fatigue behaviour of a welded 316L stainless steel, Welding in the World 66, 1915–1927 (2022), [doi: 10.1007/s40194-022-01355-9, LillOA]
18. M.-A. Cota Araujo, J.-B. Vogt, J. Bouquerel, Retained austenite-aided cyclic plasticity of the quenched 9Ni steel, International Journal of Fatigue 152, 106445 (2021), [doi: 10.1016/j.ijfatigue.2021.106445, LillOA]
17. J. Bouquerel, C. Schayes, J.-B. Vogt, Experimental mesoscopic investigation of the local cyclic plasticity of a non-oriented electrical steel, Materials Science and Engineering: A 820, 141454 (2021), [doi: 10.1016/j.msea.2021.141454, LillOA]
16. J.-B. Vogt, I. Costa, A. Addad, J. Bouquerel, Fatigue intrusion-extrusion in a fully pearlitic steel, Materials Letters 127539 (2020), [doi: 10.1016/j.matlet.2020.127539, LillOA]
15. J.-B. Vogt, J. Bouquerel, C. Carlé, I. Proriol Serre, Stability of fatigue cracks at 350 °C in air and in liquid metal in T91 martensitic steel, International Journal of Fatigue (2020), [doi: 10.1016/j.ijfatigue.2019.105265, LillOA]
14. Z. Rykavets, J. Bouquerel, J.-B. Vogt, Z. Duriagina, V. Kulyk, T. Tepla, L. Bohun, T. Kovbasyuk, Investigation of the Microstructure and Properties of TRIP 800 Steel Subjected to Low-Cycle Fatigues, Progress in Physics of Metals 20;4, 620-633 (2019), [doi: 10.15407/ufm.20.04.620, LillOA]
13. J. Godon, P. Antoine, J.-B. Vogt, J. Bouquerel, Influence of steel cleanliness on drawability of fine filaments with high tensile strength, Metallurgical Research & Technology 116;5, 513 (2019), [doi: 10.1051/metal/2019025, LillOA]
12. J. Bouquerel, M. Delbove, J.-B. Vogt, Advanced processing of EBSD data to distinguish the complex microstructure evolution of a Cu-Ni-Si alloy induced by fatigue, Materials Characterization 145, 556-562 (2018), [doi: 10.1016/j.matchar.2018.09.017, LillOA]
11. B.C. NZOGANG, J. Bouquerel, P. Cordier, A. Mussi, J. Girard, S.-I. Karato, Characterization by Scanning Precession Electron Diffraction of an Aggregate of Bridgmanite and Ferropericlase Deformed at HP-HT, Geochemistry, Geophysics, Geosystems 19, 582-594 (2018), [doi: 10.1002/2017GC007244, LillOA]
10. B.C. NZOGANG, S. Thilliez, A. Mussi, T. Kawazoe, N. Miyajima, J. Bouquerel, P. Cordier, Application of Scanning Precession Electron Diffraction in the Transmission Electron Microscope to the Characterization of Deformation in Wadsleyite and Ringwoodite, Minerals 8, 153 (2018), [doi: 10.3390/min8040153, LillOA]
9. M. Delbove, J.-B. Vogt, J. Bouquerel, T. Soreau, N. François, F. Primaux, Microstructure Evolution of a Precipitation Hardened Cu-Ni-Si Alloy during Low Cycle Fatigue, Solid State Phenomena 258, 546-549 (2016), [doi: 10.4028/www.scientific.net/SSP.258.546, LillOA]
8. C. Schayes, J. Bouquerel, J.-B. Vogt, F. Palleschi, S. Zaefferer, A comparison of EBSD based strain indicators for the study of Fe-3Si steel subjected to cyclic loading, Materials Characterization 115, 61-70 (2016), [doi: 10.1016/j.matchar.2016.03.020, LillOA]
7. C. Schayes, J.-B. Vogt, J. Bouquerel, F. Palleschi, S. Zaefferer, Cyclic plasticity mechanism of the M330-35A steel, International Journal of Fatigue 82, 530-539 (2016), [doi: 10.1016/j.ijfatigue.2015.09.008, LillOA]
6. M. Delbove, J.-B. Vogt, J. Bouquerel, T. Soreau, F. Primaux, Low cycle fatigue behaviour of a precipitation hardened Cu-Ni-Si alloy, International Journal of Fatigue 92, 313-320 (2016), [doi: 10.1016/j.ijfatigue.2016.07.019, LillOA]
5. C. Schayes, J.-B. Vogt, J. Bouquerel, F. Palleschi, Rotor Design Optimisation through Low Cycle Fatigue Testing, Procedia Engineering 133, 233-243 (2015), [doi: 10.1016/j.proeng.2015.12.663, LillOA]
4. S. Bellayer, M. Jimenez, B. Gardelle, G. Delaplace, J. Bouquerel, S. Duquesne, S. Bourbigot, The electron microanalyzer (EPMA): a powerful device for the microanalysis of filled polymeric materials, Polymers for Advanced Technologies (2015), [doi: 10.1002/pat.3523, LillOA]
3. S. Hany, B. Duponchel, C. Poupin, A.A. Kais, D. Dewael, J.-B. Vogt, J. Bouquerel, H. Kacem, A. Mouftiez, S. Hariri, M. Milochova, E. Bychkov, E. Abi-Aad, Microstructural and Mechanical Properties of 9%Ni Steels Used for the Construction of LNG Storage Tanks, Advanced Materials Research 936, 1953-1957 (2014), [doi: 10.4028/www.scientific.net/AMR.936.1953, LillOA]
2. J. Bouquerel, B. Diawara, A. Dubois, M. Dubar, J.-B. Vogt, D. Najjar, Investigations of the microstructural response to a cold forging process of the 6082-T6 alloy, Materials & Design (2014), [doi: 10.1016/j.matdes.2014.12.005, LillOA]
1. B. Diawara, J. Bouquerel, J.-B. Vogt, D. Najjar, M. Dubar, J. Chone, J.-D. Guerin, P. Quaegebeur, Effect of the forming process on the microstructure of aluminium parts for collective transports, MATEC Web of Conferences 7, 1003 (2013), [doi: 10.1051/matecconf/20130701003, LillOA]

Full list (The link could be slow)

Conference presentations

10. L. ÁVILA, I. COSTA, J. Bouquerel, J.-B. Vogt, Low cycle fatigue of a fully pearlitic steel, Communication dans un congrès sans actes, Fatigue 2022+1, Hiroshima, Japon, Nov 2023 [LillOA]
9. M.-A. Cota Araujo, J.-M. Olive, G. Pecastaings, A. Addad, J. Bouquerel, J.-B. Vogt, Expertise par microscopies avancées du rôle de l’austénite dans la formation des extrusions en fatigue oligocyclique d’un acier cryogénique 9Ni, Communication dans un congrès sans actes, Matériaux 2022, Lille, France, Nov 2022 [LillOA]
8. M.-A. Cota Araujo, J. Bouquerel, J.-B. Vogt, Effect of reversed austenite on Low Cycle fatigue of a 9Ni steel, Communication dans un congrès sans actes, Fatigue 2022+1, Hiroshima, Japon, Nov 2023 [LillOA]
7. A. Mussi, B.C. NZOGANG, C. Bollinger, P. Cordier, J. Bouquerel, Characterization of recovery by boundary migration and dynamic recrystallization in experimentally deformed polycrystalline olivine, Poster, Intergranular and Interphase Boundaries in Materials - IIB 2019, Paris, France, Jul 2019 [LillOA]
6. M.-A. Cota Araujo, J.-B. Vogt, J. Bouquerel, INFLUENCE OF REVERSED AUSTENITE ON LOW CYCLE FATIGUE OF A 9NI STEEL, Communication dans un congrès sans actes, 20th International Colloquium on Mechanical Fatigue of Metals, Wroclaw, Pologne, Sep 2021 [LillOA]
5. L. Avila de Oliveira Silva, I. Costa, J. Bouquerel, J.-B. Vogt, L. Avila de Oliveira Silva, FATIGUE BEHAVIOUR OF PERLITIC STEELS, Communication dans un congrès sans actes, International Colloquium Mechanical Fatigue of Metals, Wroclaw, Pologne, Sep 2021 [LillOA]
4. L. Avila de Oliveira Silva, J. Bouquerel, J.-B. Vogt, Design of microstructural gradient for fatigue properties of pearlitic steels, Communication dans un congrès sans actes, Fatigue Design 2021, Senlis, France, Nov 2021 [LillOA]
3. M.-A. Cota Araujo, J.-B. Vogt, J. Bouquerel, Impact of a heat treatment on the microstructure and the low cycle fatigue properties of a 9Ni steel, Communication dans un congrès avec actes, 30th Anniversary International Conference on Metallurgy and Materials, Prague, République tchèque, May 2021 [LillOA]
2. L. ÁVILA DE OLIVEIRA SILVA, C. MESPLONT, J. Bouquerel, J.-B. Vogt, Study of the effect of the heat treatment parameters on the pearlitic transformation of an eutectoid steel wirE, Communication dans un congrès avec actes, 30th Anniversary International Conference on Metallurgy and Materials, Pragues, République tchèque, May 2021 [LillOA]
1. I. Costa, J.-B. Vogt, J. Bouquerel, C. Mesplont, Relations between microstructure and hardness of plain carbon steels using eddy current technique, Communication dans un congrès avec actes, 5th International Conference on Manufacturing, Material and Metallurgical Engineering, Osaka, Japon, Mar 2020 [LillOA]

Full list (The link could be slow)