Publications in international research journals

64. C.A. Bernard, O. Lame, T. Deplancke, J.-y. Cavaillé, K. Ogawa, From rheological to original three-dimensional mechanical modelling of semi-crystalline polymers: Application to a wide strain rate range and large deformation of Ultra-High Molecular Weight PolyEthylene, MECHANICS OF MATERIALS 151, 103640 (2020), [doi: 10.1016/j.mechmat.2020.103640, LillOA]
63. M. Dufay, M. Jimenez, S. Degoutin, Effect of Cold Plasma Treatment on Electrospun Nanofibers Properties: A Review, ACS Applied Bio Materials 3;8, 4696-4716 (2020), [doi: 10.1021/acsabm.0c00154, LillOA]
62. S. Fernandes Nassar, N. Delpouve, C. Sollogoub, A. Guinault, G. Stoclet, G. Régnier, S. Domenek, Impact of Nanoconfinement on Polylactide Crystallization and Gas Barrier Properties, ACS Applied Materials & Interfaces 12;8, 9953-9965 (2020), [doi: 10.1021/acsami.9b21391, LillOA]
61. A. De Neef, C. Samuel, H. Amorín, G. Stoclet, R. Jiménez, P. Dubois, J. Soulestin, J.-M. Raquez, Beta Phase Crystallization and Ferro- and Piezoelectric Performances of Melt-Processed Poly(vinylidene difluoride) Blends with Poly(methyl methacrylate) Copolymers Containing Ionizable Moieties, ACS Applied Polymer Materials 2;9, 3766-3780 (2020), [doi: 10.1021/acsapm.0c00351, LillOA]
60. O. Oguz, N. Candau, A. Demongeot, M.K. Citak, F.N. Cetin, G. Stoclet, V. Michaud, Y.Z. Menceloglu, Poly(lactide)/cellulose nanocrystal nanocomposites by high‐shear mixing, Polymer Engineering & Science 61;4, 1028-1040 (2020), [doi: 10.1002/pen.25621, LillOA]
59. F. Samyn, O. Murariu, L. Bonnaud, S. Duquesne, Preparation and flame retardancy of flax fabric/polybenzoxazine laminates, Fire and Materials 45;3, 366-378 (2020), [doi: 10.1002/fam.2839, LillOA]
58. M.N.D. Cherief, F. Zairi, N. Ding, J.-M. Gloaguen, M. Nait-Abdelaziz, M. Benguediab, Plasticity and thermally-induced recovery in polycarbonate, Mechanics of materials . an international journal 148, (2020), [doi: 10.1016/j.mechmat.2020.103515, LillOA]
57. A. Dinari, M. Chaabane, T. Benameur, Q. Guo, J.-M. Gloaguen, F. Zairi, Multiscale observation of the fatigue-induced damage mechanisms in carbon-black filled styrene-butadiene rubber, Macromolecular Materials and Engineering -, (2020), [doi: 10.1002/mame.202000227, LillOA]
56. A.-L. Davesne, T. Bensabath, J. Sarazin, S. Bellayer, F. Parent, F. Samyn, M. Jimenez, F. Sanchette, Low-Emissivity Metal/Dielectric Coatings as Radiative Barriers for the Fire Protection of Raw and Formulated Polymers, ACS Applied Polymer Materials 2;7, 2880-2889 (2020), [doi: 10.1021/acsapm.0c00399, LillOA]
55. M. Dufaye, S. Duval, G. Stoclet, D. Mara, R. Van Deun, T. Loiseau, Synthesis and structural characterization of lanthanide-containing polytungsto-antimonate [{sb-3(mu(3)-o)(2)ln(h2o)ln(h2o)(2)}(2)(sbw10o37)(2)(sbw8o31)(2)](22)(-)molecules deriving from the decomposition of the [sb8w36o132](24)(-)macroanion, European journal of inorganic chemistry (2020), [doi: 10.1002/ejic.202000613, LillOA]
54. R. Mundil, F. Kayser, A. Huret, G. Stoclet, P. Zinck, F. Kayser, Organocatalytic sequential ring-opening polymerization of a cyclic ester and anionic polymerization of a vinyl monomer, Chemical communications (Cambridge, England) 58, (2020), [doi: 10.1039/d0cc02906h, LillOA]
53. M. Dufaye, S. Duval, G. Stoclet, T. Loiseau, Influence of ph on ce-iv-[(asw9o33)-w-iii](9-) association for the formation of hexanuclear cerium(iv) oxo-hydroxo-clusters stabilized by trivacant polyanions, Crystengcomm 22, 371-380 (2020), [doi: 10.1039/c9ce01663e, LillOA]
52. T. Bensabath, J. Sarazin, S. Bourbigot, Anisotropy of expandable graphite to explain its behavior as a flame-retardant, Journal of Fire Sciences 39;2, 109-118 (2020), [doi: 10.1177/0734904120969639, LillOA]
51. Z. Hadjou Belaid, L. Benhabib, D. Beroguiaa, F. Abdoune, L. Méchernène, U. Maschke, Thermal study of photopolymerization reaction in polyacrylate/liquid crystal blends, Materials Today: Proceedings 31;Supplement 1, S9-S11 (2020), [doi: 10.1016/j.matpr.2020.05.026, LillOA]
50. F. Nonque, A. Sahut, N. Jacquel, R. Saint-Loup, P. Woisel, J. Potier, Isosorbide monoacrylate: a sustainable monomer for the production of fully bio-based polyacrylates and thermosets, Polymer Chemistry 11;43, 6903-6909 (2020), [doi: 10.1039/d0py00957a, LillOA]
49. H.L. Boudjema, H. Bendaikha, U. Maschke, Green composites based on Atriplex halimus fibers and PLA matrix, Journal of Polymer Engineering 40;8, 693-702 (2020), [doi: 10.1515/polyeng-2020-0068, LillOA]
48. G. Bai, J.-C. Hornez, U. Maschke, P. Supiot, E. Bres, Modification of hydroxyapatite surface properties by electron irradiation, Radiation Physics and Chemistry 177, 109192 (2020), [doi: 10.1016/j.radphyschem.2020.109192, LillOA]
47. S. Bedjaoui, L. Bedjaoui, M.-E.-A. Benbekeda, F. Dubois, D. Merah, P. Supiot, C. Foissac, U. Maschke, Unusual swelling of acrylate based crosslinked polymer networks in linear primary alcohols: Experimental and modeling aspects, Journal of Molecular Liquids 320;Part B, 114459 (2020), [doi: 10.1016/j.molliq.2020.114459, LillOA]
46. H. Aldoori, Z. Bouberka, A. Nadim, Y. Agguine, S. Eddarir, P. Supiot, C. Foissac, U. Maschke, Photodegradation of Decabromo Diphenyl Ether Flame Retardant in Poly (Acrylonitrile Butadiene Styrene) (ABS), Journal of Macromolecular Science Part B Physics 59;10, 609-620 (2020), [doi: 10.1080/00222348.2020.1763607, LillOA]
45. K.E. Boudraa, T. Bouchaour, C. Beyens, U. Maschke, Novel interpenetrating polymer network composed of poly(butyl acrylates) and poly(ethyl-hexyl acrylate), International Journal of Polymer Analysis and Characterization 25;1, 18-33 (2020), [doi: 10.1080/1023666x.2020.1737467, LillOA]
44. K. Li, Y. Zou, S. Bourbigot, J. Ji, X. Chen, Pressure effects on morphology of isotropic char layer, shrinkage, cracking and reduced heat transfer of wooden material, Proceedings of the Combustion Institute (2020), [doi: 10.1016/j.proci.2020.07.072, LillOA]
43. F. Bonnet, P. Zinck, Vers des polyesters biosourcés et recyclables, Actualite Chimique 456-458, 31-36 (2020), [LillOA]
42. L. Duchatel-Crépy, N. Joly, P. Martin, A. Marin, J.-F. Tahon, J.-M. Lefebvre, V. Gaucher, Substitution degree and fatty chain length influence on structure and properties of fatty acid cellulose esters, Carbohydrate Polymers 234, 115912 (2020), [doi: 10.1016/j.carbpol.2020.115912, LillOA]
41. S. Xu, J.-F. Tahon, I. De Waele, G. Stoclet, V. Gaucher, Brittle-to-ductile transition of PLA induced by macromolecular orientation, Express Polymer Letters 14;11, 1034-1047 (2020), [doi: 10.3144/expresspolymlett.2020.84, LillOA]
40. L. Geoffroy, A.-L. Davesne, F. Parent, F. Sanchette, F. Solarski, M. Jimenez, S. Bourbigot, Combining Low-Emissivity Thin Coating and 3D-Printed Original Designs for Superior Fire-Protective Performance, ACS Omega 5;43, 27857–27863 (2020), [doi: 10.1021/acsomega.0c02902, LillOA]
39. B. Malfait, N. T. Correia, C. Ciotonea, J. Dhainaut, J.-P. Dacquin, s. royer, N. Tabary, Y. Guinet, A. Hedoux, Manipulating the physical states of confined ibuprofen in SBA-15 based drug delivery systems obtained by solid-state loading: Impact of the loading degree, The Journal of Chemical Physics 153;15, 154506 (2020), [doi: 10.1063/5.0020992, LillOA]
38. Z. Belattmania, S. Kaidi, S. El Atouani, C. Katif, F. Bentiss, c. Jama, A. Reani, B. Sabour, V. Vasconcelos, Isolation and FTIR-ATR and 1H NMR Characterization of Alginates from the Main Alginophyte Species of the Atlantic Coast of Morocco, Molecules 25;18, 4335 (2020), [doi: 10.3390/molecules25184335, LillOA]
37. S. Klaimy, C. Ciotonea, J. Dhainaut, s. royer, M. Casetta, S. Duquesne, G. Tricot, J.-F. Lamonier, Flash Catalytic Pyrolysis of Polyethylene over (Alumino)silicate Materials, ChemCatChem 12;4, 1109-1116 (2020), [doi: 10.1002/cctc.201901819, LillOA]
36. M. Lebrini, F. Suedile, P. Salvin, C. Roos, A. Zarrouk, c. Jama, F. Bentiss, Bagassa guianensis ethanol extract used as sustainable eco-friendly inhibitor for zinc corrosion in 3% NaCl: Electrochemical and XPS studies, Surfaces and Interfaces 100588 (2020), [doi: 10.1016/j.surfin.2020.100588, LillOA]
35. J.-F. Brun, C. Binet, J.-F. Tahon, A. Addad, P. TRANCHARD, S. Barrau, Thermoelectric properties of bulk multi-walled carbon nanotube - poly(vinylidene fluoride) nanocomposites: Study of the structure/property relationships, Synthetic Metals 116525 (2020), [doi: 10.1016/j.synthmet.2020.116525, LillOA]
34. A. Ramgobin, G. Fontaine, S. Bourbigot, A Case Study of Polyether Ether Ketone (I): Investigating the Thermal and Fire Behavior of a High-Performance Material, Polymers 12;8, 1789 (2020), [doi: 10.3390/polym12081789, LillOA]
33. A. Ramgobin, G. Fontaine, S. Bourbigot, Oxygen concentration and modeling thermal decomposition of a high‐performance material: A case study of polyimide (Cirlex), Polymers for Advanced Technologies (2020), [doi: 10.1002/pat.5060, LillOA]
32. W. Tang, Z. Qin, F. Liu, S. Gong, C. Peng, X. Gu, S. Zhang, X. Wang, X. Jin, S. Bourbigot, Influence of two kinds of low dimensional nano-sized silicate clay on the flame retardancy of polypropylene, Materials Chemistry and Physics 256, 123743 (2020), [doi: 10.1016/j.matchemphys.2020.123743, LillOA]
31. J. Junthip, N. Tabary, M. Maton, S. Ouerghemmi, J.-N. Staelens, F. Cazaux, C. Neut, N. Blanchemain, B. Martel, Release-killing properties of a textile modified by a layer-by-layer coating based on two oppositely charged cyclodextrin polyelectrolytes, International Journal of Pharmaceutics 587, 119730 (2020), [doi: 10.1016/j.ijpharm.2020.119730, LillOA]
30. S. Bourbigot, J. Sarazin, T. Bensabath, Intumescent polypropylene in extreme fire conditions, Fire Safety Journal 103082 (2020), [doi: 10.1016/j.firesaf.2020.103082, LillOA]
29. L. Geoffroy, A.-L. Davesne, S. Bellayer, F. Blanchard, E. Richard, F. Samyn, M. Jimenez, S. Bourbigot, 3D printed sandwich materials filled with hydrogels for extremely low heat release rate, Polymer Degradation and Stability 179, 109269 (2020), [doi: 10.1016/j.polymdegradstab.2020.109269, LillOA]
28. A. Attou, M. Tourabi, A. Benikdes, O. Benali, H. Ouici, F. Benhiba, A. Zarrouk, c. Jama, F. Bentiss, Experimental studies and computational exploration on the 2-amino-5-(2-methoxyphenyl)-1,3,4-thiadiazole as novel corrosion inhibitor for mild steel in acidic environment, Colloids and Surfaces A: Physicochemical and Engineering Aspects 125320 (2020), [doi: 10.1016/j.colsurfa.2020.125320, LillOA]
27. M. El Faydy, F. Benhiba, A. Berisha, Y. Kerroum, C. Jama, B. Lakhrissi, A. Guenbour, I. Warad, A. Zarrouk, An experimental-coupled empirical investigation on the corrosion inhibitory action of 7-alkyl-8-Hydroxyquinolines on C35E steel in HCl electrolyte, Journal of Molecular Liquids 113973 (2020), [doi: 10.1016/j.molliq.2020.113973, LillOA]
26. A. Ramgobin, G. Fontaine, S. Bourbigot, A Case Study of Polyetheretherketone (II): Playing with Oxygen Concentration and Modeling Thermal Decomposition of a High-Performance Material, Polymers 12;7, 1577 (2020), [doi: 10.3390/polym12071577, LillOA]
25. M. Lebrini, W. Benkayba, c. Jama, F. Bentiss, C. Roos, 2-Amino-1-(4-aminophenyl)-1H-pyrrolo(2,3-b)quinoxaline-3- carbonitrile as an efficient inhibitor for the corrosion of C38 steel in hydrochloric acid solution, International Journal of Electrochemical Science 2326-2334 (2020), [doi: 10.20964/2020.03.46, LillOA]
24. M. Rbaa, F. Benhiba, M. Galai, A.S. Abousalem, M. Ouakki, C.-H. Lai, B. Lakhrissi, c. Jama, I. Warad, M. Ebn Touhami, A. Zarrouk, Synthesis and characterization of novel Cu (II) and Zn (II) complexes of 5-{[(2-Hydroxyethyl) sulfanyl] methyl}-8-hydroxyquinoline as effective acid corrosion inhibitor by experimental and computational testings, Chemical Physics Letters 137771 (2020), [doi: 10.1016/j.cplett.2020.137771, LillOA]
23. S. Fadlallah, J. Jothieswaran, I. Del Rosal, L. Maron, F. Bonnet, M. Visseaux, Rationalizing the Reactivity of Mixed Allyl Rare-Earth Borohydride Complexes with DFT Studies, Catalysts 10, 820 (2020), [doi: 10.3390/catal10080820, LillOA]
22. M. Rbaa, M. Ouakki, M. Galai, A. Berisha, B. Lakhrissi, c. Jama, I. Warad, A. Zarrouk, Simple preparation and characterization of novel 8-Hydroxyquinoline derivatives as effective acid corrosion inhibitor for mild steel: Experimental and theoretical studies, Colloids and Surfaces A: Physicochemical and Engineering Aspects 125094 (2020), [doi: 10.1016/j.colsurfa.2020.125094, LillOA]
21. M. El Faydy, B. Lakhrissi, c. Jama, A. Zarrouk, L.O. Olasunkanmi, E.E. Ebenso, F. Bentiss, Electrochemical, surface and computational studies on the inhibition performance of some newly synthesized 8-hydroxyquinoline derivatives containing benzimidazole moiety against the corrosion of carbon steel in phosphoric acid environment, Journal of Materials Research and Technology 9;1, 727-748 (2020), [doi: 10.1016/j.jmrt.2019.11.014, LillOA]
20. H. Bourazmi, M. Rbaa, R. Benkaddour, F. Bentiss, c. Jama, J. Costa, M. Tabyaoui, A. Zarrouk, Essential Oil of Salvia officinalis as Novel Eco-Friendly Inhibitor for Carbon Steel in HCl Solution: Weight Loss, Electrochemical and XPS Studies, Protection of Metals and Physical Chemistry of Surfaces 56;2, 438-449 (2020), [doi: 10.1134/s2070205120020045, LillOA]
19. S. Chemchoub, L. Oularbi, A. El Attar, S.A. Younssi, F. Bentiss, c. Jama, M. El Rhazi, Cost-effective non-noble metal supported on conducting polymer composite such as nickel nanoparticles/polypyrrole as efficient anode electrocatalyst for ethanol oxidation, Materials Chemistry and Physics 123009 (2020), [doi: 10.1016/j.matchemphys.2020.123009, LillOA]
18. S. Bellayer, M. Jimenez, S. Barrau, A. Marin, J. Sarazin, S. Bourbigot, Formulation of eco-friendly sol–gel coatings to flame-retard flexible polyurethane foam, Green materials 1-11 (2020), [doi: 10.1680/jgrma.19.00059, LillOA]
17. N. Bricout, F. Chai, J. Sobocinski, A. Hertault, W. Laure, A. Ung, P. Woisel, J. Lyskawa, N. Blanchemain, Immobilisation of an anti-platelet adhesion and anti-thrombotic drug (EP224283) on polydopamine coated vascular stent promoting anti-thrombogenic properties, Materials Science and Engineering: C 110967 (2020), [doi: 10.1016/j.msec.2020.110967, LillOA]
16. S. Fadlallah, N. Tabary, S. Noel, B. Leger, F. Cazaux, E. Monflier, B. Martel, Synthesis of novel catalytic composite nanofibers containing ruthenium nanoparticles stabilized by a citric acid-β-cyclodextrin polymer, Nanoscale Advances 2;5, 2087-2098 (2020), [doi: 10.1039/c9na00791a, LillOA]
15. D. Kersani, J. Mougin, M. Lopez, S. Degoutin, N. Tabary, F. Cazaux, L. Janus, M. Maton, F. Chai, J. Sobocinski, N. Blanchemain, B. Martel, Stent coating by electrospinning with chitosan/poly-cyclodextrin based nanofibers loaded with simvastatin for restenosis prevention, European Journal of Pharmaceutics and Biopharmaceutics 150, 156-167 (2020), [doi: 10.1016/j.ejpb.2019.12.017, LillOA]
14. L. Geoffroy, F. Samyn, M. Jimenez, S. Bourbigot, Bilayer Intumescent Paint Metal Laminates: A Novel Design for a High-Performance Fire Barrier, Industrial & Engineering Chemistry Research 59;7, 2988-2997 (2020), [doi: 10.1021/acs.iecr.9b06345, LillOA]
13. X. Liu, X. Meng, J. Sun, W. Tang, S. Chen, X. Peng, X. Gu, B. Fei, S. Bourbigot, S. Zhang, Improving the flame retardant properties of polyester-cotton blend fabrics by introducing an intumescent coating via layer by layer assembly, Journal of Applied Polymer Science 49253 (2020), [doi: 10.1002/app.49253, LillOA]
12. Q. Sun, Y. Ding, S.I. Stoliarov, J. Sun, G. Fontaine, S. Bourbigot, Development of a pyrolysis model for an intumescent flame retardant system: Poly(lactic acid) blended with melamine and ammonium polyphosphate, Composites Part B: Engineering 108055 (2020), [doi: 10.1016/j.compositesb.2020.108055, LillOA]
11. H. Yang, B. Yu, X. Xu, S. Bourbigot, H. Wang, P. Song, Lignin-derived bio-based flame retardants toward high-performance sustainable polymeric materials, Green Chemistry 22;7, 2129-2161 (2020), [doi: 10.1039/d0gc00449a, LillOA]
10. H. Guo, D. Hourdet, A. Marcellan, F. Stoffelbach, J. Lyskawa, L. De Smet, A. Vebr, R. Hoogenboom, P. Woisel, Dual Responsive Regulation of Host–Guest Complexation in Aqueous Media to Control Partial Release of the Host, Chemistry - A European Journal 26;6, 1292-1297 (2020), [doi: 10.1002/chem.201904287, LillOA]
9. A. Hamieh, F. Ponchel, S. Barrau, D. Remiens, Synthesis of lead-free (Bi0,5Na0,5)TiO3 thin film by RF magnetron sputtering: Impact of Na on the properties of film, Ferroelectrics 556;1, 79-86 (2020), [doi: 10.1080/00150193.2020.1713345, LillOA]
8. J.-E. Potaufeux, J. Odent, D. Notta-Cuvier, R. Delille, S. Barrau, E.P. Giannelis, F. Lauro, J.-M. Raquez, Mechanistic insights on ultra-tough polylactide-based ionic nanocomposites, Composites Science and Technology 108075 (2020), [doi: 10.1016/j.compscitech.2020.108075, LillOA]
7. C. Nguyen Thai, S. Barrau, M. Dufay, N. Tabary, A. Da Costa, A. Ferri, R. Lazzaroni, J.-M. Raquez, P. Leclere, On the Nanoscale Mapping of the Mechanical and Piezoelectric Properties of Poly (L-Lactic Acid) Electrospun Nanofibers, Applied Sciences 10;2, 652 (2020), [doi: 10.3390/app10020652, LillOA]
6. T. Messin, S. Marais, N. Follain, A. Guinault, V. Gaucher, N. Delpouve, C. Sollogoub, Biodegradable PLA/PBS multinanolayer membrane with enhanced barrier performances, Journal of Membrane Science 117777 (2020), [doi: 10.1016/j.memsci.2019.117777, LillOA]
5. X. Wang, S. Wang, W. Wang, H. Li, X. Liu, X. Gu, S. Bourbigot, Z. Wang, J. Sun, S. Zhang, The flammability and mechanical properties of poly (lactic acid) composites containing Ni-MOF nanosheets with polyhydroxy groups, Composites Part B: Engineering 107568 (2020), [doi: 10.1016/j.compositesb.2019.107568, LillOA]
4. N. Touaa, Z. Bouberka, C.-E. Gherdaoui, P. Supiot, P. Roussel, C. Pierlot, U. Maschke, Titanium and iron modified delaminated muscovite as photocatalyst for enhanced degradation of Tetrabromobisphenol A by visible light, Functional Materials Letters 13;03, 2051008 (2020), [doi: 10.1142/S179360472051008X, LillOA]
3. A. Ferri, S. Barrau, R. Bourez, A. Da Costa, M.-H. Chambrier, A. Marin, J. Defebvin, J.-M. Lefebvre, R. Desfeux, Probing the local piezoelectric behavior in stretched barium titanate/poly(vinylidene fluoride) nanocomposites, COMPOSITES SCIENCE AND TECHNOLOGY 107914 (2020), [doi: 10.1016/j.compscitech.2019.107914, LillOA]
2. E. Louisy, S. Bellayer, G. Fontaine, L. Rozes, F. Bonnet, Novel hybrid poly(l-lactic acid) from titanium oxo-cluster via reactive extrusion polymerization, European Polymer Journal 122, 109238 (2020), [doi: 10.1016/j.eurpolymj.2019.109238, LillOA]
1. C. Lemesle, J. Frémiot, A. Beaugendre, M. Casetta, S. Bellayer, S. Duquesne, A.-S. Schuller, M. Jimenez, Life cycle assessment of multi-step versus one-step coating processes using oil or bio-based resins, Journal of Cleaner Production 242, 118527 (2020), [doi: 10.1016/j.jclepro.2019.118527, LillOA]