Français - English - Intranet
Unité Matériaux et Transformations empty space

Unité Matériaux et Transformations
CNRS UMR 8207 - Université de Lille

Publications de l'UMET

2025 - 2024 - 2023 - 2022 - 2021 - 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010

Les publications du laboratoire dans LillOA (Lille Open Archive)

Erreur : Data too long for column 'contenu' at row 1.
Warning: mysqli_stmt_close(): Couldn't fetch mysqli_stmt in /var/www/html/Private/LillOA/func-LillOA-UMET.php on line 97

Chapitres d'ouvrage

  1. P.-K. Jha, T. Benezech, M. Deleplace, C. Faille, Microbial Contamination of Equipment Surfaces in Agro‐Industries, in Hazards in the Food Processing and Distribution Chain, Wiley pp. 103-139 (2022) [doi: 10.1002/9781394173822.ch3, LillOA]
  2. S. Merkel, Deformation and Plasticity of Materials under Extreme Conditions, in Static and Dynamic High Pressure Mineral Physics [Y. Fei, M.J. Walter (eds)], Cambridge University Press (CUP) pp. 239-265 (2022) [LillOA]
  3. S. Bourbigot, Evaluation of condensed phase: Char/residue analysis, in Analysis of Flame Retardancy in Polymer Science, Elsevier pp. 191-231 (2022) [doi: 10.1016/b978-0-12-824045-8.00006-x, LillOA]

Publications dans des revues internationales

  1. M. Abdallah, L. Azevedo-Scudeller, M. Hiolle, C. Lesur, A. Baniel, G. Delaplace, Review on mechanisms leading to fouling and stability issues related to heat treatment of casein-based RTD beverages, Food and Bioproducts Processing 67-83 (2022), [doi: 10.1016/j.fbp.2022.09.009, LillOA]
  2. Y. Auad, M. Walls, J.-D. Blazit, O. Stéphan, L.H. Tizei, M. Kociak, F. de la Peña, M. Tencé, Event-based hyperspectral EELS: towards nanosecond temporal resolution, Ultramicroscopy 239, 113539 (2022), [doi: 10.1016/j.ultramic.2022.113539, LillOA]
  3. V.A. Annakodi, R. Arvind Singh, S. Jayalakshmi, Y. Zhang, M. Anaz Khan, K. Srinivas Rao, R. Shabadi, Patterning SS304 Surface at Microscale to Reduce Wettability and Corrosion in Saline Water, Metals 12;7, 1137 (2022), [doi: 10.3390/met12071137, LillOA]
  4. A. Karati, S.R. Mishra, S. Ghosh, R.C. Mallik, R. Shabadi, R. Ramanujan, S.K. Yadav, B. Murty, U. Varadaraju, Thermoelectric properties of a high entropy half-Heusler alloy processed by a fast powder metallurgy route, Journal of Alloys and Compounds 924, 166108 (2022), [doi: 10.1016/j.jallcom.2022.166108, LillOA]
  5. A. Karati, S. Ghosh, M. Nagini, R.C. Mallik, R. Shabadi, B. Murty, U. Varadaraju, Thermoelectric properties of nanocrystalline half-Heusler high-entropy Ti2NiCoSn1−xSb1+x (x = 0.3, 0.5, 0.7, 1) alloys with VEC > 18, Journal of Alloys and Compounds 166578 (2022), [doi: 10.1016/j.jallcom.2022.166578, LillOA]
  6. Q. Deshoulles, M.L. Gall, S. Benali, J.-M. Raquez, C. Dreanno, M. Arhant, D. Priour, S. Cerantola, G. Stoclet, P.L. Gac, Hydrolytic degradation of biodegradable poly(butylene adipate-co-terephthalate) (PBAT) - Towards an understanding of microplastics fragmentation, Polymer Degradation and Stability 205, 110122 (2022), [doi: 10.1016/j.polymdegradstab.2022.110122, LillOA]
  7. F. Marx, S. Pal, J. Sautaux, N. Pallab, G. Stoclet, C. Weder, S. Schrettl, Plasticization of a Semicrystalline Metallosupramolecular Polymer Network, ACS Polymers Au 3;1, 132-140 (2022), [doi: 10.1021/acspolymersau.2c00044, LillOA]
  8. N. Candau, E. Vives, A.I. Fernandez, O. Oguz, G. Corvec, C.E. Federico, J.P. Cosas Fernandes, G. Stoclet, M.L. Maspoch, Observation of heterogeneities in elastocaloric natural/wastes rubber composites, Express Polymer Letters 16;12, 1331-1347 (2022), [doi: 10.3144/expresspolymlett.2022.96, LillOA]
  9. M.D. Suttle, L. Daly, R.H. Jones, L. Jenkins, M. Van Ginneken, J.T. Mitchell, J.C. Bridges, L.J. Hicks, D. Johnson, G. Rollinson, R. Taylor, M.J. Genge, C. Schröder, P. Trimby, H. Mansour, S. Piazolo, E. Bonsall, T. Salge, R. Heard, R. Findlay, A.J. King, H.C. Bates, M.R. Lee, N.R. Stephen, F.M. Willcocks, R.C. Greenwood, I.A. Franchi, S.S. Russell, C.S. Harrison, P.F. Schofield, N.V. Almeida, C. Floyd, P. Martin, K.H. Joy, P.J. Wozniakiewicz, D. Hallatt, M.J. Burchell, L.S. Alesbrook, V. Spathis, L.T. Cornwell, A. Dignam, The Winchcombe meteorite—A regolith breccia from a rubble pile CM chondrite asteroid, Meteoritics & Planetary Science (2022), [doi: 10.1111/maps.13938, LillOA]
  10. A.J. King, L. Daly, J. Rowe, K.H. Joy, R.C. Greenwood, H.A. Devillepoix, M.D. Suttle, Q.H. Chan, S.S. Russell, H.C. Bates, J.F. Bryson, P.L. Clay, D. Vida, M.R. Lee, . O’Brien, L.J. Hallis, N.R. Stephen, R. Tartèse, E.K. Sansom, M.C. Towner, M. Cupak, P.M. Shober, P.A. Bland, R. Findlay, I.A. Franchi, A.B. Verchovsky, F.A. Abernethy, M.M. Grady, C.J. Floyd, M. Van Ginneken, J. Bridges, L.J. Hicks, R.H. Jones, J.T. Mitchell, M.J. Genge, L. Jenkins, P.-E. Martin, M.A. Sephton, J.S. Watson, T. Salge, K.A. Shirley, R.J. Curtis, T.J. Warren, N.E. Bowles, F.M. Stuart, L. Di Nicola, D. Györe, A.J. Boyce, K.M. Shaw, T. Elliott, R.C. Steele, P. Povinec, M. Laubenstein, D. Sanderson, A. Cresswell, A.J. Jull, I. Sýkora, S. Sridhar, R.J. Harrison, F.M. Willcocks, C.S. Harrison, D. Hallatt, P.J. Wozniakiewicz, M.J. Burchell, L.S. Alesbrook, A. Dignam, N.V. Almeida, C.L. Smith, B. Clark, E.R. Humphreys-Williams, P.F. Schofield, L.T. Cornwell, V. Spathis, G.H. Morgan, M.J. Perkins, R. Kacerek, P. Campbell-Burns, F. Colas, B. Zanda, P. Vernazza, S. Bouley, S. Jeanne, M. Hankey, G.S. Collins, J.S. Young, C. Shaw, J. Horak, D. Jones, N. James, S. Bosley, A. Shuttleworth, P. Dickinson, I. McMullan, D. Robson, A.R. Smedley, B. Stanley, R. Bassom, M. McIntyre, A.A. Suttle, R. Fleet, L. Bastiaens, M.B. Ihász, S. McMullan, S.J. Boazman, Z.I. Dickeson, P.M. Grindrod, A.E. Pickersgill, C.J. Weir, F.M. Suttle, S. Farrelly, I. Spencer, S. Naqvi, B. Mayne, D. Skilton, D. Kirk, A. Mounsey, S.E. Mounsey, S. Mounsey, P. Godfrey, L. Bond, V. Bond, C. Wilcock, H. Wilcock, R. Wilcock, The Winchcombe meteorite, a unique and pristine witness from the outer solar system, Science Advances 8;46, (2022), [doi: 10.1126/sciadv.abq3925, LillOA]
  11. S. Mechmechani, A. Gharsallaoui, A. Fadel, K. El Omari, S. Khelissa, M. Hamze, N.-E. Chihib, Microencapsulation of carvacrol as an efficient tool to fight Pseudomonas aeruginosa and Enterococcus faecalis biofilms, PLoS ONE 17;7, e0270200 (2022), [doi: 10.1371/journal.pone.0270200, LillOA]
  12. A. Coimbra, J. Sarazin, S. Bourbigot, G. Legros, J.-L. Consalvi, A semi-global reaction mechanism for the thermal decomposition of low-density polyethylene blended with ammonium polyphosphate and pentaerythritol, Fire Safety Journal 133, 103649 (2022), [doi: 10.1016/j.firesaf.2022.103649, LillOA]
  13. M. Boutghatin, Y. Pennec, B. Djafari Rouhani, A. AKJOUJ, V. Gaucher, H. Gidik, S. Alhajj Assaf, M. Carette, V. Thomy, Asymmetric Design for a High‐Performance Indoor Radiative Heating Fabric, Advanced Materials Technologies 7;10, 2101738 (2022), [doi: 10.1002/admt.202101738, LillOA]
  14. L. Leroy, G. Stoclet, J.-M. Lefebvre, V. Gaucher, Mechanical Behavior of Thermoplastic Starch: Rationale for the Temperature-Relative Humidity Equivalence, Polymers 14;13, 2531 (2022), [doi: 10.3390/polym14132531, LillOA]
  15. M. Farin, E. Moulin, L. Chehami, F. Benmeddour, C. Nicard, P. Campistron, O. Bréhault, L. Dupont, Monitoring saltwater corrosion of steel using ultrasonic coda wave interferometry with temperature control, Ultrasonics 124, 106753 (2022), [doi: 10.1016/j.ultras.2022.106753, LillOA]
  16. A. Barrera, C. Binet, F. Dubois, P.-A. Hébert, P. Supiot, C. Foissac, U. Maschke, RECYCLING OF LIQUID CRYSTALS FROM E-WASTE, Detritus 21, 55-61 (2022), [doi: 10.31025/2611-4135/2022.17231, LillOA]
  17. S. Pellerin, F. Samyn, S. Duquesne, V. Landry, Preparation and Characterisation of UV-Curable Flame Retardant Wood Coating Containing a Phosphorus Acrylate Monomer, Coatings 1212, 1850 (2022), [doi: 10.3390/coatings12121850, LillOA]
  18. A. Gossiaux, S. Bellayer, S. Ortgies, T. Wagener, A. König, S. Duquesne, A. Gossiaux, Systematic study of the condensed phase of phosphorus-based flame retarded foams, Polymer Degradation and Stability 206, 110208 (2022), [doi: 10.1016/j.polymdegradstab.2022.110208, LillOA]
  19. T. Noguchi, T. Matsumoto, A. Miyake, Y. Igami, M. Haruta, H. Saito, S. Hata, Y. Seto, M. Miyahara, N. Tomioka, H.A. Ishii, J.P. Bradley, K.K. Ohtaki, E. Dobrică, H. Leroux, C. Le Guillou, D. Jacob, F. de la Peña, S. Laforet, M. Marinova, F. Langenhorst, D. Harries, P. Beck, T.H.V. Phan, R. Rebois, N.M. Abreu, J. Gray, T. Zega, P.-M. Zanetta, M.S. Thompson, R. Stroud, K. Burgess, B.A. Cymes, J.C. Bridges, L. Hicks, M.R. Lee, L. Daly, P.A. Bland, M.E. Zolensky, D.R. Frank, J. Martinez, A. Tsuchiyama, M. Yasutake, J. Matsuno, S. Okumura, I. Mitsukawa, K. Uesugi, M. Uesugi, A. Takeuchi, M. Sun, S. Enju, A. Takigawa, T. Michikami, T. Nakamura, M. Matsumoto, Y. Nakauchi, M. Abe, M. Arakawa, A. Fujii, M. Hayakawa, N. Hirata, N. Hirata, R. Honda, C. Honda, S. Hosoda, Y.-i. Iijima, H. Ikeda, M. Ishiguro, Y. Ishihara, T. Iwata, K. Kawahara, S. Kikuchi, K. Kitazato, K. Matsumoto, M. Matsuoka, Y. Mimasu, A. Miura, T. Morota, S. Nakazawa, N. Namiki, H. Noda, R. Noguchi, N. Ogawa, K. Ogawa, T. Okada, C. Okamoto, G. Ono, M. Ozaki, T. Saiki, N. Sakatani, H. Sawada, H. Senshu, Y. Shimaki, K. Shirai, S. Sugita, Y. Takei, H. Takeuchi, S. Tanaka, E. Tatsumi, F. Terui, R. Tsukizaki, K. Wada, M. Yamada, T. Yamada, Y. Yamamoto, H. Yano, Y. Yokota, K. Yoshihara, M. Yoshikawa, K. Yoshikawa, R. Fukai, S. Furuya, K. Hatakeda, T. Hayashi, Y. Hitomi, K. Kumagai, A. Miyazaki, A. Nakato, M. Nishimura, H. Soejima, A.I. Suzuki, T. Usui, T. Yada, D. Yamamoto, K. Yogata, M. Yoshitake, H.C. Connolly, D.S. Lauretta, H. Yurimoto, K. Nagashima, N. Kawasaki, N. Sakamoto, R. Okazaki, H. Yabuta, H. Naraoka, K. Sakamoto, S. Tachibana, S.-i. Watanabe, Y. Tsuda, A dehydrated space-weathered skin cloaking the hydrated interior of Ryugu, Nature Astronomy 7, 170–181 (2022), [doi: 10.1038/s41550-022-01841-6, LillOA]
  20. K. Demyk, V. Gromov, C. Meny, N. Ysard, D. Paradis, A.P. Jones, D. Petitprez, P. Hubert, H. Leroux, C. Nayral, F. Delpech, Low-temperature optical constants of amorphous silicate dust analogues, Astronomy & Astrophysics 666;A192, (2022), [doi: 10.1051/0004-6361/202243815, LillOA]
  21. L. Krämer Ruggiu, B. Devouard, J. Gattacceca, L. Bonal, H. Leroux, J. Eschrig, D. Borschneck, A. King, P. Beck, Y. Marrocchi, V. Debaille, R. Hanna, O. Grauby, Detection of incipient aqueous alteration in carbonaceous chondrites, Geochimica et Cosmochimica Acta 336, 308-331 (2022), [doi: 10.1016/j.gca.2022.09.020, LillOA]
  22. A.-M. Seydoux-Guillaume, T. de Resseguier, G. Montagnac, S. Reynaud, H. Leroux, B. Reynard, A. Cavosie, T. de Resseguier, Bridging the shocked monazite gap – Deformation microstructures in natural and laser shock-loaded samples, Earth and Planetary Science Letters 595, 117727 (2022), [doi: 10.1016/j.epsl.2022.117727, LillOA]
  23. E. Osei-Agyemang, J.-F. Paul, R. Lucas, S. Foucaud, S. Cristol, A.-S. Mamede, N. Nuns, A. Addad, Characterizing the ZrC(111)/c-ZrO2(111) Hetero-Ceramic Interface: First Principles DFT and Atomistic Thermodynamic Modeling, Molecules 27;9, 2954 (2022), [doi: 10.3390/molecules27092954, LillOA]
  24. Y. Tsumura, K. Oyama, A.-L. Fameau, M. Seike, A. Ohtaka, T. Hirai, Y. Nakamura, S. Fujii, Y. Tsumura, Photo/Thermo Dual Stimulus-Responsive Liquid Marbles Stabilized with Polypyrrole-Coated Stearic Acid Particles, ACS Applied Materials & Interfaces 14;36, 41618-41628 (2022), [doi: 10.1021/acsami.2c12681, LillOA]
  25. J. Bassut, K. Nasr, G. Stoclet, M. Bria, J.-M. Raquez, A. Huret, R. Wojcieszak, P. Zinck, I. Itabaiana Junior, J. Bassut, Lipase-Catalyzed Synthesis of Biobased Polyesters Containing Levoglucosan Units, ACS Sustainable Chemistry & Engineering 10;50, 16845–16852 (2022), [doi: 10.1021/acssuschemeng.2c05258, LillOA]
  26. C. Mongioví, G. Crini, X. Gabrion, V. Placet, V. Blondeau-Patissier, A. Krystianiak, S. Durand, J. Beaugrand, A. Dorlando, C. Rivard, L. Gautier, A.R.L. Ribeiro, D. Lacalamita, B. Martel, J.-N. STAELENS, A. Ivanovska, M. Kostić, O. Heintz, C. Bradu, M. Raschetti, N. Morin-Crini, Revealing the adsorption mechanism of copper on hemp-based materials through EDX, nano-CT, XPS, FTIR, Raman, and XANES characterization techniques, Chemical Engineering Journal Advances 10, 100282 (2022), [doi: 10.1016/j.ceja.2022.100282, LillOA]
  27. C. Mongioví, D. Lacalamita, N. Morin-Crini, X. Gabrion, V. Placet, A.R.L. Ribeiro, A. Ivanovska, M. Kostić, C. Bradu, J.-N. STAELENS, B. Martel, M. Raschetti, G. Crini, Use of chènevotte, a valuable co-product of industrial hemp fiber, as adsorbent for copper ions: Kinetic studies and modeling, Arabian Journal of Chemistry 15;4, 103742 (2022), [doi: 10.1016/j.arabjc.2022.103742, LillOA]
  28. F. Xiao, G. Fontaine, K. Li, S. Bourbigot, Combination effect of zinc borate in intumescent polybutylene succinate systems: Study of the carbonaceous structures using solid-state NMR, Polymer Degradation and Stability 110192 (2022), [doi: 10.1016/j.polymdegradstab.2022.110192, LillOA]
  29. M. Fleurotte, O. Authier, S. Bourbigot, G. Fontaine, G. Debenest, A. Amokrane, Sensitivity analysis applied to the pyrolysis of charring and non-charring materials under a cone calorimeter, Journal of Fire Sciences 40;6, 405-443 (2022), [doi: 10.1177/07349041221134486, LillOA]
  30. S. Tretsiakova-McNally, A. Baby, P. Joseph, D. Pospiech, E. Schierz, A. Lederer, M. Arun, G. Fontaine, Gaseous- and Condensed-Phase Activities of Some Reactive P- and N-Containing Fire Retardants in Polystyrenes, Molecules 28;1, 278 (2022), [doi: 10.3390/molecules28010278, LillOA]
  31. Z. Zhang, Y. Zhang, A. Barras, A. Addad, P. Roussel, L.C. Tang, M.A. Amin, S. Szunerits, R. Boukherroub, Preparation of Flower-Shaped Co-Fe Layer Double Hydroxide Nanosheets Loaded with Pt Nanoparticles by Corrosion Engineering for Efficient Electrocatalytic Water Splitting, ACS APPLIED ENERGY MATERIALS (2022), [doi: 10.1021/acsaem.2c02905, LillOA]
  32. T. Rongthong, A. Qnouch, M.M. Gehrke, F. Danede, J.-F. Willart, P.F.M. De Oliveira, L. Paccou, G. Tourrel, P. Stahl, J. Verin, P. Toulemonde, C. Vincent, F. Siepmann, J. Siepmann, Long term behavior of dexamethasone-loaded cochlear implants: In vitro & in vivo, International Journal of Pharmaceutics: X 4, 100141 (2022), [doi: 10.1016/j.ijpx.2022.100141, LillOA]
  33. K. Belkhir, O. Cerlati, D. Heaugwane, A. Tosi, T. Benkhaled, P.-L. Brient, C. Chatard, A. Graillot, S. Catrouillet, S. Balor, D. Goudounèche, B. Payré, P. Laborie, J.-H. Lim, J.-L. Putaux, P. Vicendo, L. Gibot, B. Lonetti, A.-F. Mingotaud, V. Lapinte, Synthesis and Self-Assembly of UV-Cross-Linkable Amphiphilic Polyoxazoline Block Copolymers: Importance of Multitechnique Characterization, Langmuir 38;51, 16144-16155 (2022), [doi: 10.1021/acs.langmuir.2c02896, LillOA]
  34. S. Defrancois, V. Bouad, P. Woisel, J. Lyskawa, Thermoresponsive catechol end‐functionalized polymers/CBPQT 4+, 4Cl − supramolecular assembly, Journal of Polymer Science (2022), [doi: 10.1002/pol.20220572, LillOA]
  35. L. De Smet, K. Belal, A. Vebr, J. Lyskawa, F. Stoffelbach, R. Hoogenboom, P. Woisel, Covalent Hydrogels with Dual Temperature and Time Memory Function Based on Supramolecular Host–Guest Complexation, ACS Materials Letters 5;1, 235-242 (2022), [doi: 10.1021/acsmaterialslett.2c00817, LillOA]
  36. M. Soula, J. Profili, W. Caceres‐Ferreira, F. Samyn, S. Duquesne, E.V. Falzacappa, P. Scopece, G. Laroche, V. Landry, Effect of a thin organosilicon layer prepared by atmospheric pressure plasma on wood flame retardancy, Plasma Processes and Polymers 19;11, 2200051 (2022), [doi: 10.1002/ppap.202200051, LillOA]
  37. M. Diop, O. Thioune, C. Neut, M. Maton, C. Riviere, B. Martel, S. Mahieux, V. Roumy, N. Blanchemain, In vitro evaluation of antibacterial activity of a plant extract-loaded wound dressing, Journal of Drug Delivery Science and Technology 67, (2022), [doi: 10.1016/j.jddst.2021.102950, LillOA]
  38. M. Saab, F. Chai, B. Martel, N. Blanchemain, Materials Enhancing ACL Tendon Graft to Bone Healing Show Favorable Results, In Animal Models, In Vivo : A Systematic Review, Arthroscopy 39;2, 529-548 (2022), [doi: 10.1016/j.arthro.2022.05.011, LillOA]
  39. E. Geiger, C. Guéneau, T. Alpettaz, C. Bonnet, S. Chatain, O. Tougait, D. Menut, S. Bellayer, M. Hunault, E. Corcoran, Fission products chemistry in simulated PWR fuel up to 2100C: Experimental characterisation and TAF-ID modelling, Journal of Nuclear Materials 572, 154040 (2022), [doi: 10.1016/j.jnucmat.2022.154040, LillOA]
  40. V. Thiery, E. Dubois, S. Bellayer, The good, the bad and the ugly polishing: Effect of abrasive size on standardless EDS analysis of Portland cement clinker's calcium silicates, Micron 158, 103266 (2022), [doi: 10.1016/j.micron.2022.103266, LillOA]
  41. S. Bellayer, A. Gossiaux, S. Duquesne, B. Dewailly, P. Bachelet, M. Jimenez, A. Gossiaux, Transparent fire protective sol-gel coating for wood panels, Polymer testing 110, 107579 (2022), [doi: 10.1016/j.polymertesting.2022.107579, LillOA]
  42. W. Liu, Y. Feng, F. Pan, R. Jeantet, C. Andre, X.D. Chen, G. Delaplace, Effect of calcium on the thermal denaturation of whey proteins and subsequent fouling in a benchtop fouling device: An experimental and numerical approach, FOOD AND BIOPRODUCTS PROCESSING 136, (2022), [doi: 10.1016/j.fbp.2022.09.002, LillOA]
  43. J.S. Guez, F. Coucheney, J. Castéra-Guy, M. Bechet, P. Fontanille, N.-E. Chihib, J. Niehren, F. Coutte, P. Jacques, Bioinformatics modelling and metabolic engineering of thebranched chain amino acid pathway for specific production of mycosubtilin isoforms in Bacillus subtilis, Metabolites (2022), [doi: 10.3390/metabo12020107, LillOA]
  44. M. Deleplace, H. Dallagi, T. Dubois, E. Richard, A. Ipatova, T. Benezech, C. Faille, Structure of deposits formed by drying of droplets contaminated with Bacillus spores determines their resistance to rinsing and cleaning, Journal of Food Engineering 318, (2022), [doi: 10.1016/j.jfoodeng.2021.110873, LillOA]
  45. G.-F. Bouobda Moladje, L. Thuinet, C. Becquart, A. Legris, Radiation induced segregation near dislocations and symmetric tilt grain boundaries in Fe-Cr alloys: A phase-field study, Acta Materialia 225, 117523 (2022), [doi: 10.1016/j.actamat.2021.117523, LillOA]
  46. C. Lapointe, T.D. Swinburne, L. Proville, C. Becquart, N. Mousseau, M.-C. Marinica, Machine learning surrogate models for strain-dependent vibrational properties and migration rates of point defects, Physical Review Materials 6;11, 113803 (2022), [doi: 10.1103/physrevmaterials.6.113803, LillOA]
  47. Y. Guinet, L. Paccou, F. Danede, P. Derollez, A. Hedoux, Identification of incommensurability in L-leucine: can lattice instabilities be considered as general phenomena in hydrophobic amino acids?, Physical Chemistry Chemical Physics 24, 27023-27030 (2022), [doi: 10.1039/d2cp00989g, LillOA]
  48. M. Dounya, U. Maschke, N. Bouchikhi, H. Ziani Chérif, L. Bedjaoui-Alachaher, Characterization of swelling behavior and elastomer properties of acrylate polymers containing 2-ethylhexyl and isobornyl esters, Polymer Bulletin (2022), [doi: 10.1007/s00289-022-04491-w, LillOA]
  49. A. Zennaki, L. Zair, K. Arabeche, L. Benkraled, U. Maschke, A. Berrayah, Effect of annealing on thermal and dynamic mechanical properties of poly(lactic acid), Journal of Applied Polymer Science 139;44, e53095 (2022), [doi: 10.1002/app.53095, LillOA]
  50. H. Boughrara, S. Djellali, N. Haddaoui, J.-N. STAELENS, P. Supiot, U. Maschke, A facile route to improve compatibilization of low density polyethylene/poly (ε-caprolactone) blends, Polymer Degradation and Stability 204, 110111 (2022), [doi: 10.1016/j.polymdegradstab.2022.110111, LillOA]
  51. N. Zeggai, Z. Bouberka, F. Dubois, L. Bedjaoui, T. Bouchaour, C.-E. Gherdaoui, J. Potier, P. Supiot, U. Maschke, Tuning of thermally-induced shape memory properties of low-cost biocompatible linear and chemically crosslinked isobornyl/isobutylacrylate copolymers, COMPOSITES SCIENCE AND TECHNOLOGY 219, 109213 (2022), [doi: 10.1016/j.compscitech.2021.109213, LillOA]
  52. C.-E. Gherdaoui, Z. Bouberka, J.-P. Delbarre, O. Hutin, R. Sansano, L. Leclercq, P. Supiot, U. Maschke, A simple and reliable method for separation of mineral oil/polychlorobiphenyl mixtures, Waste Management and Research 0734242X2211054 (2022), [doi: 10.1177/0734242x221105436, LillOA]
  53. S. Hamri, T. Bouchaour, D. Lerari, Z. Bouberka, P. Supiot, U. Maschke, Cleaning of Wastewater Using Crosslinked Poly(Acrylamide-co-Acrylic Acid) Hydrogels: Analysis of Rotatable Bonds, Binding Energy and Hydrogen Bonding, Gels 8;3, 156 (2022), [doi: 10.3390/gels8030156, LillOA]
  54. I. Moundoungou, Z. Bouberka, G.-J. Fossi Tabieguia, A.-L. Barrera Almeida, Y. Derouiche, F. Dubois, P. Supiot, C. Foissac, U. Maschke, Y. Derouiche, End-of-Life Liquid Crystal Displays Recycling: Physico-Chemical Properties of Recovered Liquid Crystals, Crystals 12;11, 1672 (2022), [doi: 10.3390/cryst12111672, LillOA]
  55. L. Zair, A. Berrayah, K. Arabeche, Z. Bouberka, A. Best, K. Koynov, U. Maschke, Temperature Controlled Mechanical Reinforcement of Polyacrylate Films Containing Nematic Liquid Crystals, Polymers 14;22, 5024 (2022), [doi: 10.3390/polym14225024, LillOA]
  56. J. Ingrin, Editorial: Dreaming about the future publishing system…, Elements 18;3, 201-203 (2022), [doi: 10.2138/gselements.18.3.201, LillOA]
  57. E. Kolesnikov, I. Kupenko, M. Achorner, C. Plückthun, H.-P. Liermann, S. Merkel, C. Sanchez-Valle, Strength and seismic anisotropy of textured FeSi at planetary core conditions, Frontiers in Earth Science 10, 974148 (2022), [doi: 10.3389/feart.2022.974148, LillOA]
  58. M. Rolland, A. Borgenstam, Modeling precipitation kinetics in multicomponent alloys during deformation, Frontiers in Materials (2022), [doi: 10.3389/fmats.2022.958472, LillOA]
  59. S. Kaidi, F. Bentiss, c. Jama, K. Khaya, Z. Belattmania, A. Reani, B. Sabour, Isolation and Structural Characterization of Alginates from the Kelp Species Laminaria ochroleuca and Saccorhiza polyschides from the Atlantic Coast of Morocco, Colloids and Interfaces 6;4, 51 (2022), [doi: 10.3390/colloids6040051, LillOA]
  60. J. Zhang, Y. Jiang, C. Hu, G. Ji, C. Song, Q. Zhai, J. Zhang, Effect of Cr on Phase Transformation Behavior of Austenite in Fe-20Mn-9Al-1.2C-xCr Low-Density Steels During Isothermal Aging, Metals and Materials International 28;11, 2583-2595 (2022), [doi: 10.1007/s12540-022-01167-y, LillOA]
  61. X. Dong, L. Feng, S. Wang, F. Wang, R. Ghasemi, G. Ji, E.A. Nyberg, S. Ji, A quantitative strategy for achieving the high thermal conductivity of die-cast Mg-Al-based alloys, Materialia 22, 101426 (2022), [doi: 10.1016/j.mtla.2022.101426, LillOA]
  62. V. Bouad, K. Ohno, A. Addad, A. Marin, N. Donzel, S. Barrau, J. Lyskawa, V. Ladmiral, Surface-initiated reversible addition fragmentation chain transfer of fluoromonomers: an efficient tool to improve interfacial adhesion in piezoelectric composites, Polymer Chemistry 13;42, 6061-6072 (2022), [doi: 10.1039/d2py00825d, LillOA]
  63. J. Ingrin, Back to basics on scientific publishing, Elements 18;2, 127 (2022), [LillOA]
  64. W. Al Garadi, K. Jrajri, M. El Faydy, F. Benhiba, L. El Ghayati, N. Sebbar, E. Essassi, I. Warad, A. Guenbour, A. Bellaouchou, C. Jama, A. Alsalme, A. Zarrouk, 4-phenyl-decahydro-1H-1,5-benzodiazepin-2-one as novel and effective corrosion inhibitor for carbon steel in 1 M HCl solution: A combined experimental and empirical studies, Journal of the Indian Chemical Society 99;11, 100742 (2022), [doi: 10.1016/j.jics.2022.100742, LillOA]
  65. T. Stasiak, M.-A. Sow, M. Touzin, f. béclin, C. CORDIER, Preparation and characterisation of the Al-Cr-Fe-Mn-Mo high-entropy alloy reinforced by in-situ formed carbides, Philosophical Magazine Letters (2022), [doi: 10.1080/09500839.2022.2134938, LillOA]
  66. S. Chemchoub, A. El Attar, L. Oularbi, S.A. Younssi, F. Bentiss, c. Jama, M. El Rhazi, F. Bentiss, Electrosynthesis of eco-friendly electrocatalyst based nickel-copper bimetallic nanoparticles supported on poly-phenylenediamine with highest current density and early ethanol oxidation onset potential, International Journal of Hydrogen Energy (2022), [doi: 10.1016/j.ijhydene.2022.09.069, LillOA]
  67. F. Ezzahra Yatim, I. Boumanchar, B. Srhir, Y. Chhiti, c. Jama, F. Ezzahrae M'hamdi Alaoui, Waste-to-energy as a tool of circular economy: Prediction of higher heating value of biomass by artificial neural network (ANN) and multivariate linear regression (MLR), Waste Management 153, 293-303 (2022), [doi: 10.1016/j.wasman.2022.09.013, LillOA]
  68. C. Bassand, L. Benabed, J. Verin, F. Danede, L. Lefol, J.-F. willart, F. Siepmann, J. Siepmann, L. Benabed, Hot melt extruded PLGA implants loaded with ibuprofen: How heat exposure alters the physical drug state, Journal of Drug Delivery Science and Technology 73, 103432 (2022), [doi: 10.1016/j.jddst.2022.103432, LillOA]
  69. J.-F. willart, S. Ouerghemmi, N. Descamps, P. Heijboer, L. Paccou, F. Danede, M. Descamps, The melting of glucose, International Journal of Pharmaceutics 626, 122185 (2022), [doi: 10.1016/j.ijpharm.2022.122185, LillOA]
  70. K. Gouriet, P. Roussel, P. Carrez, P. Cordier, Ultimate mechanical properties of enstatite, Physics and chemistry of minerals 49;30, (2022), [doi: 10.1007/s00269-022-01206-5, LillOA]
  71. V. Bouad, A. Fadel, S. Mohan, A. Hamieh, J.-F. Tahon, J. Lyskawa, P. Woisel, A. Da Costa, A. Ferri, R. Desfeux, F. Ponchel, D. Remiens, V. Ladmiral, S. Barrau, Utilization of Catechol End-Functionalized PMMA as a Macromolecular Coupling Agent for Ceramic/Fluoropolymer Piezoelectric Composites, ACS Applied Polymer Materials 4;10, 7258–7267 (2022), [doi: 10.1021/acsapm.2c00883, LillOA]
  72. R. Besson, S. Macaluso, L. Thuinet, Critical issues on coherent interface energy calculations revisited: The case of Al/TiB2, Surfaces and Interfaces 33, 102272 (2022), [doi: 10.1016/j.surfin.2022.102272, LillOA]
  73. M. Krug, M. Saki, E. Ledoux, J.-P. Gay, J. Chantel, A. Pakhomova, R. Husband, A. Rohrbach, S. Klemme, C. Thomas, S. Merkel, C. Sanchez‐Valle, Textures Induced by the Coesite‐Stishovite Transition and Implications for the Visibility of the X‐Discontinuity, Geochemistry, Geophysics, Geosystems 23;10, e2022GC010544 (2022), [doi: 10.1029/2022gc010544, LillOA]
  74. A. Bakhtiar, Z. Bouberka, P. Roussel, C. Volkringer, A. Addad, B. OUDDANE, C. Pierlot, U. Maschke, Development of a TiO2/sepiolite photocatalyst for the degradation of a persistent organic pollutant in aqueous solution, Nanomaterials (Basel, Switzerland) 12;19, 3313 (2022), [doi: 10.3390/nano12193313, LillOA]
  75. S. Jerdioui, L. Elansari, N. Jaradat, S. Jodeh, K. Azzaoui, B. Hammouti, M. Lakrat, A. Tahani, c. Jama, F. Bentiss, Effects of gallic acid on the nanocrystalline hydroxyapatite formation using the neutralization process, Journal of Trace Elements and Minerals 100009 (2022), [doi: 10.1016/j.jtemin.2022.100009, LillOA]
  76. Y. Zouhri, J.-M.M. Berthé, F. Bonnet, B. Stasik, C. Colemonts, T. Lasuye, A. Mortreux, Y. Champouret, M. Visseaux, J.-M.M. Berthé, Ferrocene/ferrocenium redox shuttling: Peroxide decomposition catalysis applied to vinyl monomers polymerization under suspension conditions, Polymer 260, 125368 (2022), [doi: 10.1016/j.polymer.2022.125368, LillOA]
  77. H. Guo, G. Le Fer, T.N. Tran, a. Malfait, D. Hourdet, A. Marcellan, F. Stoffelbach, J. Lyskawa, R. Hoogenboom, P. Woisel, Mechanism insights in controlling host–guest (de)complexation by thermoresponsive polymer phase transitions, Polymer Chemistry 13;25, 3742-3749 (2022), [doi: 10.1039/d2py00219a, LillOA]
  78. A. Boidot, F. Gheno, F. Bentiss, c. Jama, J.-B. Vogt, A. Boidot, Effect of Aluminum Flakes on Corrosion Protection Behavior of Water-Based Hybrid Zinc-Rich Coatings for Carbon Steel Substrate in NaCl Environment, Coatings 12;10, 1390 (2022), [doi: 10.3390/coatings12101390, LillOA]
  79. A. Dimou, P. Hirel, A. Grünebohm, Pinning of domain walls by strontium layer in the BaTiO3 perovskite: An atomic-scale study, Physical Review B 106;9, 094104 (2022), [doi: 10.1103/physrevb.106.094104, LillOA]
  80. H. Fakhry, M. El Faydy, F. Benhiba, M. Bouassiria, T. Laabaissi, M. Allali, R. Touir, H. Oudda, c. Jama, I. Warad, A. Alsalme, A. Zarrouk, Experimental, DFT studies and molecular dynamic simulation on the corrosion inhibition of carbon steel in 1 M HCl by two newly synthesized 8-hydroxyquinoline derivatives, Journal of the Indian Chemical Society 100701 (2022), [doi: 10.1016/j.jics.2022.100701, LillOA]
  81. M. Chafi, S. Byadi, A. Barhoumi, W. Limouni, A. Tizliouine, c. Jama, L. El Hachemi Omari, Study of copper removal by modified biomaterials using the response surface methodology, DFT Calculation, and molecular dynamic simulation, Journal of Molecular Liquids 363, 119799 (2022), [doi: 10.1016/j.molliq.2022.119799, LillOA]
  82. Y. HARMEN, Y. Chhiti, M. El Fiti, M. Salihi, c. Jama, Eccentricity Optimisation of Annular Multi-Tube Storage Unit with Phase Change Material, SSRN Electronic Journal (2022), [doi: 10.2139/ssrn.4220792, LillOA]
  83. B.T. Benkhaled, K. Belkhir, T. Brossier, C. Chatard, A. Graillot, B. Lonetti, A.-F. Mingotaud, S. Catrouillet, S. Blanquer, V. Lapinte, 3D fabrication of Shape-Memory polymer networks based on coumarin Photo-Dimerization, European Polymer Journal 179, 111570 (2022), [doi: 10.1016/j.eurpolymj.2022.111570, LillOA]
  84. B. Campos, G. Fontaine, S. Bourbigot, G. Stoclet, F. Bonnet, Poly(L-lactide-co-ε-caprolactone)-matrix composites produced in one step by in situ polymerization in TP-RTM, ACS Applied Polymer Materials (2022), [doi: 10.1021/acsapm.2c01056, LillOA]
  85. P. Hirel, P. Carrez, P. Cordier, Why do compact grain boundary complexions prevail in rock-salt materials?, Acta Materialia 118297 (2022), [doi: 10.1016/j.actamat.2022.118297, LillOA]
  86. G. Fontaine, V. Marchetti, S. Bourbigot, Effects of accelerated and natural weathering on fire-retarded industrial wood composite, Journal of Fire Sciences 1-18 (2022), [doi: 10.1177/07349041221102059, LillOA]
  87. Y. Santana, M.-A. Sow, C. Nouvellon, C. Cordier, f. Béclin, M. Touzin, A. Tromont, X. Noirfalise, L. Boilet, J. Trelcat, M. Dubar, H. Morvan, M. Bigerelle, Influence of powder mixing method on properties of high entropy alloys of FeCrMnAlMo thin coatings obtained by magnetron sputtering, Surface and Coatings Technology 446, 128744 (2022), [doi: 10.1016/j.surfcoat.2022.128744, LillOA]
  88. H. Idrissi, A. Béché, N. Gauquelin, I. Ul-Haq, C. Bollinger, S. Demouchy, J. Verbeeck, T. Pardoen, D. Schryvers, P. Cordier, On the formation mechanisms of intragranular shear bands in olivine by stress-induced amorphization, Acta Materialia 239, 118247 (2022), [doi: 10.1016/j.actamat.2022.118247, LillOA]
  89. .A. Restrepo, . Arnache, J. Restrepo, C. Becquart, N. Mousseau, Structural modeling of ZnFe2O4 systems using Buckingham potentials with static molecular dynamics, Solid State Communications 114914 (2022), [doi: 10.1016/j.ssc.2022.114914, LillOA]
  90. J. Feng, Z. Ma, Z. Xu, H. Xie, Y. Lu, C. Maluk, P. Song, S. Bourbigot, H. Wang, A Si-containing polyphosphoramide via green chemistry for fire-retardant polylactide with well-preserved mechanical and transparent properties, Chemical Engineering Journal 431;3, 134259 (2022), [doi: 10.1016/j.cej.2021.134259, LillOA]
  91. X. Wu, S. Bourbigot, K. Li, Y. Zou, Co-pyrolysis characteristics and flammability of polylactic acid and acrylonitrile-butadiene-styrene plastic blend using TG, temperature-dependent FTIR, Py-GC/MS and cone calorimeter analyses, Fire Safety Journal 103543 (2022), [doi: 10.1016/j.firesaf.2022.103543, LillOA]
  92. X. Wang, Y. Li, D. Meng, X. Gu, J. Sun, Y. Hu, S. Bourbigot, S. Zhang, A Review on Flame-Retardant Polyvinyl Alcohol: Additives and Technologies, Polymer Reviews 1-41 (2022), [doi: 10.1080/15583724.2022.2076694, LillOA]
  93. K. Zhang, H. Liu, J. Ingrin, B. Zhang, X. Yang, Chemical diffusion of fluorine in phlogopite, Geochimica et Cosmochimica Acta 303, 95-106 (2022), [doi: 10.1016/j.gca.2022.06.039, LillOA]
  94. .A. Restrepo, . Arnache, J. Restrepo, C. Becquart, N. Mousseau, Comparison of bulk basic properties with different existing Ni-Fe-O empirical potentials for Fe3O4 and NiFe2O4 spinel ferrites, Computational Materials Science 111653 (2022), [doi: 10.1016/j.commatsci.2022.111653, LillOA]
  95. A. SRIBA, J. Bouquerel, J.-B. Vogt, DIC‑aided analysis of the fatigue behaviour of a welded 316L stainless steel, Welding in the World 66, 1915–1927 (2022), [doi: 10.1007/s40194-022-01355-9, LillOA]
  96. K. Nasr, A. Huret, R. Mincheva, G. Stoclet, M. Bria, J.-M. Raquez, P. Zinck, The Impact of Diethyl Furan-2,5-dicarboxylate as an Aromatic Biobased Monomer toward Lipase-Catalyzed Synthesis of Semiaromatic Copolyesters, ACS Applied Polymer Materials 4;2, 1387-1400 (2022), [doi: 10.1021/acsapm.1c01777, LillOA]
  97. J.-P. Perrillat, B. Tauzin, J. Chantel, J. Jonfal, I. Daniel, Z. Jing, Y. Wang, Shear wave velocities across the olivine – wadsleyite – ringwoodite transitions and sharpness of the 410 km seismic discontinuity, Earth and Planetary Science Letters 593, 117690 (2022), [doi: 10.1016/j.epsl.2022.117690, LillOA]
  98. K. Koperwas, F. Kaśkosz, A. Grzybowski, M. Paluch, F. Affouard, The role of the diffusion in the predictions of the classical nucleation theory for quasi-real systems differ in dipole moment value, Scientific Reports 12;1, (2022), [doi: 10.1038/s41598-022-13715-y, LillOA]
  99. A. Krupa, F. Danede, A. Węgrzyn, D. Majda, J.-F. willart, Thinking of bosentan repurposing – A study on dehydration and amorphization, International Journal of Pharmaceutics 622, 121846 (2022), [doi: 10.1016/j.ijpharm.2022.121846, LillOA]
  100. A. Dupont, M. Guerain, F. Danede, J.-F. willart, Evidence of transient amorphization during the polymorphic transformation of sorbitol induced by milling, International Journal of Pharmaceutics 121929 (2022), [doi: 10.1016/j.ijpharm.2022.121929, LillOA]
  101. D. Merah, L. Bedjaoui, N. Zeggai, Z. Bouberka, J. Sarazin, D. Boutalbi, A. Barrera, H. Boughrara, F. Dubois, F. Cazaux, P. Supiot, U. Maschke, Enhanced thermal stability of biobased crosslinked poly (isobornylacrylate-co-2-ethylhexylacrylate) copolymers, Journal of Polymer Research 29;7, (2022), [doi: 10.1007/s10965-022-03139-7, LillOA]
  102. M. Ciocco, M. Roskosz, B. Doisneau, O. Beyssac, S. Mostefaoui, L. Remusat, H. Leroux, M. Gounelle, Impact dynamics of the L chondrites' parent asteroid, Meteoritics and Planetary Science 57;4, 759-775 (2022), [doi: 10.1111/maps.13793, LillOA]
  103. S. Rubino, S. Potin, C. Lantz, D. Baklouti, P. Beck, O. Brissaud, H. Leroux, E. Quirico, B. Schmitt, F. Borondics, R. Brunetto, Geometry induced bias in the remote near-IR identification of phyllosilicates on space weathered bodies, Icarus 114887 (2022), [doi: 10.1016/j.icarus.2022.114887, LillOA]
  104. I. Proriol Serre, J.-B. Vogt, Mechanical behavior in liquid lead of Al2O3 coated 15-15Ti steel and an Alumina-Forming Austenitic steel designed to mitigate their corrosion, Engineering Failure Analysis 139, (2022), [doi: 10.1016/j.engfailanal.2022.106443, LillOA]
  105. J. Lu, L. Li, P. Jiang, Z. Chen, G. Fontaine, Y. Zhang, G. Yu, S. Bourbigot, Flammability properties of intumescent vinyl acetate–ethylene copolymer emulsion including natural carbonization agent, Polymer 245, 124709 (2022), [doi: 10.1016/j.polymer.2022.124709, LillOA]
  106. M. Landeiro Dos Reis, Y. Giret, P. Carrez, P. Cordier, Y. Giret, Efficiency of the vacancy pipe diffusion along an edge dislocation in MgO, Computational Materials Science 211, 111490 (2022), [doi: 10.1016/j.commatsci.2022.111490, LillOA]
  107. K. Belkhir, G. Riquet, F. Becquart, G. Riquet, Polymer Processing under Microwaves, Advances in Polymer Technology 2022, 1-21 (2022), [doi: 10.1155/2022/3961233, LillOA]
  108. J. Furstoss, P. Hirel, P. Carrez, P. Cordier, Complexions and stoichiometry of the 60.8°//[100](011) symmetrical tilt grain boundary in Mg2SiO4 forsterite: a combined empirical potential and first-principles study, American Mineralogist (2022), [doi: 10.2138/am-2022-8420, LillOA]
  109. M. El Fiti, M. Salihi, Y. Harmen, Y. Chhiti, A. Chebak, F.E. M'Hamdi Alaoui, M. Achak, F. Bentiss, C. Jama, Energetic performance optimization of a coaxial phase change material (PCM) regenerator, Journal of Energy Storage 50, 104571 (2022), [doi: 10.1016/j.est.2022.104571, LillOA]
  110. E. Ledoux, F. Lin, L. Miyagi, A. Addad, A. Fadel, D. Jacob, f. béclin, S. Merkel, Deformation of Polycrystalline MgO Up to 8.3 GPa and 1270 K: Microstructures, Dominant Slip-Systems, and Transition to Grain Boundary Sliding, Frontiers in Earth Science 10, 849777 (2022), [doi: 10.3389/feart.2022.849777, LillOA]
  111. J. Sun, Y. Yang, J. Ingrin, Z. Wang, Q. Xia, Impact of fluorine on the thermal stability of phlogopite, American Mineralogist 107, 815-825 (2022), [doi: 10.2138/am-2022-8051, LillOA]
  112. B. Yue, M. Krug, C. Sanchez-Valle, S. Merkel, F. Hong, C. Sanchez-Valle, Deformation and slip systems of CaCl2-type MnO2 under high pressure, Physical Review Materials 6, 053603 (2022), [doi: 10.1103/physrevmaterials.6.053603, LillOA]
  113. F. Xiao, G. Fontaine, S. Bourbigot, Improvement of Flame Retardancy and Antidripping Properties of Intumescent Polybutylene Succinate Combining Piperazine Pyrophosphate and Zinc Borate, ACS Applied Polymer Materials 4;3, 1911-1921 (2022), [doi: 10.1021/acsapm.1c01755, LillOA]
  114. F. Xiao, G. Fontaine, S. Bourbigot, A highly efficient intumescent polybutylene succinate: Flame retardancy and mechanistic aspects, Polymer Degradation and Stability 196, 109830 (2022), [doi: 10.1016/j.polymdegradstab.2022.109830, LillOA]
  115. S. Chatenet, O. Authier, S. Bourbigot, G. Fontaine, Reaction to fire of polymethylmethacrylate and polyvinylchloride under reduced oxygen concentrations in a controlled-atmospherecone calorimeter, Journal of Fire Sciences 1-19 (2022), [doi: 10.1177/07349041221092968, LillOA]
  116. H. Lopes Joao, N. Tabary, J. Hernandez-Montelongo, Editorial: Biomacromolecules Systems Applied to Medical Implants for the Release of Therapeutic Agents, Frontiers in Bioengineering and Biotechnology 10, (2022), [doi: 10.3389/fbioe.2022.910203, LillOA]
  117. E. Bakangura, D. Fournier, F. Coumes, P. Woisel, D. Grande, B. Le Droumaguet, Functional nanoporous materials from boronate-containing stimuli-responsive diblock copolymers, Polymer Chemistry 13;20, 2907-2917 (2022), [doi: 10.1039/d2py00237j, LillOA]
  118. X. Dong, L. Feng, S. Wang, G. Ji, A. Addad, H. Yang, E.A. Nyberg, S. Ji, On the exceptional creep resistance in a die-cast Gd-containing Mg alloy with Al addition, Acta Materialia 232, 117957 (2022), [doi: 10.1016/j.actamat.2022.117957, LillOA]
  119. I.M. Oliveira Anício Costa, M. Batková, I. Batko, A. Benabou, C. Mesplont, J.-B. Vogt, The Influence of Microstructure on the Electromagnetic Behavior of Carbon Steel Wires, Crystals 12;5, 576 (2022), [doi: 10.3390/cryst12050576, LillOA]
  120. M. Louati, S. Barrau, J.-F. Tahon, A. Brosseau, M. Takao, M. Takeshita, R. Métivier, G. Buntinx, S. Aloise, Is it possible to maintain photomechanical properties of crystalline diarylethenes after thermal amorphization?, Journal of Molecular Structure 1261, 132857 (2022), [doi: 10.1016/j.molstruc.2022.132857, LillOA]
  121. M. Lloyd, A. London, J. Haley, M. Gilbert, C. Becquart, C. Domain, E. Martinez, M. Moody, P. Bagot, D. Nguyen-Manh, D. Armstrong, Interaction of transmutation products with precipitates, dislocations and grain boundaries in neutron irradiated W, Materialia 101370 (2022), [doi: 10.1016/j.mtla.2022.101370, LillOA]
  122. K. Wu, S. Feng, A. Hedoux, E. Shalaev, Water structure in glycerol: Spectroscopic and computer simulation investigation of hydrogen bonding and water clustering, Journal of Molecular Liquids 355, 118916 (2022), [doi: 10.1016/j.molliq.2022.118916, LillOA]
  123. M. Khair, F. Housaer, N. Hibert, J. Allenou, A. Addad, f. béclin, M. Touzin, A. Leenaers, H. Palancher, B. Stepnik, O. Tougait, F. Housaer, Morphological and microstructural characterizations of the fresh fuel plates for the SEMPER FIDELIS in-pile test, Journal of Nuclear Materials 563, 153656 (2022), [doi: 10.1016/j.jnucmat.2022.153656, LillOA]
  124. M.-N. Avettand-Fènoël, N. Netto, A. Simar, M. Marinova, R. Taillard, Design of a metallic glass dispersion in pure copper by friction stir processing, Journal of Alloys and Compounds 907, 164522 (2022), [doi: 10.1016/j.jallcom.2022.164522, LillOA]
  125. B. Campos, G. Fontaine, S. Bourbigot, F. Bonnet, Thermoplastic matrix-based composites produced by resin transfer molding: A review, Polymer Composites 43, 2485-2506 (2022), [doi: 10.1002/pc.26575, LillOA]
  126. A. Lucherini, H.Y. Lam, M. Jimenez, F. Samyn, S. Bourbigot, C. Maluk, C. Maluk, Fire Testing of Intumescent Coatings: Comparison Between Bench-Scale Furnace and Radiant Panels Experimental Methodologies, Fire Technology (2022), [doi: 10.1007/s10694-022-01216-3, LillOA]
  127. J. Lu, Y. Huang, P. Jiang, Z. Chen, S. Bourbigot, G. Fontaine, L. Chang, L. Zhang, F. Pan, Universal circulating impregnation method for the fabrication of durable flame-retardant plywood with low hygroscopicity and leaching resistance, Polymer Degradation and Stability 195, 109799 (2022), [doi: 10.1016/j.polymdegradstab.2021.109799, LillOA]
  128. M. Dieng, M. Bensifia, J. Borme, I. Florea, C.M. Abreu, c. Jama, C. Léonard, P. Alpuim, D. Pribat, A. Yassar, F.Z. Bouanis, Wet-Chemical Noncovalent Functionalization of CVD Graphene: Molecular Doping and Its Effect on Electrolyte-Gated Graphene Field-Effect Transistor Characteristics, The Journal of Physical Chemistry C (2022), [doi: 10.1021/acs.jpcc.1c10737, LillOA]
  129. M. Salihi, M. El Fiti, Y. Harmen, Y. Chhiti, A. Chebak, F.E. M’Hamdi Alaoui, M. Achak, F. Bentiss, C. Jama, Evaluation of global energy performance of building walls integrating PCM: Numerical study in semi-arid climate in Morocco, Case Studies in Construction Materials 16, e00979 (2022), [doi: 10.1016/j.cscm.2022.e00979, LillOA]
  130. J. Ingrin, Is there a new performance indicator for reviewers on the rise?, Elements 17;6, 422 (2022), [LillOA]
  131. X. Jin, S. Cui, S. Sun, J. Sun, S. Zhang, W. Tang, S. Bourbigot, The preparation of polyamide 11 composites with extremely long ignition time, Polymers for Advanced Technologies (2022), [doi: 10.1002/pat.5593, LillOA]
  132. Q. Lin, P. Jiang, S. Ren, S. Liu, Y. Ji, Y. Huang, W. Yu, G. Fontaine, S. Bourbigot, Advanced functional materials based on bamboo cellulose fibers with different crystal structures, Composites Part A: Applied Science and Manufacturing 154, 106758 (2022), [doi: 10.1016/j.compositesa.2021.106758, LillOA]
  133. S.M. Seraji, P. Song, R.J. Varley, S. Bourbigot, D. Voice, H. Wang, Fire-retardant unsaturated polyester thermosets: The state-of-the-art, challenges and opportunities, Chemical Engineering Journal 430;Part 2, 132785 (2022), [doi: 10.1016/j.cej.2021.132785, LillOA]
  134. J.-E. Potaufeux, G. Rapp, S. Barrau, G. Liu, C. Zhang, E.P. Giannelis, D. Notta-Cuvier, F. Lauro, J.-M. Raquez, J. Odent, S. Therias, Influence of photooxidation on ionic reversible interactions of ionic poly(ether urethane)/silica hybrids, Polymer Degradation and Stability 197, 109872 (2022), [doi: 10.1016/j.polymdegradstab.2022.109872, LillOA]
  135. T. Lesage, M.-N. Avettand-Fènoël, D. Balloy, S. Assaf, F. Cristofari, P. Secordel, Head check resistance of B320 bainitic rail steel grade, Materials Today Communications 31, 103259 (2022), [doi: 10.1016/j.mtcomm.2022.103259, LillOA]
  136. J. Zhang, Y. Liu, C. Hu, Y. Jiang, A. Addad, G. Ji, C. Song, Q. Zhai, J. Zhang, The effect of Cr content on intragranular κ-carbide precipitation in Fe-Mn-Al-(Cr)-C low-density steels: A multiscale investigation, Materials Characterization 186, 111801 (2022), [doi: 10.1016/j.matchar.2022.111801, LillOA]
  137. J. Ingrin, About the overplayed role of citation indicators, Elements 17;5, 359 (2022), [LillOA]
  138. M. Liu, G. Zhang, J. Xiao, R. Jeantet, G. Delaplace, Y. Wang, Z. Dong, X. Chen, Mixing intensification with soft-elastic baffle (SEB) in a soft-elastic reactor (SER), Chemical Engineering and Processing: Process Intensification 108764 (2022), [doi: 10.1016/j.cep.2021.108764, LillOA]
  139. M. Najib, F. Bray, S. Khelissa, S. Flament, E. Richard, K. El Omari, C. Rolando, G. Delaplace, M. Hamze, N.-E. Chihib, Effect of milk heat treatment on molecular interactions during the process of Qishta, a Lebanese dairy product, International Dairy Journal 124, 105150 (2022), [doi: 10.1016/j.idairyj.2021.105150, LillOA]
  140. H. Dallagi, F. Aloui, L. Bouvier, L. Wauquier, T. Benezech, Numerical and experimental investigations into the rheological behaviour of wet foam flowing under a fence, FOOD AND BIOPRODUCTS PROCESSING (2022), [doi: 10.1016/j.fbp.2021.12.009, LillOA]
  141. H. Dallagi, C. Faille, L. Bouvier, M. Deleplace, T. Dubois, F. Aloui, T. Benezech, M. Deleplace, Wet foam flow: A suitable method for improving surface hygiene in the food industry, Journal of Food Engineering 322, 110976 (2022), [doi: 10.1016/j.jfoodeng.2022.110976, LillOA]
  142. J. Zhang, Y. Liu, C. Hu, A. Addad, A. Montagne, G. Ji, C. Song, Q. Zhai, J. Zhang, Probing the effect of intragranular premature κ-carbide on incipient plasticity behavior in austenite-based Fe-Mn-Al-(Cr)-C steels, Materials Research Letters 10;3, 141-148 (2022), [doi: 10.1080/21663831.2022.2027034, LillOA]
  143. Y. Guinet, L. Paccou, F. Danede, A. Hedoux, Revisiting the phase transition sequence in L-methionine: Description of the disordering mechanism in an essential amino acid, Journal of Chemical Physics 156;3, 034501 (2022), [doi: 10.1063/5.0077743, LillOA]
  144. C. Thenot, R. Besson, P. Sallot, J.-P. Monchoux, D. Connétable, Interactions of oxygen with intrinsic defects in L10 gamma-TiAl in presence of substitutional solutes: Influence on diffusion kinetics, Computational Materials Science 201, 110933 (2022), [doi: 10.1016/j.commatsci.2021.110933, LillOA]
  145. E. Dudognon, F. Danede, M. Guerain, Milling-induced Phase Transformations, Underlying Mechanisms and Resulting Physical States in an Enantiotropic System: the Case of Bezafibrate, Crystal Growth & Design 22;1, 363-378 (2022), [doi: 10.1021/acs.cgd.1c00997, LillOA]
  146. R. Besson, Ordering and phase separation in multi-principal-element metallic alloys: Contribution from mean-field atomic-scale modelling and simulation, Journal of Alloys and Compounds 898, 162842 (2022), [doi: 10.1016/j.jallcom.2021.162842, LillOA]
  147. H. Idrissi, P. Carrez, P. Cordier, On amorphization as a deformation mechanism under high stresses, Current Opinion in Solid State and Materials Science 26;1, 100976 (2022), [doi: 10.1016/j.cossms.2021.100976, LillOA]
  148. B. Moutamenni, N. Tabary, L. Paccou, Y. Guinet, A. Hedoux, MAL: High performance method for loading hydrophobic molecular materials into MCM-41 mesoporous silica – Analysis of confined L-tryptophan by Raman spectroscopy, Journal of Molecular Structure 1254, 132383 (2022), [doi: 10.1016/j.molstruc.2022.132383, LillOA]
  149. M. Choël, A. Ivanovsky, A. Roose, M. Hamze, A.-M. Blanchenet, N. Visez, Quantitative assessment of coagulation of atmospheric particles onto airborne birch pollen grains, Journal of Aerosol Science 161, 105944 (2022), [doi: 10.1016/j.jaerosci.2021.105944, LillOA]
  150. T. Stasiak, M.-A. Sow, A. Addad, M. Touzin, f. béclin, C. CORDIER, Processing and Characterization of a Mechanically Alloyed and Hot Press Sintered High Entropy Alloy from the Al-Cr-Fe-Mn-Mo Family, JOM (2022), [doi: 10.1007/s11837-021-05109-8, LillOA]
  151. K. Bourahla, Y. Lemmouchi, c. Jama, C. Rolando, A. Mazzah, Grafting of amine functions on cellulose acetate fibers by branched polyethylenimine coating, Reactive and Functional Polymers 170, 105107 (2022), [doi: 10.1016/j.reactfunctpolym.2021.105107, LillOA]
  152. P.-M. Zanetta, C. Le Guillou, H. Leroux, B. Zanda, R. Hewins, G. Bellino, Processes and temperatures of FGR formation in chondrites, Geochimica et Cosmochimica Acta 319, 94-117 (2022), [doi: 10.1016/j.gca.2021.11.019, LillOA]
  153. P.-K. Jha, H. Dallagi, E. Richard, M. Deleplace, T. Benezech, C. Faille, Does the vertical vs horizontal positioning of surfaces affect either biofilm formation on different materials or their resistance to detachment?, Food Control 133, 108646 (2022), [doi: 10.1016/j.foodcont.2021.108646, LillOA]
  154. S. Dimassi, N. Tabary, F. Chai, C. Zobrist, J.-C. Hornez, F. Cazaux, N. Blanchemain, B. Martel, Polydopamine treatment of chitosan nanofibers for the conception of osteoinductive scaffolds for bone reconstruction, Carbohydrate Polymers 276, 118774 (2022), [doi: 10.1016/j.carbpol.2021.118774, LillOA]
 
 
UMET - Unité Matériaux et Transformations
CNRS UMR 8207
Université de Lille
Bâtiment C6
59655 Villeneuve d'Ascq
France
Version 3.0
Mentions Légales - Contacter le webmaster