Jean-Michel GLOAGUEN

Professor

Bâtiment C6 - 205
Unité Matériaux et Transformations
Cité scientifique, Bât. C6
Université de Lille
59655 Villeneuve d'Ascq
France
Tel: +33 (0)3 20 33 71 24
Fax: +33 (0) 320 43 65 91
Email : Send an email to Jean-Michel GLOAGUEN
ORCID Identifier :

Research team: Ingénierie des systèmes polymères

Teaching

Ecole Polytech’Lille

Defended PhD thesis

• Saadia Ouchiar, Structure-physical properties relationships of biocomposites based on biopolymer filled with clays: Influence of the nature and the content of the filler. Thesis defended in 2016. Other co-advisors: Grégory STOCLET, Cyrille Cabaret, Vincent Gloaguen. Position: R&D manager.
• J Soulestin, Elaboration et comportement mécanique de nanocomposites à matrice PMMA et renfort plaquettaires . Thesis defended in 2004. Other co-advisor: Jean-Marc LEFEBVRE. Position: Maitre de conférence, Ecole des mines de Douai.

Latest scientific contributions in LillOA (Lille Open Archive)

Publications

21. A. Mesbah, M. Elmeguenni, Z. Yan, F. Zairi, N. Ding, J.-M. Gloaguen, How stress triaxiality affects cavitation damage in high-density polyethylene: experiments and constitutive modeling, Polymer Testing 100, - (2021), [doi: 10.1016/j.polymertesting.2021.107248, LillOA]
20. R. Boulahia, F. Zairi, Y. Voznyak, J.-M. Gloaguen, Repeated equal-channel angular extrusion of polypropylene: processing routes and back-pressure influence 26, - (2021), [doi: 10.1016/j.mtcomm.2020.101754, LillOA]
19. M.N.D. Cherief, F. Zairi, N. Ding, J.-M. Gloaguen, M. Nait-Abdelaziz, M. Benguediab, Plasticity and thermally-induced recovery in polycarbonate, Mechanics of materials . an international journal 148, (2020), [doi: 10.1016/j.mechmat.2020.103515, LillOA]
18. A. Dinari, M. Chaabane, T. Benameur, Q. Guo, J.-M. Gloaguen, F. Zairi, Multiscale observation of the fatigue-induced damage mechanisms in carbon-black filled styrene-butadiene rubber, Macromolecular Materials and Engineering -, (2020), [doi: 10.1002/mame.202000227, LillOA]
17. K. Anoukou, A. Zaoui, F. Zairi, M. Naït-Abdelaziz, J.-M. Gloaguen, Structural and thermodynamics properties of organo-modified montmorillonite clay, Physica E. Low-dimensional Systems and Nanostructures 65, 56-60 (2015), [doi: 10.1016/j.physe.2014.07.025, LillOA]
16. G. Ayoub, F. Zairi, M. Naït-Abdelaziz, J.-M. Gloaguen, G. Kridli, A visco-hyperelastic damage model for cyclic stress-softening, hysteresis and permanent set in rubber using the network alteration theory, International Journal of Plasticity 54, 19-33 (2014), [doi: 10.1016/j.ijplas.2013.08.001, LillOA]
15. A. Mesbah, F. Zairi, M. Naït-Abdelaziz, J.-M. Gloaguen, K. Anoukou, A. Zaoui, Z. Qu, T. Boukharouba, J.-M. Lefebvre, Micromechanics-based constitutive modeling of plastic yielding and damage mechanisms in polymer-clay nanocomposites: Application to polyamide-6 and polypropylene-based nanocomposites, Composites Science and Technology 101, 71-78 (2014), [doi: 10.1016/j.compscitech.2014.05.032, LillOA]
14. K. Anoukou, F. Zairi, M. Naït-Abdelaziz, A. Zaoui, Z. Qu, J.-M. Gloaguen, J.-M. Lefebvre, A micromechanical model taking into account the contribution of α- and γ-crystalline phases in the stiffening of polyamide 6-clay nanocomposites: A closed-formulation including the crystal symmetry, Composites Part B. Engineering 64, 84-96 (2014), [doi: 10.1016/j.compositesb.2014.01.012, LillOA]
13. K. Hachour, F. Zairi, M. Naït-Abdelaziz, J.-M. Gloaguen, M. Aberkane, J.-M. Lefebvre, Experiments and modeling of high-crystalline polyethylene yielding under different stress states, International Journal of Plasticity 54, 1-18 (2014), [doi: 10.1016/j.ijplas.2013.06.004, LillOA]
12. F. Bouaksa, C. Ovalle Rodas, F. Zairi, G. Stoclet, M. Naït-Abdelaziz, J.-M. Gloaguen, T. Tamine, J.-M. Lefebvre, Molecular chain orientation in polycarbonate during equal channel angular extrusion: Experiments and simulations, Computational Materials Science 85, 244-252 (2014), [doi: 10.1016/j.commatsci.2013.12.028, LillOA]
11. M. Elmeguenni, M. Naït-Abdelaziz, F. Zairi, J.-M. Gloaguen, Fracture characterization of high-density polyethylene pipe materials using the J-integral and the essential work of fracture, International Journal of Fracture 183, 119-133 (2013), [doi: 10.1007/s10704-013-9848-x, LillOA]
10. K. Anoukou, A. Zaoui, F. Zairi, M. Naït-Abdelaziz, J.-M. Gloaguen, Molecular dynamics study of the polymer clay nanocomposites (PCNs): Elastic constants and basal spacing predictions, Computational Materials Science 77, 417-423 (2013), [doi: 10.1016/j.commatsci.2013.04.015, LillOA]
9. G. Ayoub, M. Naït-Abdelaziz, F. Zairi, J.-M. Gloaguen, P. Charrier, Fatigue life prediction of rubber-like materials under multiaxial loading using a continuum damage mechanics approach: Effects of two-blocks loading and R ratio, Mechanics of Materials 52, 87-102 (2012), [doi: 10.1016/j.mechmat.2012.03.012, LillOA]
8. G. Ayoub, M. Naït-Abdelaziz, F. Zairi, J.-M. Gloaguen, P. Charrier, A continuum damage model for the high-cycle fatigue life prediction of styrene-butadiene rubber under multiaxial loading, International Journal of Solids and Structures 48, 2458-2466 (2011), [doi: 10.1016/j.ijsolstr.2011.04.003, LillOA]
7. F. Zairi, J.-M. Gloaguen, M. Naït-Abdelaziz, A. Mesbah, J.-M. Lefebvre, Study of the effect of size and clay structural parameters on the yield and post-yield response of polymer/clay nanocomposites via a multiscale micromechanical modelling, Acta Materialia 59, 3851-3863 (2011), [doi: 10.1016/j.actamat.2011.03.009, LillOA]
6. G. Ayoub, F. Zairi, C. Fréderix, J.-M. Gloaguen, M. Naït-Abdelaziz, R. Séguéla, J.-M. Lefebvre, Effects of crystal content on the mechanical behaviour of polyethylene under finite strains: Experiments and constitutive modelling, International Journal of Plasticity 27, 492-511 (2011), [doi: 10.1016/j.ijplas.2010.07.005, LillOA]
5. G. Ayoub, F. Zairi, M. Naït-Abdelaziz, J.-M. Gloaguen, Modeling the low-cycle fatigue behavior of visco-hyperelastic elastomeric materials using a new network alteration theory: Application to styrene-butadiene rubber, Journal of the Mechanics and Physics of Solids 59, 473-495 (2011), [doi: 10.1016/j.jmps.2010.09.016, LillOA]
4. K. Anoukou, F. Zairi, M. NAIT ABDELAZIZ, A. Zaoui, T. Messager, J.-M. Gloaguen, On the overall elastic moduli of polymer-clay nanocomposite materials using a self-consistent approach. Part I: Theory, Composites Science and Technology 71, 197-205 (2011), [doi: 10.1016/j.compscitech.2010.11.018, LillOA]
3. K. Anoukou, F. Zairi, M. Naït-Abdelaziz, A. Zaoui, T. Messager, J.-M. Gloaguen, On the overall elastic moduli of polymer-clay nanocomposite materials using a self-consistent approach. Part II: Experimental verification, Composites Science and Technology 71, 206-215 (2011), [doi: 10.1016/j.compscitech.2010.11.020, LillOA]
2. F. Zairi, M. Naït-Abdelaziz, J.-M. Gloaguen, J.-M. Lefebvre, A physically-based constitutive model for anisotropic damage in rubber-toughened glassy polymers during finite deformation, International Journal of Plasticity 27, 25-51 (2011), [doi: 10.1016/j.ijplas.2010.03.007, LillOA]
1. S. Belbachir, F. Zairi, G. Ayoub, U. Maschke, M. Naït-Abdelaziz, J.-M. Gloaguen, M. Benguediab, J.-M. Lefebvre, Modelling of photodegradation effect on elastic-viscoplastic behaviour of amorphous polylactic acid films, Journal of the Mechanics and Physics of Solids 58, 241-255 (2010), [doi: 10.1016/j.jmps.2009.10.003, LillOA]

Full list (The link could be slow)

Conference presentations

8. H. Lamnii, M. NAIT ABDELAZIZ, G. Ayoub, J.-M. Gloaguen, U. Maschke, B. Mansoor, Effect of UV Ageing on the fatigue life of bulk polyethylene, Communication dans un congrès avec actes, FATIGUE 2018, Poitiers, France, May 2018 [LillOA]
7. C. Nguyen Thai, S. Barrau, J.-M. Gloaguen, P. Leclere, Characterization by means of Scanning Probe Microscopy of Poly(lactic acid)-based fibers for electromechanical energy harvesting applications, Communication dans un congrès sans actes, UGéPE 2018, Villeneuve d'Ascq, France, Nov 2018 [LillOA]
6. C. Nguyen Thai, S. Barrau, J.-M. Gloaguen, P. Leclere, Characterization by means of SPM of bio-based textile fibers for electromechanical energy harvesting applications, Poster, SPMonSPM, Leuven, Belgique, Aug 2018 [LillOA]
5. C. Nguyen Thai, A. De Neef, V. Sessini, S. Barrau, J.-M. Gloaguen, J.-M. Raquez, P. Leclere, Development, Characterization and Integration of Piezoelectric Bio-based Textile fibers for Energy Harvesting Applications, Poster, Forum des Microscopies à Sonde Locale, La Rochelle, France, Mar 2018 [LillOA]
4. S. Boutaleb, F. Zairi, A. Mesbah, M. Naït-Abdelaziz, J.-M. Gloaguen, K. Azouaoui, Micromecanichal modelling of stiffness and yield stress for particulate silica/polymer with an inhomogeneous interphase, Communication dans un congrès sans actes, EMI International Conference, Metz, France, Oct 2016 [LillOA]
3. S. Ouchiar, G. Stoclet, C. Cabaret, J.-M. Gloaguen, V. Gloaguen, Relations structure-propriétés de composites à base de Poly(acide lactique) et taux de charges minérales élevés, Communication dans un congrès sans actes, DEPOS 25, Presqu'île de Giens, France, Mar 2014 [LillOA]
2. S. Ouchiar, G. Stoclet, C. Cabaret, J.-M. Gloaguen, V. Gloaguen, Relations structure-propriétés de nouveaux nanocomposites à matrices polymères issus de ressources renouvelables, Poster, GFP-BPG 2013, Roubaix, France, Nov 2013 [LillOA]
1. J.-M. Gloaguen, J.-M. Lefebvre, F. Peurton, R. Séguéla, G. Stoclet, J. Devaux, M. Sclavons, Structural organization and Mechanical Behavior of PLA Nanocomposites with untreated Clay, Poster, ECNP 6, Madrid, Espagne, Apr 2010 [LillOA]

Patents (old list, before 2018)

2. 2013 - B. Hue, J. M. Gloaguen: Suivi de la striction d'un matériau quel que soit son aspect par deux caméras 3D.
   Brevet FR n°1360061 déposé le 16/10/2013
1. 2006 - R. Delobel, S. Duquesne, J. M. Gloaguen, C. Jama, J. M. Lefebvre, P. Bardollet: Polymer matrix composites comprising a two-filler population .
   WO2006018495 (A1)par CNRS